JimAndi Toolbox
Jump to navigation
Jump to search
Table and Array Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
JimAndi Toolbox
-- =====================================================]]
╔╦╗╔═╗╔╗ ╦ ╔═╗ ╔═╗╔╗╔╔╦╗ ╔═╗╦═╗╦═╗╔═╗╦ ╦ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ╠═╣╠╩╗║ ║╣ ╠═╣║║║ ║║ ╠═╣╠╦╝╠╦╝╠═╣╚╦╝ ║ ║ ║║ ║║ ╚═╗
╩ ╩ ╩╚═╝╩═╝╚═╝ ╩ ╩╝╚╝═╩╝ ╩ ╩╩╚═╩╚═╩ ╩ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function ArrayTools()
-- =====================================================]]
function ArrayClear(arrayName)
for _,v in ipairs(arrayName) do
table.remove(arrayName, i)
end -- for end
return true
end -- function end
-- =====================================================]]
function NameCheck(Name, Defalt, ListName) -- Checks if Name in in the list of it is default name
if Name ~= Defalt then
for i=1, ListName do
if Name == i then
return true
end
end
return false
else
return true
end
end -- NameCheck function end
-- =====================================================]]
function RemoveDuplicates(tab, order) -- returns table of unique items in "A" acending or "D" decending
local hashSet = {}
local new = {}
local value
for i = 1, #tab do
value = (tab[i])
if hashSet[value] == nil then
table.insert(new, value)
hashSet[value] = true
end
end
if string.upper(order) =="A" then
table.sort(new)
else
table.sort(new, function(a, b) return a > b end)
end
return new
end
-- =====================================================]]
function RemoveTableItem(tabName, tabItem)
for x = 1 in ipairs(tabName) do
if tabName[x] == tabItem then
table.remove(tabName, i)
end
end -- for end
return true
end -- function end
-- =====================================================]]
function TableLength(tbl) -- tbl returns table count
-- tbl = {7, 6, 5, 4, 3, 2, 1}
local count = 0
for _ in pairs(tbl) do
count = count + 1
end
return count
end
-- =====================================================]]
function FindDups(checktbl, duptbl, cleantbl) -- Find all duplicate items and returns both dup and clean tables
function tLength(tbl) -- tLength returns table count
local count = 0
for _ in pairs(tbl) do
count = count + 1
end
return count
end
-- =================================
local trip = false
for i=1, tLength(checktbl) do
for x=1, tLength(cleantbl) do
if cleantbl[x] == checktbl[i] then
trip = true
end
end
if trip then
table.insert(duptbl, checktbl[i])
else
table.insert(cleantbl, checktbl[i])
end
trip = false
end
return table.sort(duptbl), table.sort(cleantbl) -- returns both dup and clean table
end -- function end
-- =====================================================]]
function ReverseTable(tbl) -- Reverse table order
--tbl = {7, 6, 7, A, 5, 4, 3, A, 2, 1}
local n = #tbl
local i = 1
while i < n do
tbl[i],tbl[n] = tbl[n],tbl[i]
i = i + 1
n = n - 1
end
return tbl
end
-- =====================================================]]
end -- ArrayTools function end
Conversion Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔═╗╔═╗╔╗╔╦ ╦╔═╗╦═╗╔╦╗╦╔═╗╔╗╔ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ║ ║║║║╚╗╔╝║╣ ╠╦╝ ║ ║║ ║║║║ ║ ║ ║║ ║║ ╚═╗
╚═╝╚═╝╝╚╝ ╚╝ ╚═╝╩╚═ ╩ ╩╚═╝╝╚╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function ConvertingTools()
-- ====================================================]]
function bool2S(x) -- Converts true or false to text
if x then
return "true"
else
return "false"
end
end --function end
-- =====================================================]]
function D2S8(d) -- Converts a Number (Double) to a String with 8 places
return string.format("%.8f", d)
end -- function end
-- =====================================================]]
function D2S4(d) -- Converts a Number (Double) to a String with 4 places
return string.format("%.4f", d)
end -- function end
-- =====================================================]]
function toint(number)
return math.floor(tonumber(number) or error("Could not cast '" .. tostring(number) .. "' to number.'"))
end
-- =====================================================]]
function Rounder(num, idp) -- Rounds a Number (Double) up or down
return tonumber(string.format("%." .. (idp or 0) .. "f", num))
end -- end function
-- =====================================================]]
function RUsame(num, comp) -- Rounds a Number (Double) up or down
local function toint(number)
return math.floor(tonumber(number) or error("Could not cast '" .. tostring(number) .. "' to number.'"))
end
local function Rounder(num, idp) -- Rounds a Number (Double) up or down
return tonumber(string.format("%." .. (idp or 0) .. "f", num))
end -- end function
num = math.abs(num)
local idp = #comp
local Mynum = Rounder(num, idp)
local Myint = toint(Mynum)
local Myval = tonumber(tostring(Myint) .. "." .. comp)
if (Mynum == Myval) then
return true
else
return false
end -- if end
end -- end function
-- =====================================================]]
function WithIn(Num, Mat, Tol) -- Retuns true if number is within tolerance with match
if ((Num >= (Mat - Tol)) and (Num <= (Mat + Tol))) then
return true
end -- if end
return false
end -- end function
-- =====================================================]]
function Double2Fraction(Num) -- Converts a Measurement (Double) to a Fractional String
local Frac = "Error"
if Num then
Frac = tostring(Num)
end
if (not Milling.Unit) and Num then
local AmountValuex = math.floor(math.abs(Num))
local DicValue = Num - AmountValuex
local AmountValue = tostring(AmountValuex)
Frac = tostring(DicValue)
if Project.Fractions == "No Fractions" then
Frac = tostring(Num)
elseif Project.Fractions == "1/8" then
if DicValue >= 0.9375 then
AmountValue = tostring(AmountValuex + 1)
Frac = "0"
elseif DicValue >= 0.8125 then Frac = "7/8" .. string.char(34)
elseif DicValue >= 0.6875 then Frac = "3/4" .. string.char(34)
elseif DicValue >= 0.5625 then Frac = "5/8" .. string.char(34)
elseif DicValue >= 0.4375 then Frac = "1/2" .. string.char(34)
elseif DicValue >= 0.3125 then Frac = "3/8" .. string.char(34)
elseif DicValue >= 0.1875 then Frac = "1/4" .. string.char(34)
elseif DicValue >= 0.0625 then Frac = "1/8" .. string.char(34)
else
Frac = "0"
end
elseif Project.Fractions == "1/16" then
if DicValue >= 0.96875 then
AmountValue = tostring(AmountValuex + 1)
Frac = "0"
elseif DicValue >= 0.90625 then Frac = "15/16" .. string.char(34)
elseif DicValue >= 0.84375 then Frac = "7/8" .. string.char(34)
elseif DicValue >= 0.78125 then Frac = "13/16" .. string.char(34)
elseif DicValue >= 0.71875 then Frac = "3/4" .. string.char(34)
elseif DicValue >= 0.65625 then Frac = "11/16" .. string.char(34)
elseif DicValue >= 0.59375 then Frac = "5/8" .. string.char(34)
elseif DicValue >= 0.53125 then Frac = "9/16" .. string.char(34)
elseif DicValue >= 0.46875 then Frac = "1/2" .. string.char(34)
elseif DicValue >= 0.40625 then Frac = "7/16" .. string.char(34)
elseif DicValue >= 0.34375 then Frac = "3/8" .. string.char(34)
elseif DicValue >= 0.28125 then Frac = "5/16" .. string.char(34)
elseif DicValue >= 0.21875 then Frac = "1/4" .. string.char(34)
elseif DicValue >= 0.15625 then Frac = "3/16" .. string.char(34)
elseif DicValue >= 0.09375 then Frac = "1/8" .. string.char(34)
elseif DicValue >= 0.03125 then Frac = "1/16" .. string.char(34)
else
Frac = "0"
end -- If end
elseif Project.Fractions == "1/32" then
if DicValue >= 0.984375 then
AmountValue = tostring(AmountValuex + 1)
Frac = "0"
elseif DicValue >= 0.953126 then Frac = "31/32" .. string.char(34)
elseif DicValue >= 0.921876 then Frac = "15/16" .. string.char(34)
elseif DicValue >= 0.890626 then Frac = "29/32" .. string.char(34)
elseif DicValue >= 0.859376 then Frac = "7/8" .. string.char(34)
elseif DicValue >= 0.828126 then Frac = "27/32" .. string.char(34)
elseif DicValue >= 0.796876 then Frac = "13/16" .. string.char(34)
elseif DicValue >= 0.765626 then Frac = "25/32" .. string.char(34)
elseif DicValue >= 0.737376 then Frac = "3/4" .. string.char(34)
elseif DicValue >= 0.703126 then Frac = "23/32" .. string.char(34)
elseif DicValue >= 0.671876 then Frac = "11/16" .. string.char(34)
elseif DicValue >= 0.640626 then Frac = "21/32" .. string.char(34)
elseif DicValue >= 0.609376 then Frac = "5/8" .. string.char(34)
elseif DicValue >= 0.578126 then Frac = "19/32" .. string.char(34)
elseif DicValue >= 0.541260 then Frac = "9/16" .. string.char(34)
elseif DicValue >= 0.515626 then Frac = "17/32" .. string.char(34)
elseif DicValue >= 0.484376 then Frac = "1/2" .. string.char(34)
elseif DicValue >= 0.468760 then Frac = "15/32" .. string.char(34)
elseif DicValue >= 0.421876 then Frac = "7/16" .. string.char(34)
elseif DicValue >= 0.390626 then Frac = "13/32" .. string.char(34)
elseif DicValue >= 0.359376 then Frac = "3/8" .. string.char(34)
elseif DicValue >= 0.328126 then Frac = "11/32" .. string.char(34)
elseif DicValue >= 0.296876 then Frac = "5/16" .. string.char(34)
elseif DicValue >= 0.265626 then Frac = "9/32" .. string.char(34)
elseif DicValue >= 0.234376 then Frac = "1/4" .. string.char(34)
elseif DicValue >= 0.203126 then Frac = "7/32" .. string.char(34)
elseif DicValue >= 0.171876 then Frac = "3/16" .. string.char(34)
elseif DicValue >= 0.140626 then Frac = "5/32" .. string.char(34)
elseif DicValue >= 0.109376 then Frac = "1/8" .. string.char(34)
elseif DicValue >= 0.078126 then Frac = "3/32" .. string.char(34)
elseif DicValue >= 0.046876 then Frac = "1/16" .. string.char(34)
