VCarveParameterData

This object is used to hold the settings for a profile toolpath.

Constructor

ProfileParameterData() - Constructor Create a new object ready to have its parameters set

For Example:

local profile_data = ProfileParameterData() 

VCarveParameterData()

Create a new object ready to have its parameters set

For Example:

local vcarve_data = VCarveParameterData() 

Properties

.FlatDepth

Interaction: Read and Write

Returns:

.Allowance

Returns: (double) allowance to leave on profile when calculating toolpath

.AllowanceFormula

Interaction: Read and Write

Returns: (string) Formula for allowance to leave on profile when calculating toolpath

.CutDepth

Interaction: Read and Write Returns: (double) Final cutting depth below start depth

.CornerSharpen

Interaction: Read and Write

Returns: (bool) True if want to create 3D ‘corner sharpening’ moves for internal corners

.CreateSquareCorners

Interaction: Read and Write

Returns: (bool) true if want to create ‘square’ external corners

.CutDepthFormula

Interaction: Read and Write Returns: (string) Optional formula for final cutting depth below start depth. The formula is the same as can be entered in the CutDepth field on the normal toolpath page and has access to the same variables (e.g “z * 0.5” to set cut depth to half the material thickness).

.CutDirection

Interaction: Read and Write Returns: (integer) Cutting direction for toolpath. Valid values are ...

ProfileParameterData.CLIMB_DIRECTION
ProfileParameterData.CONVENTIONAL_DIRECTION

.KeepStartPoints

Interaction: Read and Write Returns: (bool) If true, start points of vectors are maintained, else start points are optimised

.Name

Interaction: Read and Write Returns: (string) The name for the toolpath

.ProfileSide

Interaction: Read and Write Returns: (integer) Side of the vector to cut on. Valid values are ... ProfileParameterData.PROFILE_OUTSIDE ProfileParameterData.PROFILE_INSIDE ProfileParameterData.PROFILE_ON

.ProjectToolpath

Interaction: Read and Write Returns: (bool) If true and used with Aspire, toolpath is projected onto model surface after calculation

.StartDepth

R/W - double - Start depth for toolpath below material surface

.StartDepthFormula Interaction: Read and Write Returns: (string) Optional formula for start depth for toolpath below material surface. The formula is the same as can be entered in the Start Depth field on the normal toolpath page and has access to the same variables (e.g “z * 0.5” to set start depth to half the material thickness).

.UseAreaClearTool

Interaction: Read and Write

Returns: (bool) If true, the area clearance tool will be used to clear the flat areas of the toolpath

For Example:

    -- Create object used to pass profile options
 local profile_data = ProfileParameterData()
 -- start depth for toolpath
 profile_data.StartDepth = start_depth

 -- cut depth for toolpath this is depth below start depth
 profile_data.CutDepth = cut_depth

 -- direction of cut - ProfileParameterData.CLIMB_DIRECTION or
 -- ProfileParameterData.CONVENTIONAL_DIRECTION
 profile_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION

 -- side we machine on - ProfileParameterData.PROFILE_OUTSIDE,
 -- ProfileParameterData.PROFILE_INSIDE or ProfileParameterData.PROFILE_ON
 profile_data.ProfileSide = ProfileParameterData.PROFILE_OUTSIDE

 -- Allowance to leave on when machining
 profile_data.Allowance = 0.0

 -- true to preserve start point positions, false to reorder start points to
 -- minimise toolpath length
 profile_data.KeepStartPoints = false

 -- true if want to create 'square' external corners on toolpath
 profile_data.CreateSquareCorners = false

 -- true to perform corner sharpening on internal corners (only with v-bits)
 profile_data.CornerSharpen = false


 -- if true in Aspire, project toolpath onto composite model
 profile_data.ProjectToolpath = false 

References

Please Note: The base material for the contents found in this WiKi was sourced from Vectric Lua Interface for Gadgets, version 2.05, published September 12, 2018. by Vectric Ltd. Most current document from Vertric can be downloaded at Vertric Developer Information