elseif DicValue >= 0.015626 then Frac = "1/32" .. string.char(34)
else
Frac = "0"
end -- If end
elseif Project.Fractions == "1/64" then
if DicValue >= 0.9921875 then
AmountValue = tostring(AmountValuex + 1)
Frac = "0"
elseif DicValue >= 0.9765625 then Frac = "62/64" .. string.char(34)
elseif DicValue >= 0.9609375 then Frac = "31/32" .. string.char(34)
elseif DicValue >= 0.9453125 then Frac = "61/64" .. string.char(34)
elseif DicValue >= 0.9296875 then Frac = "15/16" .. string.char(34)
elseif DicValue >= 0.9140625 then Frac = "59/64" .. string.char(34)
elseif DicValue >= 0.8984375 then Frac = "29/32" .. string.char(34)
elseif DicValue >= 0.8828125 then Frac = "57/64" .. string.char(34)
elseif DicValue >= 0.8671875 then Frac = "7/8" .. string.char(34)
elseif DicValue >= 0.8515625 then Frac = "55/64" .. string.char(34)
elseif DicValue >= 0.8359375 then Frac = "27/32" .. string.char(34)
elseif DicValue >= 0.8203125 then Frac = "53/64" .. string.char(34)
elseif DicValue >= 0.8046875 then Frac = "13/16" .. string.char(34)
elseif DicValue >= 0.7890625 then Frac = "51/64" .. string.char(34)
elseif DicValue >= 0.7734375 then Frac = "25/32" .. string.char(34)
elseif DicValue >= 0.7578125 then Frac = "49/64" .. string.char(34)
elseif DicValue >= 0.7421875 then Frac = "3/4" .. string.char(34)
elseif DicValue >= 0.7265625 then Frac = "47/64" .. string.char(34)
elseif DicValue >= 0.7109375 then Frac = "23/32" .. string.char(34)
elseif DicValue >= 0.6953125 then Frac = "45/64" .. string.char(34)
elseif DicValue >= 0.6796875 then Frac = "11/16" .. string.char(34)
elseif DicValue >= 0.6640625 then Frac = "43/64" .. string.char(34)
elseif DicValue >= 0.6484375 then Frac = "21/32" .. string.char(34)
elseif DicValue >= 0.6328125 then Frac = "41/64" .. string.char(34)
elseif DicValue >= 0.6171875 then Frac = "5/8" .. string.char(34)
elseif DicValue >= 0.6015625 then Frac = "39/64" .. string.char(34)
elseif DicValue >= 0.5859375 then Frac = "19/32" .. string.char(34)
elseif DicValue >= 0.5703125 then Frac = "37/64" .. string.char(34)
elseif DicValue >= 0.5546875 then Frac = "9/16" .. string.char(34)
elseif DicValue >= 0.5390625 then Frac = "35/64" .. string.char(34)
elseif DicValue >= 0.5234375 then Frac = "17/32" .. string.char(34)
elseif DicValue >= 0.5078125 then Frac = "33/64" .. string.char(34)
elseif DicValue >= 0.4921875 then Frac = "1/2" .. string.char(34)
elseif DicValue >= 0.4765625 then Frac = "31/64" .. string.char(34)
elseif DicValue >= 0.4609375 then Frac = "15/32" .. string.char(34)
elseif DicValue >= 0.4453125 then Frac = "29/32" .. string.char(34)
elseif DicValue >= 0.4296875 then Frac = "7/16" .. string.char(34)
elseif DicValue >= 0.4140625 then Frac = "27/64" .. string.char(34)
elseif DicValue >= 0.3984375 then Frac = "13/32" .. string.char(34)
elseif DicValue >= 0.3828125 then Frac = "25/64" .. string.char(34)
elseif DicValue >= 0.3671875 then Frac = "3/8" .. string.char(34)
elseif DicValue >= 0.3515625 then Frac = "23/64" .. string.char(34)
elseif DicValue >= 0.3359375 then Frac = "11/32" .. string.char(34)
elseif DicValue >= 0.3203125 then Frac = "21/64" .. string.char(34)
elseif DicValue >= 0.3046875 then Frac = "5/16" .. string.char(34)
elseif DicValue >= 0.2890625 then Frac = "19/64" .. string.char(34)
elseif DicValue >= 0.2734375 then Frac = "9/32" .. string.char(34)
elseif DicValue >= 0.2578125 then Frac = "17/64" .. string.char(34)
elseif DicValue >= 0.2421875 then Frac = "1/4" .. string.char(34)
elseif DicValue >= 0.2265625 then Frac = "15/64" .. string.char(34)
elseif DicValue >= 0.2109375 then Frac = "7/32" .. string.char(34)
elseif DicValue >= 0.1953125 then Frac = "13/64" .. string.char(34)
elseif DicValue >= 0.1796875 then Frac = "3/16" .. string.char(34)
elseif DicValue >= 0.1640625 then Frac = "11/64" .. string.char(34)
elseif DicValue >= 0.1484375 then Frac = "5/32" .. string.char(34)
elseif DicValue >= 0.1328125 then Frac = "9/64" .. string.char(34)
elseif DicValue >= 0.1171875 then Frac = "1/8" .. string.char(34)
elseif DicValue >= 0.1015625 then Frac = "7/64" .. string.char(34)
elseif DicValue >= 0.0859375 then Frac = "3/32" .. string.char(34)
elseif DicValue >= 0.0703125 then Frac = "5/64" .. string.char(34)
elseif DicValue >= 0.0546875 then Frac = "1/16" .. string.char(34)
elseif DicValue >= 0.0390625 then Frac = "3/64" .. string.char(34)
elseif DicValue >= 0.0234375 then Frac = "1/32" .. string.char(34)
elseif DicValue >= 0.0078125 then Frac = "1/64" .. string.char(34)
else
Frac = "0"
end -- If end
end
if Project.Fractions == "No Fractions" then
Frac = tostring(Num)
else
if Frac == "0" then
Frac = AmountValue .. string.char(34)
else
if AmountValue ~= "0" then
Frac = AmountValue .. "-" .. Frac
end
end
end
end
return Frac
end -- function end
-- =====================================================]]
end -- Convert Tools end
Time and Date Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╦╔╦╗╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ║║║║║╣ ║ ║ ║║ ║║ ╚═╗
╩ ╩╩ ╩╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function DateTimeTools()
-- =====================================================]]
function StartDateTime(LongShort)
--[[ Date Value Codes
-- | %a abbreviated weekday name (e.g., Wed)
-- | %A full weekday name (e.g., Wednesday)
-- | %b abbreviated month name (e.g., Sep)
-- | %B full month name (e.g., September)
-- | %c date and time (e.g., 09/16/98 23:48:10)
-- | %d day of the month (16) [01-31]
-- | %H hour, using a 24-hour clock (23) [00-23]
-- | %I hour, using a 12-hour clock (11) [01-12]
-- | %M minute (48) [00-59]
-- | %m month (09) [01-12]
-- | %p either "am" or "pm" (pm)
-- | %S second (10) [00-60]
-- | %w weekday (3) [0-6 = Sunday-Saturday]
-- | %x date (e.g., 09/16/98)
-- | %X time (e.g., 23:48:10)
-- | %Y full year (e.g., 1998)
-- | %y two-digit year (98) [00-99]
-- | %% the character `%´ ]]
if LongShort then
return os.date("%b %d, %Y") .. " - " .. os.date("%I") .. ":" .. os.date("%m") .. os.date("%p")
else
return os.date("%Y%m%d%H%M")
end
end
-- =====================================================]]
function StartDate(LongShort)
--[[ Date Value Codes
-- | %a abbreviated weekday name (e.g., Wed)
-- | %A full weekday name (e.g., Wednesday)
-- | %b abbreviated month name (e.g., Sep)
-- | %B full month name (e.g., September)
-- | %c date and time (e.g., 09/16/98 23:48:10)
-- | %d day of the month (16) [01-31]
-- | %H hour, using a 24-hour clock (23) [00-23]
-- | %I hour, using a 12-hour clock (11) [01-12]
-- | %M minute (48) [00-59]
-- | %m month (09) [01-12]
-- | %p either "am" or "pm" (pm)
-- | %S second (10) [00-60]
-- | %w weekday (3) [0-6 = Sunday-Saturday]
-- | %x date (e.g., 09/16/98)
-- | %X time (e.g., 23:48:10)
-- | %Y full year (e.g., 1998)
-- | %y two-digit year (98) [00-99]
-- | %% the character `%´ ]]
if LongShort then
return os.date("%b %d, %Y") -- "Sep 01, 2022"
else
return os.date("%Y%m%d") -- "20220901"
end
end
-- ====================================================]]
function Wait(time)
local duration = os.time() + time
while os.time() < duration do end
end
-- =====================================================]]
end -- Date Time Tools function end
Debugging Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╔═╗╔╗ ╦ ╦╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║║╣ ╠╩╗║ ║║ ╦ ║ ║ ║║ ║║ ╚═╗
═╩╝╚═╝╚═╝╚═╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function DebugTools()
-- =====================================================]]
function DMark(Note, Pt)
--[[-- ==MarkPoint==
| Code sourced from Vectric Lua Interface for Gadgets, version 2.05, published September 12, 2018. by Vectric Ltd.
| Draws mark on the drawing
| call = DebugMarkPoint("Note: Hi", Pt1)
]]
local function DrawCircle(job, Cpt, CircleRadius, LayerName) -- Draws a circle
--[[ draws a circle based on user inputs
| job - current validated job unique ID
| Cpt - (2Dpoint) center of the circle
| CircleRadius - radius of the circle
| Layer - layer name to draw circle (make layer if not exist)
]]
local pa = Polar2D(Cpt, 180.0, CircleRadius)
local pb = Polar2D(Cpt, 0.0, CircleRadius)
local line = Contour(0.0)
line:AppendPoint(pa); line:ArcTo(pb,1); line:ArcTo(pa,1)
local layer = job.LayerManager:GetLayerWithName(LayerName)
layer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- ====]]
local BubbleSize = 1.25
if not Project.DebugAngle then
Project.DebugAngle = 0.0
end
Project.DebugAngle = Project.DebugAngle + 2.0
if Project.DebugAngle >= 90.0 and Project.DebugAngle <= 358.0 then
Project.DebugAngle = 272.0
elseif Project.DebugAngle >= 360.0 then
Project.DebugAngle = 2.0
end
if Pt then
local job = VectricJob()
local Pt1 = Polar2D(Pt, Project.DebugAngle, BubbleSize)
local Pt2 = Polar2D(Pt1, 0.0, BubbleSize * 0.25)
local Pt3 = Polar2D(Pt2, 315.0, BubbleSize * 0.0883883476483188 * 4.0)
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName("Debug")
line:AppendPoint(Pt)
line:LineTo(Pt1)
line:LineTo(Pt2)
layer:AddObject(CreateCadContour(line), true)
DrawWriter(Note, Pt3, BubbleSize * 0.5, "Debug", 0.0)
DrawCircle(job, Pt, BubbleSize * 0.5, "Debug")
else
DisplayMessageBox("Issue with Point for - " .. Note)
end
return true
end -- function end
-- =====================================================]]
function StatusMessage(Type, Header, Question, ErrorNumber)
--[[
Useage: type Header Info Question or Message Err No.
StatusMessage("Error", "Base Cabinet Settings", "Face Frame Bottom Rail Width - value cannot be 0.", "(9000)")
Note: if the debug flag is on (true) a message box shows the message length, dialog size and error number
]]
local dialog
local X = 460
local Y = 124
local step = 35
Question = WrapString(Question, step)
local QL = string.len(Question)
if (QL > step) and (QL < step * 2) then
Y = Y + 12
elseif (QL > (step * 2) +1) and (QL < 105) then
Y = Y + 24
elseif (QL > (step * 3) +1) and (QL < (step * 4)) then
Y = Y + 36
elseif (QL > (step * 4) +1) and (QL < (step * 5)) then
Y = Y + 48
elseif (QL > (step * 5) +1) and (QL < (step * 6)) then
Y = Y + 60
elseif (QL > (step * 6) +1) and (QL < (step * 7)) then
Y = Y + 72
elseif (QL > (step * 7) +1) and (QL < (step * 8)) then
Y = Y + 84
elseif (QL > (step * 8) +1) and (QL < (step * 9)) then
Y = Y + 96
elseif (QL > (step * 9) +1) and (QL < (step * 10)) then
Y = Y + 108
elseif (QL > (step * 10) +1) and (QL < (step * 11)) then
Y = Y + 120
else
Y = Y + 150
end
if Project.Debugger then
Queston = Question .. " - " .. ErrorNumber
end
if Type == "Alert" then
dialog = HTML_Dialog(true, DialogWindow.myHtml16, X, Y, Header)
else -- "Error"
dialog = HTML_Dialog(true, DialogWindow.myHtml17, X, Y, Header)
end -- if end
if Project.Debugger then
Question = Question .. " " .. ErrorNumber
end
dialog:AddLabelField("Question", Type .. ": " .. Question)
dialog:ShowDialog()
if Project.Debugger then
DisplayMessageBox("Question Len " .. " = " .. tostring(string.len(Question)) .. ": \nWindow = " .. tostring(dialog.WindowWidth) .. " x " .. tostring(dialog.WindowHeight))
end
return true
end
-- =====================================================]]
function DebugMarkPoint(Note, Pt, Size, LayerName)
--[[-- ==MarkPoint==
| Code sourced from Vectric Lua Interface for Gadgets, version 2.05, published September 12, 2018. by Vectric Ltd.
| Draws mark on the drawing
| call = DebugMarkPoint("Note: Hi", Pt1, 0.125, "Jim")
]]
if Size == nil then
Size = 0.125
end
if LayerName == nil then
LayerName = "Debug"
end
local function DrawCircle(job, Cpt, CircleRadius, LayerName) -- Draws a circle
-- | draws a circle based on user inputs
-- | job - current validated job unique ID
-- | Cpt - (2Dpoint) center of the circle
-- | CircleRadius - radius of the circle
-- | Layer - layer name to draw circle (make layer if not exist)
local pa = Polar2D(Cpt, 180.0, CircleRadius)
local pb = Polar2D(Cpt, 0.0, CircleRadius)
local line = Contour(0.0)
line:AppendPoint(pa); line:ArcTo(pb,1); line:ArcTo(pa,1)
local layer = job.LayerManager:GetLayerWithName(LayerName)
layer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- ====]]
local job = VectricJob()
local Pt1 = Polar2D(Pt, Project.DebugAngle, Size * 2.0)
local Pt2 = Polar2D(Pt1, 0.0, 0.500 * Size)
local Pt3 = Polar2D(Pt2, 315.0, (0.500 * Size) * 1.4142135623731)
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(LayerName)
line:AppendPoint(Pt)
line:LineTo(Pt1)
line:LineTo(Pt2)
layer:AddObject(CreateCadContour(line), true)
DrawWriter(Note, Pt3, Size, LayerName, 0.0)
DrawCircle(job, Pt, Size, LayerName)
return true
end -- function end
-- =====================================================]]
function ShowDialogSize() -- Returns Dialog X and Y size
DisplayMessageBox(tostring(dialog.WindowWidth) .. " x " .. tostring(dialog.WindowHeight))
end -- function end
-- =====================================================]]
end -- End Debug
Dialog and Menu Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╦╔═╗╦ ╔═╗╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║║╠═╣║ ║ ║║ ╦ ║ ║ ║║ ║║ ╚═╗
═╩╝╩╩ ╩╩═╝╚═╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function DialogTools()
-- =====================================================]]
function DialogSize(Str) -- Returns the X and Y value of the dialogue
local InText = string.find(string.upper(Str) , "X")
local DialogX = All_Trim(string.sub(Str, 1, InText - 1))
local DialogY = All_Trim(string.sub(Str, InText + 1))
return tonumber(DialogX), tonumber(DialogY)
end -- end function
-- =====================================================]]
function ProgressBarAmount(TotalRecords, Record) -- Calculates the percent amount of progression based on total process
--[[
local MyProgressBar
MyProgressBar = ProgressBar("Working", ProgressBar.LINEAR) -- Setup Type of progress bar
MyProgressBar:SetPercentProgress(0) -- Sets progress bar to zero
MyProgressBar:SetPercentProgress(ProgressAmount(Door.Records, myRecord)) -- sends percent of process progress bar (adds to the bar)
MyProgressBar:SetPercentProgress(ProgressAmount(12000, 416)) -- sends percent of process progress bar (adds to the bar)
MyProgressBar:SetText("Compete") -- Sets the label to Complete
MyProgressBar:Finished() -- Close Progress Bar
]]
local X1 = (100.0 / TotalRecords)
local X2 = X1 * Record
local X3 = math.abs(X2)
local X4 = (math.floor(X3))
return (math.floor(math.abs((100.0 / TotalRecords) * Record)))
end -- function end
-- =====================================================]]
function OnLuaButton_InquiryGearCalulate(dialog)
Gear.Addendum = dialog:GetDoubleField("Gear.Addendum")
Gear.Dedendum = dialog:GetDoubleField("Gear.Dedendum")
Gear.AddendumDiameter = dialog:GetDoubleField("Gear.AddendumDiameter")
Gear.DedendumDiameter = dialog:GetDoubleField("Gear.DedendumDiameter")
Gear.ToothTickness = dialog:GetDoubleField("Gear.ToothTickness")
Gear.Slotwidth = dialog:GetDoubleField("Gear.Slotwidth")
Gear.PitchAmount = dialog:GetDoubleField("Gear.PitchAmount")
Gear.FilletRadius = dialog:GetDoubleField("Gear.FilletRadius")
Gear.ToplandAmount = dialog:GetDoubleField("Gear.ToplandAmount")
Gear.FaceFlankRadius = dialog:GetDoubleField("Gear.FaceFlankRadius")
Gear.ToothCount = dialog:GetDropDownListValue("Gear.ToothCount")
Gear.ShowLines = dialog:GetDropDownListValue("Gear.ShowLines")
dialog:UpdateDoubleField("Gear.Addendum", Gear.Addendum)
dialog:UpdateDoubleField("Gear.Dedendum", Gear.Dedendum)
dialog:UpdateDoubleField("Gear.AddendumDiameter", Gear.AddendumDiameter)
dialog:UpdateDoubleField("Gear.DedendumDiameter", Gear.DedendumDiameter)
dialog:UpdateDoubleField("Gear.ToothTickness", Gear.ToothTickness)
dialog:UpdateDoubleField("Gear.Slotwidth", Gear.Slotwidth)
dialog:UpdateDoubleField("Gear.PitchAmount", Gear.PitchAmount)
dialog:UpdateDoubleField("Gear.FilletRadius", Gear.FilletRadius)
dialog:UpdateDoubleField("Gear.ToplandAmount", Gear.ToplandAmount)
dialog:UpdateDoubleField("Gear.FaceFlankRadius", Gear.FaceFlankRadius)
return true
end -- function end
-- =====================================================]]
function InquiryDropList(Header, Quest, DX, DY, DList)
--[[
Drop list foe user input
Caller: local y = InquiryDropList("Cabinet Maker", "Select Cabinet Style", 290, 165, IniFile)
Dialog Header = "Cabinet Maker"
Quest = "Select Cabinet Style"
Selection Array = IniFile
Returns = String
]]
local myHtml = [[<!DOCTYPE HTML><html lang="en"><head><title>My List Box</title><style>.FormButton{font-weight:700;width:75px;font-size:12px;white-space:nowrap;font-family:Arial,Helvetica,sans-serif font-size: 12px}.h1-l{font-size:12px;font-weight:700;text-align:left;white-space:nowrap}.h1-c{font-size:12px;font-weight:700;text-align:center;white-space:nowrap}table{width:100%;border:0}body,td,th{background-color:#3a4660;background-position:center;overflow:hidden;font-family:arial,helvetica,sans-serif;font-size:12px;color:#fff;background-image:url(']].. DialogWindow.myBackGround ..[[')}html{overflow:hidden}</style></head><body><table><tr><td class="h1-l" id="Questions"><strong class="h2">Message Here</strong></td></tr><tr><td class="h1-c"><select name="DList" size="10" class="h1-c" id="ListBox"><option>My Default 1</option><option selected="selected">My Default 2</option><option>My Default 3</option><option>My Default 4</option></select></td></tr><tr><th class="h1-l" colspan="3" id="QuestionID"></th></tr></table><table><tr><td class="h1-c"><input id="ButtonCancel" class="FormButton" name="ButtonCancel" type="button" value="Cancel"></td><td></td><td class="h1-c"><input id="ButtonOK" class="FormButton" name="ButtonOK" type="button" value="OK"></td></tr></table></body></html>]] ;
local dialog = HTML_Dialog(true, myHtml, DX, DY, Header)
dialog:AddLabelField("Questions", Quest)
dialog:AddDropDownList("ListBox", "DEFAULT")
dialog:AddDropDownListValue("ListBox", "DEFAULT")
for index, value in pairs(DList) do
dialog:AddDropDownListValue("ListBox", value)
end
if not dialog:ShowDialog() then
return "."
else
return dialog:GetDropDownListValue("ListBox")
end
end
-- =====================================================]]
function InquiryFileBox(Header, Quest, DefaltPath)
--[[
Dialog Box for user to pick a file
Caller: local X = InquiryFileBox("Select File", "Where is the file location?", "C:\\")
Dialog Header = "File Name"
User Question = "Path name?"
Default Value = "C:\\"
Returns = String
]]
local myHtml = [[<html> <head> <title>Easy Tools</title> <style type = "text/css"> html {overflow: hidden; } body {
background-color: #EBEBEB; overflow:hidden; font-family: Arial, Helvetica, sans-serif; font-size: 12px; } body, td,
th {font-family: Arial, Helvetica, sans-serif ; font-size: 12px ; color: #000 ; } .FormButton {font-weight: bold ;
width: 100% ; font-family: Arial, Helvetica, sans-serif ; font-size: 12px ; } body { background-color: #EBEBEB; }
</style> </head> <body bgcolor = "#EBEBEB" text = "#000000"> <table width = "470" border = "0" cellpadding = "0">
<tr> <th align = "left" valign = "top" bgcolor = "#EBEBEB" id = "QuestionID"><strong>Message Here</strong></th>
<th align = "left" valign = "middle" bgcolor = "#EBEBEB"> </th> </tr> <tr>
<th width = "381" align = "right" valign = "middle" bgcolor = "#EBEBEB" id = "QuestionID">
<input name = "ReadFile" type = "text" id = "ReadFile" size = "60"></th>
<th width = "83" align = "center" valign = "middle" bgcolor = "#EBEBEB"> <span style="width: 15%">
<input id = "FilePicker" class = "FilePicker" name = "FilePicker" type = "button" value = "Path">
</span></th> </tr> <tr> <td colspan = "2" align = "center" valign = "middle" bgcolor = "#EBEBEB">
<table border = "0" width = "100%"> <tr align = "right"> <td style = "width: 20%"> </td>
<td style = "width: 20%"></td> <td style = "width: 25%"></td> <td style = "width: 15%">
<input id = "ButtonCancel" class = "FormButton" name = "ButtonCancel" type = "button" value = "Cancel"> </td>
<td style = "width: 15%"> <input id = "ButtonOK" class = "FormButton" name = "ButtonOK" type = "button" value = "OK">
</td> </tr> </table> </td> </tr> </table> </body> </html>]]
-- =============================================
local dialog = HTML_Dialog(true, myHtml, 505, 150, Header)
dialog:AddLabelField("QuestionID", Quest)
dialog:AddTextField("ReadFile", DefaltPath )
dialog:AddFilePicker(true, "FilePickerButton", "ReadFile", true)
if not dialog:ShowDialog() then
return ""
else
return dialog:GetTextField("ReadFile")
end -- if end
end -- function end
-- =====================================================]]
function InquiryPathBox(Header, Quest, DefaltPath)
--[[
Number Box for user input with default value
Caller: local X = InquiryPathBox("Select Path", "Where is the file location?", "C:\\")
Dialog Header = "Tool Name"
User Question = "Path name?"
Default Value = "C:\\"
Returns = String
]]
local myHtml = [[ <html> <head> <title>Easy Tools</title> <style type = "text/css"> html {overflow: hidden; } body {
background-color: #EBEBEB; overflow:hidden; font-family: Arial, Helvetica, sans-serif; font-size: 12px; } body, td,
th {font-family: Arial, Helvetica, sans-serif ; font-size: 12px ; color: #000 ; } .FormButton {font-weight: bold ;
width: 100% ; font-family: Arial, Helvetica, sans-serif ; font-size: 12px ; } body { background-color: #EBEBEB; }
</style> </head> <body bgcolor = "#EBEBEB" text = "#000000"> <table width = "470" border = "0" cellpadding = "0">
<tr> <th align = "left" valign = "top" bgcolor = "#EBEBEB" id = "QuestionID"><strong>Message Here</strong></th>
<th align = "left" valign = "middle" bgcolor = "#EBEBEB"> </th> </tr> <tr>
<th width = "381" align = "right" valign = "middle" bgcolor = "#EBEBEB" id = "QuestionID">
<input name = "DInput" type = "text" id = "DInput" size = "60"></th>
<th width = "83" align = "center" valign = "middle" bgcolor = "#EBEBEB"> <span style="width: 15%">
<input id = "DirectoryPicker" class = "DirectoryPicker" name = "DirectoryPicker" type = "button" value = "Path">
</span></th> </tr> <tr> <td colspan = "2" align = "center" valign = "middle" bgcolor = "#EBEBEB">
<table border = "0" width = "100%"> <tr align = "right"> <td style = "width: 20%"> </td>
<td style = "width: 20%"></td> <td style = "width: 25%"></td> <td style = "width: 15%">
<input id = "ButtonCancel" class = "FormButton" name = "ButtonCancel" type = "button" value = "Cancel"> </td>
<td style = "width: 15%"> <input id = "ButtonOK" class = "FormButton" name = "ButtonOK" type = "button" value = "OK">
</td> </tr> </table> </td> </tr> </table> </body> </html>]]
-- =============================================
local dialog = HTML_Dialog(true, myHtml, 505, 150, Header)
dialog:AddLabelField("QuestionID", Quest)
dialog:AddTextField("DInput", DefaltPath )
dialog:AddDirectoryPicker("DirectoryPicker", "DInput", true)
if not dialog:ShowDialog() then
return ""
else
return dialog:GetTextField("DInput")
end -- if end
end -- function end
-- =====================================================]]
function InquiryAreYouSureYesNo(Header, Question1, Question2)
--[[
Drop list for user to input project info
Caller = local y = InquiryAreYouSureYesNo("Pie Question", "Do you want free pie")
Dialog Header = "Pie Question"
User Question1 = "Do you want a Free Pie"
User Question2 = "You only get one"
Returns = true / false
]]
local myHtml = [[ <html><head><title>Yes or No Question</title>]] .. DialogWindow.Style ..[[</head><body><table><tr><td colspan="3" class="h2-lw" id="Question1">Question1</td></tr><tr><td colspan="3" class="h2-lw" id="Question2">Question2</td></tr><tr><td class="h2-l"> </td></tr><tr><td colspan="3" class="h2-l">Are you sure?</td></tr><tr><td class="h2-l"> </td></tr></table><table><tr><td colspan="3"><h2><span></span></h2></td></tr>
<tr><td class="h1-l"><input id="ButtonOK" class="FormButton FormBut" name="ButtonOK" type="button" value=" Yes "> </td> <td class="h1-r"> <input id="ButtonCancel" class="FormButton FormBut" name="ButtonCancel" type="button" value=" No "></td></tr></table></body></html>]]
-- =========================================================
local dialog = HTML_Dialog(true, myHtml, 440, 218, Header)
dialog:AddLabelField("Question1", Question1)
dialog:AddLabelField("Question2", Question2)
if not dialog:ShowDialog() then
return false
else
return true
end
end
-- =====================================================]]
function InquiryDoubleBox(Header, Quest, DefaltN)
--[[
-- nquiryNumberBox for user input with default number value
-- Caller: local x = InquiryNumberBox("Cabinet Maker", "Enter the cabinet height", 30.0)
-- Dialog Header: "Cabinet Maker"
-- User Question: "Enter the cabinet height"
-- Default value = 30.0
-- Returns = double
]]
local myHtml = [[<html><head><title>Get Double Value</title><style type="text/css">html{overflow:hidden}body{background-color:#ebebeb;overflow:hidden;font-family:Arial,Helvetica,sans-serif;font-size:12px;text:#000}.h1-l{font-family:Arial,Helvetica,sans-serif;font-size:12px;font-weight:700;text-align:left;white-space:nowrap}.h1-r{font-family:Arial,Helvetica,sans-serif;font-size:12px;font-weight:700;text-align:right;white-space:nowrap}.h1-c{font-family:Arial,Helvetica,sans-serif;font-size:12px;font-weight:700;text-align:center;white-space:nowrap}table{width:100%;border:0;cellpadding:0}.FilePicker{font-weight:700;font-family:Arial,Helvetica,sans-serif;font-size:12px;width:50px}.FormButton{font-weight:700;width:65px;font-family:Arial,Helvetica,sans-serif;font-size:12px}</style></head><body><table><tr><td id="QuestionID" class="h1-r"><strong>Message Here</strong></td><td><input type="text" id="NumberInput" size="5"></td></tr><tr><td colspan="2"></td></tr></table><table><tr class="h1-c"><td><input id="ButtonCancel" class="FormButton" name="ButtonCancel" type="button" value="Cancel"></td><td><input id="ButtonOK" class="FormButton" name="ButtonOK" type="button" value="OK"></td></tr></table></body></html>]]
local dialog = HTML_Dialog(true, myHtml, 260, 125, Header)
dialog:AddLabelField("QuestionID", Quest) ;
dialog:AddDoubleField("NumberInput", DefaltN) ;
if not dialog:ShowDialog() then
return -1
else
return dialog:GetDoubleField("NumberInput")
end
end -- function end
-- =====================================================]]
function InquiryIntegerBox(Header, Quest, DefaltI)
--[[
-- InquiryIntegerBox for user input with default number value
-- Caller: local x = InquiryIntegerBox("Cabinet Maker", "Enter the door count", 4)
-- Dialog Header: "Cabinet Maker"
-- User Question: "Enter the door count"
-- Default value = 4
-- Returns = integer
]]
local myHtml = [[<html><head><title>Get Integer</title><style type="text/css">html{overflow:auto}body{background-color:#ebebeb}table{width:100%;border:0}body,td,th{font-family:Arial,Helvetica,sans-serif;font-size:12px;color:#000}.FormButton{font-weight:700;width:85px;font-family:Arial,Helvetica,sans-serif;font-size:12px}body{background-color:#ebebeb;text:#000}</style></head><body><table><tr><td id="QuestionID"><strong>Message Here</strong></td><td><input type="text" id="IntegerInput" size="10"></td></tr><tr><td colspan="2"></td></tr></table><table><tr><td><input id="ButtonCancel" class="FormButton" name="ButtonCancel" type="button" value="Cancel"></td><td><input id="ButtonOK" class="FormButton" name="ButtonOK" type="button" value="OK"></td></tr></table></body></html>]]
local dialog = HTML_Dialog(true, myHtml, 505, 140, Header)
dialog:AddLabelField("QuestionID", Quest)
dialog:AddIntegerField("IntegerInput", DefaltI)
if not dialog:ShowDialog() then
return -1
else
return dialog:GetIntegerField("IntegerInput")
end
end -- function end
-- =====================================================]]
function InquiryTextgBox(Header, Quest, DefaltS)
--[[
-- InquiryStringBox for user input with default number value
-- Caller: local x = InquiryTextgBox("Cabinet Maker", "Enter the cabinet Name", "Jim")
-- Dialog Header: "Cabinet Maker"
-- User Question: "Enter the cabinet Name"
-- Default value = Jim
-- Returns = string
]]
local myHtml = [[<html><head><title>Get Number</title><style type="text/css">html{overflow:auto}body{background-color:#ebebeb}table{width:100%;border:0}body,td,th{font-family:Arial,Helvetica,sans-serif;font-size:12px;color:#000}.FormButton{font-weight:700;width:85px;font-family:Arial,Helvetica,sans-serif;font-size:12px}body{background-color:#ebebeb;text:#000}</style></head><body><table><tr><td id="QuestionID"><strong>Message Here</strong></td><td><input type="text" id="StringInput" size="10"></td></tr><tr><td colspan="2"></td></tr></table><table><tr><td><input id="ButtonCancel" class="FormButton" name="ButtonCancel" type="button" value="Cancel"></td><td><input id="ButtonOK" class="FormButton" name="ButtonOK" type="button" value="OK"></td></tr></table></body></html>]]
local dialog = HTML_Dialog(true, myHtml, 505, 140, Header)
dialog:AddLabelField("QuestionID", Quest)
dialog:AddTextField("StringInput", DefaltS)
if not dialog:ShowDialog() then
return -1
else
return dialog:GetTextField("NumberInput")
end
end -- function end
-- =====================================================]]
function OnLuaButton_InquiryError(Message)
--[[
Provides user information on an Error
Caller = local ItWorked = OnLuaButton_InquiryError("No number found")
Dialog Header = "Something Error"
User Message = "No Number etc..."
Returns = True
]]
local myHtml = [[<html><head><title>Error</title><style type = "text/css">.FormButton{font-weight:bold;width:75px;font-family:Arial,Helvetica,sans-serif;font-size:12px;white-space:nowrap}.Error{font-family:Arial,Helvetica,sans-serif;font-size:18px;font-weight:bold;color:#F00;text-align:left;white-space:nowrap;padding-right:4px;padding-left:10px;padding-top:4px;padding-bottom:4px}.ErrorMessage{font-family:Arial,Helvetica,sans-serif;font-size:12px;color:#000;font-weight:bold;text-align:left;white-space:nowrap;padding-right:4px;padding-left:10px;padding-top:4px;padding-bottom:4px}.ErrorTable{background-color:#FFF white-space:nowrap}html{overflow:hidden}</style></head><body text = "#000000"><table width="100%" border="0" cellpadding="0" class="ErrorTable"><tr><th align="center" nowrap="nowrap" class="Error">Error!</th></tr><tr><td id="ErrorMessage"><label class="ErrorMessage">-</label></tr><tr><td width="30%" align="right" style = "width: 15%"><input id = "ButtonOK" class = "FormButton" name = "ButtonOK" type = "button" value = "Exit"></td></tr></table></body></html>]]
local dialogWide = (#Message + 300)
local dialog = HTML_Dialog(true, myHtml, 250, dialogWide, "Gadget Error")
dialog:AddLabelField("ErrorMessage", Message)
dialog:ShowDialog()
Dovetail.InquiryErrorX = Dialog.WindowWidth
Dovetail.InquiryErrorY = Dialog.WindowHeight
WriteRegistry()
return true
end
-- =====================================================]]
function PresentMessage(Header, Type, Line)
--[[
Provides user information on an Error
Caller = local ItWorked = OnLuaButton_InquiryError("No number found")
Dialog Header = "Something Error"
User Message = "No Number etc..."
Returns = True
]]
local myHtml = [[<html><head><title>Error</title>]] .. DialogWindow.Style ..[[</head><body>
<table><tr><th valign="top" id="MessageType" class="Error">-</th><td id="MessageLine"><label class="ErrorMessage">-</label><td></tr>
<tr><td></td><td align="right"><input id = "ButtonOK" class = "FormButton" name = "ButtonOK" type = "button" value = "OK"></td></tr>
</table></body></html>]]
local dialog = HTML_Dialog(true, myHtml, 500, 150, Header)
dialog:AddLabelField("MessageType", Type .. ": ")
dialog:AddLabelField("MessageLine", Line)
dialog:ShowDialog()
return true
end
-- =====================================================]]
function OnLuaButton_InquiryAbout()
local myHtml = [[<html><head><title>About</title>]] .. DialogWindow.Style ..[[</head><body text = "#000000"><table width="680" border="0" cellpadding="0"> <tr> <td align="center" nowrap="nowrap" class="header1-c" id="SysName">Easy Cabinet Maker</td> </tr> <tr> <td align="center" nowrap="nowrap" id="Version" class="ver-c">Version</td> </tr> <tr> <td align="center" nowrap="nowrap"><hr></td> </tr> <tr> <td align="center" nowrap="nowrap" class="header2-c">Disclaimer</td> </tr> <tr> <td align="center" class="p1-l"><p class="p1-l">The ]] .. Dovetail.AppName .. [[ Gadget is a plugin for Vectric software, V-Carve Pro and Aspire.<br> Gadgets are an entirely optional add-in to Vectric's core software products.<br> They are provided 'as-is', without any express or implied warranty, and you make use of them entirely at your own risk.<br> In no event will the author(s) or Vectric Ltd. be held liable for any damages arising from their use.<br> <br> Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:<br> 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.<br> * If you use this software in a product, an acknowledgement in the product documentation would be appreciated but is not required.<br> 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.<br> 3. This notice may not be removed or altered from any source distribution.<br> <br>The author heavily utilized the SDK documentation and supplied code samples in addition to the outstanding user community on the Vectric User forum.</p></td> </tr> <tr> <td align="center"><a href="https://forum.vectric.com" class="webLink-c">Vectric User Forum</a></td> </tr> <tr> <td align="center"><span class="header2-c">JimAndi</span></td> </tr> <tr> <td align="center"><span class="h1-c">Houston, TX.</span></td> </tr> <tr> <td><hr></td> </tr> <tr> <td width="30%" align="center" style = "width: 15%"><input id = "ButtonOK" class = "FormButton" name = "ButtonOK" type = "button" value = "OK"></td> </tr></table></body></html>]]
local dialog = HTML_Dialog(true, myHtml, 720, 468, "About")
dialog:AddLabelField("SysName", Project.ProgramName)
dialog:AddLabelField("Version", "Version: " .. Project.ProgramVersion)
dialog:ShowDialog()
Project.AboutXY = tostring(dialog.WindowWidth) .. " x " .. tostring(dialog.WindowHeight)
return true
end
-- =====================================================]]
function Color_HTML ()
MessageBox(" X = " .. tostring(dialog.WindowWidth) ..
" Y = " .. tostring(dialog.WindowHeight)
)
-- =====================================================]]
--[[ -- begin HTML for Layer Color
<table>
<tr>
<td width="200" align="right" valign="middle" nowrap class="h1-rp">Layer Name</td>
<td width="300" align="right" valign="middle" nowrap class="h1-l" id="ValueTable">
<input name="Panel.PinHole" type="text" class="h1-l" id="Panel.PinHole" size="50" maxlength="50"/>
</td>
<td width="150"align="right" valign="middle" nowrap class="h1-l"><label for="Panel.LineColor01">Color</label>
<select name="Panel.LineColor01" id="Panel.LineColor01">
<option selected="selected">Black</option>
<option>Blue</option>
<option>Brown</option>
<option>Cyan</option>
<option>Gray</option>
<option>Green</option>
<option>Lime</option>
<option>Magenta</option>
<option>Maroon</option>
<option>Navy</option>
<option>Olive</option>
<option>Orange</option>
<option>Purple</option>
<option>Red</option>
<option>Silver</option>
<option>Teal</option>
<option>White</option>
<option>Yellow</option>
</select></td>
</tr>
</table>
<table width="101%" border="0" id="ButtonTable">
</table>
]] -- end HTML
end -- HTML Function end
-- =====================================================]]
function Style ()
-- =====================================================]]
DialogWindow.Style = [[ <style>
.DirectoryPicker {
font-weight: bold;
font-size: 12px;
white-space: nowrap;
background-color: #663300;
color: #FFFFFF;
}
.FormButton {
font-weight: bold;
width: 75px;
font-size: 12px;
white-space: nowrap;
background-color: #663300;
color: #FFFFFF;
}
.FormButton-Help {
font-weight: bold;
width: 75px;
font-size: 12px;
white-space: nowrap;
background-color: #663300;
color: #FFFFFF;
padding-left: 10;
padding-right: 10;
}
.LuaButton {
font-weight: bold;
font-size: 12px;
background-color: #663300;
color: #FFFFFF;
}
.ToolNameLabel {
font-weight: bolder;
font-size: 12px;
text-align: left;
color: #000;
width: 70%;
}
.ToolPicker {
font-weight: bold;
text-align: center;
font-size: 12px;
text-align: center;
width: 50px;
background-color: #663300;
color: #FFFFFF;
}
.alert-c {
font-size: 14px;
font-weight: bold;
text-align: center;
white-space: nowrap;
}
.alert-l {
font-size: 14px;
font-weight: bold;
text-shadow: 5px 5px 10px #FFF;
text-align: left;
width: 100%;
white-space: nowrap;
}
.alert-r {
font-size: 14px;
font-weight: bold;
text-align: right;
white-space: nowrap;
}
.error {
font-size: 18px;
font-weight: bold;
color: #FF0000;
text-align: left;
white-space: nowrap;
padding-right: 4px;
padding-left: 10px;
padding-top: 4px;
padding-bottom: 4px;
}
.errorMessage {
font-size: 12px;
color: #000;
font-weight: bold;
text-align: left;
white-space: nowrap;
padding-right: 4px;
padding-left: 10px;
padding-top: 4px;
padding-bottom: 4px;
}
.errorTable {
background-color: #FFFFFF;
white-space: nowrap;
}
.p1-l {
font-size: 12px;
text-align: left;
}
.h1-c {
font-size: 12px;
font-weight: bold;
text-align: center;
white-space: nowrap;
}
.h1-cOk {
font-size: 12px;
font-weight: bold;
text-align: center;
white-space: nowrap;
width: 15%;
}
.h1-l {
font-size: 12px;
font-weight: bold;
text-align: left;
white-space: nowrap;
}
.h1-r {
font-size: 12px;
font-weight: bold;
text-align: right;
white-space: nowrap;
}
.h1-rP {
font-size: 12px;
font-weight: bold;
text-align: right;
white-space: nowrap;
padding-right: 4px;
padding-left: 4px;
}
.h1-rPx {
font-size: 12px;
font-weight: bold;
text-align: right;
white-space: nowrap;
padding-right: 8px;
padding-left: 8px;
}
.h2-c {
font-size: 14px;
font-weight: bold;
text-align: center;
white-space: nowrap;
text-shadow: 2px 2px white;
}
.h2-l {
font-size: 14px;
font-weight: bold;
color: #663300;
text-align: left;
white-space: nowrap;
text-shadow: 2px 2px white;
}
.h2-r {
font-size: 14px;
font-weight: bold;
color: #663300;
text-align: right;
white-space: nowrap;
text-shadow: 2px 2px white;
}
.h3-bc {
font-size: 16px;
font-weight: bold;
text-align: center;
white-space: nowrap;
}
.h3-c {
font-size: 16px;
font-weight: bold;
text-align: center;
white-space: nowrap;
}
.h3-l {
font-size: 16px;
font-weight: bold;
text-align: left;
white-space: nowrap;
}
.h3-r {
font-size: 16px;
font-weight: bold;
text-align: right;
white-space: nowrap;
}
.h4-c {
font-size: 18px;
font-weight: bold;
text-align: center;
white-space: nowrap;
}
.h4-l {
font-size: 18px;
font-weight: bold;
text-align: left;
white-space: nowrap;
}
.h4-r {
font-size: 18px;
font-weight: bold;
text-align: right;
white-space: nowrap;
}
.help_But {
width: 45px;
}
.MyCenter{
text-align:center;
width:10;
}
.MyLeft{
text-align:left;
width:10;
}
.MyRight{
text-align:right;
width:10;
}
.helplabel-r {
cursor: pointer;
white-space: nowrap;
text-align: right;
}
.helplabel-rp {
cursor: pointer;
white-space: nowrap;
text-align: right;
padding-right: 8px;
}
.jsTag-no-vis {
font-size: 10px;
display: none;
text-align: center;
color: #00F;
visibility: hidden;
}
.jsbutton {
background-color: #663300;
border: 2px solid #999;
border-right-color: #000;
border-bottom-color: #000;
border-top-color: #FFF;
border-left-color: #FFF;
text-align: center;
text-decoration: none;
font-size: 12px;
margin: 1px 1px;
color: #FFFFFF;
}
.p1-c {
font-size: 12px;
text-align: center;
}
.p1-r {
font-size: 12px;
text-align: right;
}
.ver-c {
font-size: 10px;
font-weight: bold;
text-align: center;
white-space: nowrap;
color: #ffd9b3;
}
.webLink-c {
font-size: 16px;
font-weight: bold;
background-color: yellow;
text-align: center;
white-space: nowrap;
}
body {
background-color: #3a4660;
background-position: center;
overflow: hidden;
font-family: arial, helvetica, sans-serif;
font-size: 12px;
color: #FFFFFF;
background-image: url(]].. DialogWindow.myBackGround ..[[);
}
html {
overflow: hidden
}
table {
width: 100%;
border: 0;
}
</style>]]
end
-- =====================================================]]
function Orgin () -- Anchor Point
-- ================================
DialogWindow.Orgin = [[<table><tr><td colspan="2" class="h2-l">Anchor Point</td></tr><tr class="MyLeft"><td class="MyLeft"><table class="MyCenter"><tr><td><input type="radio" name="DrawingOrigin" checked="checked" value="V1"></td><td><hr></td><td valign="top"><input type="radio" name="DrawingOrigin" checked="checked" value="V2"></td></tr><tr><td class="auto-style9">|</td><td><input type="radio" name="DrawingOrigin" checked="checked" value="V3"></td><td valign="top">|</td></tr><tr><td><input type="radio" name="DrawingOrigin" checked="checked" value="V4"></td><td><hr></td><td valign="top"><input type="radio" name="DrawingOrigin" checked="checked" value="V5"></td></tr></table></td><td width="81%"><table><tr class="MyLeft"><td>X</td><td><input name="OriginX0" type="text" id="OriginX" size="8" maxlength="8"></td></tr><tr class="MyLeft"><td>Y</td><td><input name="OriginY0" type="text" id="OriginY" size="8" maxlength="8"></td></tr></table></td></tr></table>]]
end -- HTML Function end
-- =====================================================]]
function GetColor(str) -- returns the RGB value for the standard color names
-- str = "Purple"
-- returns = 128 0 128
local Colors = {}
Colors.Black = "0,0,0"; Colors.White = "255,255,255"; Colors.Red = "255,0,0"
Colors.Lime = "0,255,0"; Colors.Blue = "0,0,255"; Colors.Yellow = "255,255,0"
Colors.Cyan = "0,255,255"; Colors.Magenta = "255,0,255"; Colors.Silver = "192,192,192"
Colors.Gray = "128,128,128"; Colors.Maroon = "128,0,0"; Colors.Olive = "128,128,0"
Colors.Green = "0,128,0"; Colors.Purple = "128,0,128"; Colors.Teal = "0,128,128"
Colors.Navy = "0,0,128"
local Red, Green, Blue = 0
if "" == str then
DisplayMessageBox("Error: Empty string passed")
else
str = Colors[str]
if "string" == type(str) then
if string.find(str, ",") then
Red = tonumber(string.sub(str, 1, assert(string.find(str, ",") - 1)))
str = string.sub(str, assert(string.find(str, ",") + 1))
Green = tonumber(string.sub(str, 1, assert(string.find(str, ",") - 1)))
Blue = tonumber(string.sub(str, assert(string.find(str, ",") + 1)))
end
else
DisplayMessageBox("Error: Color Not Found")
Red = 0
Green = 0
Blue = 0
end
end
return Red, Green, Blue
end -- function end
-- =====================================================]]
function StatusMessage(Type, Header, Question, length) -- Standardize messaging dialogues
-- StatusMessage("Alert", "Alert Test", "This is a test of Alert", 165)
-- StatusMessage("Question", "Question Test", "This is a test of Question", 165)
-- StatusMessage("Tick", "Tick Test", "This is a test of Tick", 165)
-- StatusMessage("Minus", "Minus Test", "This is a test of Minus", 165)
-- StatusMessage("Error", "Error Test", "This is a test of Error", 165)
-- StatusMessage("Success", "Success Test", "This is a test of Success", 165)
-- StatusMessage("Blank", "Blank Test", "This is a test of Blank", 165)
local Image = ""
if Type == "Alert" then
Image = AlertImage()
elseif Type == "Question" then
Image = QuestionImage()
elseif Type == "Tick" then
Image = TickImage()
elseif Type == "Minus" then
Image = MinusImage()
elseif Type == "Error" then
Image = ErrorImage()
elseif Type == "Success" then
Image = SuccessImage()
else -- "Status"
Image = TickImage()
end -- if end
local help = [[<html><head><title>]] .. Header ..[[</title><style>
.FormButton {font-family: Arial, Helvetica, sans-serif;font-weight: bold;font-size: 12px;white-space: nowrap;background-color: #663300;color: #FFFFFF;width: 75px;
}table {width: 100%;border: 0;}.h2-lm {font-family: Arial, Helvetica, sans-serif;font-size: 14px;font-weight: bold;text-align: left;}.h2-r {font-family: Arial, Helvetica, sans-serif;font-size: 14px;font-weight: bold;text-align: right;white-space: nowrap;}.h2-l {font-family: Arial, Helvetica, sans-serif;font-size: 14px;font-weight: bold;text-align: left;white-space: nowrap;}body {background-color: #3a4660;background-position: center;overflow: hidden;font-family: arial, helvetica, sans-serif;font-size: 12px;color: #FFFFFF;background-image: url(]] .. myBackGround() .. [[);}html {overflow: hidden}</style></head><body><table> <tr> <td class="h2-l"><]] .. Image .. [[" width="60" height="60"></td>
<td class="h2-lm" id="Question">]] .. Question .. [[</td></tr><tr><td colspan=2><h2><span></span></h2></td>
</tr></table><table><tr><td class="h2-r"><input id="ButtonOK" class="FormButton" name="ButtonOK" type="button" value="OK"></td>
</tr></table></body></html>]]
local dialog = HTML_Dialog(true, help , 550, length, Header)
dialog:ShowDialog()
return true
end
-- =====================================================]]
end -- Dialog Tools function end
Directory and File Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╦╦═╗╔═╗╔═╗╔╦╗╔═╗╦═╗╦ ╦ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║║╠╦╝║╣ ║ ║ ║ ║╠╦╝╚╦╝ ║ ║ ║║ ║║ ╚═╗
═╩╝╩╩╚═╚═╝╚═╝ ╩ ╚═╝╩╚═ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function DirectoryTools()
-- =====================================================]]
function MakeFolder(xPath)
os.execute( "mkdir " .. xPath)
return true
end -- function end
-- =====================================================]]
function PathFix(xPath)
return string.gsub(xPath, "\\", "/")
end -- function end
-- =====================================================]]
function FileExists(name)
-- FileExists(name
-- DisplayMessageBox(name)
local f=io.open(name,"r")
if f~=nil then
io.close(f)
return true
else
return false
end
end -- function end
-- =====================================================]]
function DirectoryProcessor(job, dir_name, filter, do_sub_dirs, function_ptr)
local num_files_processed = 0
local directory_reader = DirectoryReader()
local cur_dir_reader = DirectoryReader()
directory_reader:BuildDirectoryList(dir_name, do_sub_dirs)
directory_reader:SortDirs()
local number_of_directories = directory_reader:NumberOfDirs()
for i = 1, number_of_directories do
local cur_directory = directory_reader:DirAtIndex(i)
-- get contents of current directory
-- dont include sub dirs, use passed filter
cur_dir_reader:BuildDirectoryList(cur_directory.Name, false)
cur_dir_reader:GetFiles(filter, true, false)
-- call passed method for each file:
local num_files_in_dir = cur_dir_reader:NumberOfFiles()
for j=1, num_files_in_dir do
local file_info = cur_dir_reader:FileAtIndex(j)
if not function_ptr(job, file_info.Name) then
return true
end -- if end
num_files_processed = num_files_processed + 1
end -- for end
-- empty out our directory object ready for next go
cur_dir_reader:ClearDirs()
cur_dir_reader:ClearFiles()
end -- for end
return num_files_processed
end -- function end
-- =====================================================]]
end -- Directory Tools end
Drawing Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╦═╗╔═╗╦ ╦╦╔╗╔╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║╠╦╝╠═╣║║║║║║║║ ╦ ║ ║ ║║ ║║ ╚═╗
═╩╝╩╚═╩ ╩╚╩╝╩╝╚╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function DrawTools()
-- =====================================================]]
function LayerClear(LayerName)
local Mylayer = Milling.job.LayerManager:GetLayerWithName(LayerName)
if Mylayer.IsEmpty then
Milling.job.LayerManager:RemoveLayer(Mylayer)
end -- if end
return true
end -- function end
-- ====================================================]]
function Scale(Num)
local mtl_block = MaterialBlock()
if mtl_block.InMM then
return Num * 25.4
else
return Num
end
end -- end function
-- =====================================================]]
function AssyHoler(pt1, pt2, PartName) -- Draws Assy Holes in a stight line
local Ang1 = GetPolarDirection(pt1, pt2)
local Ang2 = GetPolarDirection(pt2, pt1)
pt1 = Polar2D(pt1, Ang1, Milling.AssemblyHoleStartEnd)
DrawCircle(pt1, Milling.AssemblyHoleRad, Milling.LNAssemblyHole .. PartName)
pt2 = Polar2D(pt2, Ang2, Milling.AssemblyHoleStartEnd)
DrawCircle(pt2, Milling.AssemblyHoleRad, Milling.LNAssemblyHole .. PartName)
local Dist = GetDistance(pt1, pt2)
if Project.Debugger then
DMark("pt1", pt1)
DMark("pt2", pt2)
end
BaseScrew(2)
Milling.AssemblyHoleSpace = ((Milling.AssemblyHoleMaxSpace + Milling.AssemblyHoleMinSpace) * 0.5)
HoleCount = Round(math.floor(Dist / Milling.AssemblyHoleSpace))
HoleSpacing = (Dist / HoleCount)
HoleCount = (Dist / HoleSpacing)
if (Dist > (HoleSpacing * 2.0)) then
for i = HoleCount, 1, -1 do
pt1 = Polar2D(pt1, Ang1, HoleSpacing)
DrawCircle(pt1, Milling.AssemblyHoleRad, Milling.LNAssemblyHole .. PartName)
if Project.Debugger then
DMark("pt1w", pt1)
end
BaseScrew(1)
end -- for end
elseif (Dist > HoleSpacing) then
ptC = Polar2D(pt1, Ang1, Dist / 2.0)
if Project.Debugger then
DMark("ptC", ptC)
end
DrawCircle(ptC, Milling.AssemblyHoleRad, Milling.LNAssemblyHole .. PartName)
else
-- Done No Holes
end
return true
end -- end AssyHoler function
-- =====================================================]]
function DrawBoneCenter2Pts(pt1, pt2, SlotWidth, BitRadius)
Local Project = {}
Project.job = VectricJob()
Project.ang = GetPolarDirection(pt1, pt2)
Project.dis = H(SlotWidth)
Project.bit = math.sin(math.rad(45.0)) * BitRadius
Project.ptA = Polar2D(pt1, Project.ang + 90.0, Project.dis)
Project.ptAa = Polar2D(Project.ptA, Project.ang, Project.bit)
Project.ptAb = Polar2D(Project.ptA, Project.ang + 270.0, Project.bit)
Project.ptB = Polar2D(pt1, Project.ang + 270.0, Project.dis)
Project.ptBa = Polar2D(Project.ptB, Project.ang + 90.0, Project.bit)
Project.ptBb = Polar2D(Project.ptB, Project.ang, Project.bit)
Project.ptC = Polar2D(pt2, Project.ang + 270.0, Project.dis)
Project.ptCa = Polar2D(Project.ptC, Project.ang + 90.0, Project.bit)
Project.ptCb = Polar2D(Project.ptC, Project.ang - 180.0, Project.bit)
Project.ptD = Polar2D(pt2, Project.ang + 90.0, Project.dis)
Project.ptDa = Polar2D(Project.ptD, Project.ang - 180.0, Project.bit)
Project.ptDb = Polar2D(Project.ptD, Project.ang + 270.0, Project.bit)
Project.line = Contour(0.0)
Project.layer = Project.job.LayerManager:GetLayerWithName("DogBone")
Project.line:AppendPoint(Project.ptAa)
Project.line:ArcTo(Project.ptAb, 1.0)
Project.line:LineTo(Project.ptBa)
Project.line:ArcTo(Project.ptBb, 1.0)
Project.line:LineTo(Project.ptCb)
Project.line:ArcTo(Project.ptCa, 1.0)
Project.line:LineTo(Project.ptDb)
Project.line:ArcTo(Project.ptDa, 1.0)
Project.line:LineTo(Project.ptAa)
Project.layer:AddObject(CreateCadContour(Project.line), true)
return true
end -- function end
-- =====================================================]]
function InsideCornerNipper(AngPlung, BitRadius, CornerPt)
local NipLength = math.sin(math.rad(45.0)) * ((BitRadius + 0.04) * 2.0)
local Pt1, Pt2 = Point2D()
if Material.Orientation == "V" then
Pt1 = Polar2D(CornerPt, (AngPlung + 90.0) - 45.0, NipLength)
Pt2 = Polar2D(CornerPt, (AngPlung + 90.0) + 45.0, NipLength)
else
Pt1 = Polar2D(CornerPt, (AngPlung + 180.0) - 45.0, NipLength)
Pt2 = Polar2D(CornerPt, (AngPlung + 180.0) + 45.0, NipLength)
end
return Pt1, Pt2
end
-- =====================================================]]
function AddGroupToJob(job, group, layer_name)
--[[ --------------- AddGroupToJob --------------------------------------------------|
| Add passed group to the job - returns object created
| Parameters:
| job -- job we are working with
| group -- group of contours to add to document
| layer_name -- name of layer group will be created on|
| Return Values:
| object created to represent group in document
]]
-- create a CadObject to represent the group
local cad_object = CreateCadGroup(group);
-- create a layer with passed name if it doesnt already exist
local layer = job.LayerManager:GetLayerWithName(layer_name)
-- and add our object to it
layer:AddObject(cad_object, true)
return cad_object
end
-- =====================================================]]
function DrawArc(PtS, PtE, ArcRadius, Layer)
--[[Draw Arc
function main(script_path)
local MyPt1 = Point2D(3.5,3.8)
local MyPt2 = Point2D(3.5,6.8)
local layer = "My Arc"
DrawArc(MyPt1, MyPt2, -0.456, Layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(Layer)
line:AppendPoint(PtS)
line:ArcTo(PtE,1);
layer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- =====================================================]]
function DrawEllipse(CenterPt, LongAxe, ShortAxe, Layer)
local LongAngle = 90.0
local ValueAB = (LongAxe - ShortAxe) * 0.50
local ValueAC = ValueAB * math.cos(math.rad(LongAngle))
local job = VectricJob()
local LRad = LongAxe * 0.50
local ptT = Polar2D(CenterPt, LongAngle, LRad)
local X = 0.0
local pty = Point2D(0.0,0.0)
local ptx = Point2D(0.0,0.0)
local mylayer = job.LayerManager:GetLayerWithName(Layer)
local line = Contour(0.0)
line:AppendPoint(ptT)
while (X < 360.0) do
pty = Polar2D(CenterPt, LongAngle + X, LRad)
ValueAC = ValueAB * math.cos(math.rad(LongAngle + X))
if ((LongAngle + X) >= 90.0) then
ptx = Polar2D(pty, 180.0, ValueAC)
else
ptx = Polar2D(pty, 0.0, ValueAC)
end
line:LineTo(ptx)
X = X + 1
end -- while end
line:LineTo(ptT)
mylayer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- =====================================================]]
function DrawEllipse1(DrawEllipse_CenterPt, DrawEllipse_LongAxe, DrawEllipse_ShortAxe, DrawEllipse_LongAxeAngle, DrawEllipse_Layer)
-- ---------------------------------------------------]]
function H(x) -- Returns half the value
return x * 0.5
end -- function end
-- ---------------------------------------------------]]
function Polar2D(pt, ang, dis) -- Calculate a new point based on reference point, angle and distance.
-- Returns a 2Dpoint(x, y)
return Point2D((pt.X + dis * math.cos(math.rad(ang))), (pt.Y + dis * math.sin(math.rad(ang))))
end -- End Function
-- ---------------------------------------------------]]
function GetDistance(objA, objB)
local xDist = objB.x - objA.x
local yDist = objB.y - objA.y
return math.sqrt((xDist ^ 2) + (yDist ^ 2))
end -- function end
-- ---------------------------------------------------]]
function Radius2Bulge (p1, p2, Rad)
local chord = math.sqrt(((p2.x - p1.x) ^ 2) + ((p2.y - p1.y) ^ 2))
local seg = (Rad - (0.5 * (math.sqrt((4.0 * Rad^2) - chord^2))))
local bulge = (2 * seg) / chord
return bulge
end -- function end
-- ---------------------------------------------------]]
function GetPolarAngle(Start, Corner, End)
local function GetPolarDirection(point1, point2) --
local ang = math.abs(math.deg(math.atan((point2.Y - point1.Y) / (point2.X - point1.X))))
if point1.X < point2.X then
if point1.Y < point2.Y then
ang = ang + 0.0
else
ang = 360.0 - ang
end -- if end
else
if point1.Y < point2.Y then
ang = 180.0 - ang
else
ang = ang + 180.0
end -- if end
end -- if end
if ang >=360 then
ang = ang -360.0
end -- if end
return ang
end -- function end
return math.abs(GetPolarDirection(Corner, Start) - GetPolarDirection(Corner, End))
end -- function end
-- ---------------------------------------------------]]
-- Call = DrawEllipse(2DPoint(20.0, 20.0), 20.0, 10.0, 0.0, "Jim")
local job = VectricJob()
local EndRadius = 0.0
local TopRadius = 0.0
local ptT = Polar2D(DrawEllipse_CenterPt, (90.0 + DrawEllipse_LongAxeAngle), H(DrawEllipse_ShortAxe))
local ptB = Polar2D(DrawEllipse_CenterPt, (270.0 + DrawEllipse_LongAxeAngle), H(DrawEllipse_ShortAxe))
local ptR = Polar2D(DrawEllipse_CenterPt, (0.0 + DrawEllipse_LongAxeAngle), H(DrawEllipse_LongAxe))
local ptL = Polar2D(DrawEllipse_CenterPt, (180.0 + DrawEllipse_LongAxeAngle), H(DrawEllipse_LongAxe))
local ptC = DrawEllipse_CenterPt
--[[
DMark("ptC", ptC)
DMark("ptT", ptT)
DMark("ptB", ptB)
DMark("ptL", ptL)
DMark("ptR", ptR)
]]
local C_Offset = H(DrawEllipse_LongAxe - DrawEllipse_ShortAxe)
local LT_SlopeDist = H(GetDistance(ptL, ptT) - H(DrawEllipse_LongAxe - DrawEllipse_ShortAxe))
local LT_Dist = GetDistance(ptL, ptT)
local LT_Angle = math.abs(90.0 - GetAngle(ptT, ptL, ptC))
local pt_a = Polar2D(ptL, LT_Angle + DrawEllipse_LongAxeAngle, LT_SlopeDist)
local aT_Dist = GetDistance(pt_a, ptT)
local aC_Dist = aT_Dist / (math.tan(math.rad(LT_Angle)))
local Tc_Dist = math.sqrt(aT_Dist^2 + aC_Dist^2)
local pt_c = Polar2D(ptT, (270.0 + DrawEllipse_LongAxeAngle), Tc_Dist)
local cC_Dist = GetDistance(pt_c, ptC)
local b_Dist = math.tan(math.rad(LT_Angle)) * cC_Dist
local pt_b = Polar2D(ptC, (180.0 + DrawEllipse_LongAxeAngle), b_Dist)
local pt_d = Polar2D(ptB, (90.0 + DrawEllipse_LongAxeAngle), Tc_Dist)
local pt_e = Polar2D(ptC, (0.0 + DrawEllipse_LongAxeAngle), b_Dist)
local pt1 = Polar2D(pt_d, (270.0 + DrawEllipse_LongAxeAngle) - LT_Angle, Tc_Dist)
local pt2 = Polar2D(pt_d, (270.0 + DrawEllipse_LongAxeAngle) + LT_Angle, Tc_Dist)
local pt3 = Polar2D(pt_c, (90.0 + DrawEllipse_LongAxeAngle) - LT_Angle, Tc_Dist)
local pt4 = Polar2D(pt_c, (90.0 + DrawEllipse_LongAxeAngle) + LT_Angle, Tc_Dist)
--[[
DMark("pt1", pt1)
DMark("pt2", pt2)
DMark("pt3", pt3)
DMark("pt4", pt4)
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(DrawEllipse_Layer)
line:AppendPoint(pt1)
line:LineTo(pt2)
line:LineTo(pt3)
line:LineTo(pt4)
line:LineTo(pt1)
layer:AddObject(CreateCadContour(line), true)
]]
local T_Sec = GetDistance(ptC, ptT) - H(GetDistance(pt1, pt4))
local R_Sec = GetDistance(ptC, ptR) - H(GetDistance(pt1, pt2))
local T_Chor = GetDistance(pt1, pt2)
local R_Chor = GetDistance(pt1, pt4)
local T_Bulge = Radius2Bulge (pt1, pt2, Tc_Dist)
local L_Bulge = Radius2Bulge (pt1, pt4, GetDistance(ptL, pt_b))
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(DrawEllipse_Layer)
line:AppendPoint(pt1)
line:ArcTo(pt2, T_Bulge)
line:ArcTo(pt3, L_Bulge)
line:ArcTo(pt4, T_Bulge)
line:ArcTo(pt1, L_Bulge)
layer:AddObject(CreateCadContour(line), true)
job:Refresh2DView()
return true
end -- Draw Ellipse function end
-- =====================================================]]
function DrawBox(p1, p2, p3, p4, Layer)
--[[ Draw Box
function main(script_path)
local MyPt1 = Point2D(1.0,1.0)
local MyPt2 = Point2D(1.0,3.0)
local MyPt3 = Point2D(3.0,1.0)
local MyPt4 = Point2D(3.0,3.0)
local layer = "My Box"
DrawBox(MyPt1 ,MyPt2, MyPt3, MyPt4, Layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end -- if end
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(Layer)
line:AppendPoint(p1)
line:LineTo(p2)
line:LineTo(p3)
line:LineTo(p4)
line:LineTo(p1)
layer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- =====================================================]]
function DrawCircle(Pt1, CenterRadius, Layer)
--[[ ==Draw Circle==
function main(script_path)
local MyPt1 = Point2D(1.0,1.0)
local MyRad = 3.0
local layer = "My Box"
DrawCircle(MyPt1, MyRad, Layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end -- if end
local pa = Polar2D(Pt1, 180.0, CenterRadius)
local pb = Polar2D(Pt1, 0.0, CenterRadius)
local Contour = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(Layer)
Contour:AppendPoint(pa)
Contour:ArcTo(pb, 1)
Contour:ArcTo(pa, 1)
layer:AddObject(CreateCadContour(Contour), true)
return true
end -- function end
-- =====================================================]]
function DrawLine(Pt1, Pt2, Layer)
--[[Draws a line from Pt1 to Pt2 on the layer name.
function main(script_path)
local MyPt1 = Point2D(3.5,3.8)
local MyPt2 = Point2D(3.5,6.8)
local layer = "My Line"
DrawLine(MyPt1 , MyPt2, MyPt3, Layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(Layer)
line:AppendPoint(Pt1)
line:LineTo(Pt2)
layer:AddObject(CreateCadContour(line), true)
return true
end -- function end
-- =====================================================]]
function DrawStar(pt1, InRadius ,OutRadius, layer) --This draw function requires the center point, inter star radius, outer star radius and layer name.
--[[
function main(script_path)
local MyPt = Point2D(3.5,3.8)
local InRadius = 9.0
local OutRadius= 20.0
local layer = "My Star"
DrawStar(MyPt , InRadius ,OutRadius, layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
local p1 = Polar2D(pt1, 18.0, OutRadius)
local p2 = Polar2D(pt1, 54.0, InRadius)
local p3 = Polar2D(pt1, 90.0, OutRadius)
local p4 = Polar2D(pt1, 126.0, InRadius)
local p5 = Polar2D(pt1, 162.0, OutRadius)
local p6 = Polar2D(pt1, 198.0, InRadius)
local p7 = Polar2D(pt1, 234.0, OutRadius)
local p8 = Polar2D(pt1, 270.0, InRadius)
local p9 = Polar2D(pt1, 306.0, OutRadius)
local p0 = Polar2D(pt1, 342.0, InRadius)
local line = Contour(0.0)
-- local layers = job.LayerManager:GetLayerWithName(layer)
line:AppendPoint(p1);
line:LineTo(p2); line:LineTo(p3)
line:LineTo(p4); line:LineTo(p5)
line:LineTo(p6); line:LineTo(p7)
line:LineTo(p8); line:LineTo(p9)
line:LineTo(p0); line:LineTo(p1)
layer:AddObject(CreateCadContour(line), true)
job:Refresh2DView()
return true
end -- function end
-- =====================================================]]
function DrawTriangle(p1, p2, p3, Layer)
--[[Draw Triangle
function main(script_path)
local MyPt1 = Point2D(3.5,3.8)
local MyPt2 = Point2D(3.5,6.8)
local MyPt3 = Point2D(9.8,6.8)
local layer = "My Triangle"
DrawTriangle(MyPt1 , MyPt2, MyPt3, Layer)
return true
end -- function end
-- -----------------------------------------------------]]
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
local line = Contour(0.0)
local layer = job.LayerManager:GetLayerWithName(Layer)
line:AppendPoint(p1)
line:LineTo(p2)
line:LineTo(p3)
line:LineTo(p1)
layer:AddObject(CreateCadContour(line), true)
job:Refresh2DView()
return true
end -- function end
-- =====================================================]]
function Radius2Bulge (p1, p2, Rad)
local chord = math.sqrt(((p2.x - p1.x) ^ 2) + ((p2.y - p1.y) ^ 2))
local seg = (Rad - (0.5 * (math.sqrt((4.0 * Rad^2) - chord^2))))
local bulge = (2 * seg) / chord
return bulge
end
-- =====================================================]]
function ChordSeg2Radius (Chr, Seg)
local rad = (((Chr * Chr)/(Seg * 4)) + Seg) / 2.0
return rad
end -- end Function
-- ====================================================]]
function CreateJob(job_name, width, height, thickness, in_mm, job_origin, z_on_surface)
--[[ ----------- CreateJob -------------------------------------------------
| This function was provided "as is" by Vectric technical team and a part of the gadget API documentation.
| Create a new empty job with the passed settings
]]
-- we fill in most of our bounds in a Box2D
local job_bounds = Box2D()
local blc = Point2D(0, 0)
local trc = Point2D(width, height)
local origin_offset = Vector2D(0,0)
-- calculate bottom left corner offset for chosen origin
if Template.DXFOrientation == "Vertical" then
trc = Point2D(height, width)
if (job_origin == "BLC") then
origin_offset:Set(0, 0)
elseif (job_origin == "BRC") then
origin_offset:Set(height, 0)
elseif (job_origin == "TRC") then
origin_offset:Set(height, width)
elseif (job_origin == "TLC") then
origin_offset:Set(0, width)
elseif (job_origin == "CENTRE") then
origin_offset:Set(height / 2, width / 2)
elseif (job_origin == "CENTER") then
origin_offset:Set(height / 2, width / 2)
else
MessageBox("Unknown XY origin specified " .. job_origin)
end
else
if (job_origin == "BLC") then
origin_offset:Set(0, 0)
elseif (job_origin == "BRC") then
origin_offset:Set(width, 0)
elseif (job_origin == "TRC") then
origin_offset:Set(width, height)
elseif (job_origin == "TLC") then
origin_offset:Set(0, height)
elseif (job_origin == "CENTRE") then
origin_offset:Set(width / 2, height / 2)
elseif (job_origin == "CENTER") then
origin_offset:Set(width / 2, height / 2)
else
MessageBox("Unknown XY origin specified " .. job_origin)
end
end
-- subtract the origin offset vector from our 'standard' corner positions to get position for corners for requested origin
blc = blc - origin_offset
trc = trc - origin_offset
job_bounds:Merge(blc)
job_bounds:Merge(trc)
local success = CreateNewJob(job_name,job_bounds,thickness,in_mm,z_on_surface)
return success
end
-- =====================================================]]
function DrawFontGrid(job)
local pt = Point2D(0.3,0.3)
local scl = 1.0 -- (scl * 0.5)
local pA0 = pt
local ang = 0.0
local pA1 = Polar2D(pt, ang + 90.0000, (0.2500 * scl))
local pA2 = Polar2D(pt, ang + 90.0000, (0.5000 * scl))
local pA3 = Polar2D(pt, ang + 90.0000, (0.7500 * scl))
local pA4 = Polar2D(pt, ang + 90.0000, (1.0000 * scl))
local pA5 = Polar2D(pt, ang + 90.0000, (1.2500 * scl))
local pA6 = Polar2D(pt, ang + 90.0000, (1.5000 * scl))
local pA7 = Polar2D(pt, ang + 90.0000, (1.7500 * scl))
local pA8 = Polar2D(pt, ang + 90.0000, (2.0000 * scl))
local pA9 = Polar2D(pt, ang + 90.0000, (2.2500 * scl))
local pA10 = Polar2D(pt, ang + 90.0000, (2.5000 * scl))
PointCircle(pA0)
PointCircle(pA1)
PointCircle(pA2)
PointCircle(pA3)
PointCircle(pA4)
PointCircle(pA5)
PointCircle(pA6)
PointCircle(pA7)
PointCircle(pA8)
PointCircle(pA9)
PointCircle(pA10)
local pB0 = Polar2D(pt, ang + 0.0000, (0.2500 * scl))
local pB1 = Polar2D(pt, ang + 45.0000, (0.3536 * scl))
local pB2 = Polar2D(pt, ang + 63.4352, (0.5590 * scl))
local pB3 = Polar2D(pt, ang + 71.5651, (0.7906 * scl))
local pB4 = Polar2D(pt, ang + 75.9638, (1.0308 * scl))
local pB5 = Polar2D(pt, ang + 78.6901, (1.2748 * scl))
local pB6 = Polar2D(pt, ang + 80.5376, (1.5207 * scl))
local pB7 = Polar2D(pt, ang + 81.8699, (1.7678 * scl))
local pB8 = Polar2D(pt, ang + 82.8750, (2.0156 * scl))
local pB10 = Polar2D(pt, ang + 84.2894, (2.5125 * scl))
PointCircle(pB0)
PointCircle(pB1)
PointCircle(pB2)
PointCircle(pB3)
PointCircle(pB4)
PointCircle(pB5)
PointCircle(pB7)
PointCircle(pB8)
PointCircle(pB10)
local pC0 = Polar2D(pt, ang + 0.0000, (0.5000 * scl))
local pC1 = Polar2D(pt, ang + 26.5650, (0.5590 * scl))
local pC2 = Polar2D(pt, ang + 45.0000, (0.7071 * scl))
local pC3 = Polar2D(pt, ang + 56.3099, (0.9014 * scl))
local pC4 = Polar2D(pt, ang + 63.4342, (1.1180 * scl))
local pC5 = Polar2D(pt, ang + 68.1993, (1.3463 * scl))
local pC6 = Polar2D(pt, ang + 71.5650, (1.5811 * scl))
local pC7 = Polar2D(pt, ang + 63.4342, (1.1180 * scl))
local pC8 = Polar2D(pt, ang + 74.0550, (1.8201 * scl))
local pC10 = Polar2D(pt, ang + 78.6899, (2.5495 * scl))
PointCircle(pC0)
PointCircle(pC1)
PointCircle(pC2)
PointCircle(pC3)
PointCircle(pC4)
PointCircle(pC6)
PointCircle(pC8)
PointCircle(pC10)
local pD0 = Polar2D(pt, ang + 0.0000, (0.6250 * scl))
local pD1 = Polar2D(pt, ang + 21.8014, (0.6731 * scl))
local pD2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl))
local pD4 = Polar2D(pt, ang + 57.9946, (1.1792 * scl))
local pD7 = Polar2D(pt, ang + 70.3462, (1.8583 * scl))
local pD8 = Polar2D(pt, ang + 72.6460, (2.0954 * scl))
PointCircle(pD0)
PointCircle(pD1)
PointCircle(pD2)
PointCircle(pD4)
PointCircle(pD7)
PointCircle(pD8)
local pE0 = Polar2D(pt, ang + 0.0000, (0.7500 * scl))
local pE1 = Polar2D(pt, ang + 18.4346, (0.7906 * scl))
local pE2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl))
local pE3 = Polar2D(pt, ang + 45.0000, (1.0607 * scl))
local pE5 = Polar2D(pt, ang + 59.0371, (1.4578 * scl))
local pE6 = Polar2D(pt, ang + 63.4349, (1.6771 * scl))
local pE7 = Polar2D(pt, ang + 66.4349, (1.9039 * scl))
local pE8 = Polar2D(pt, ang + 69.4440, (2.1360 * scl))
PointCircle(pE0)
PointCircle(pE1)
PointCircle(pE2)
PointCircle(pE3)
PointCircle(pE5)
PointCircle(pE6)
PointCircle(pE7)
PointCircle(pE8)
local pF0 = Polar2D(pt, ang + 0.0000, (1.0000 * scl))
local pF1 = Polar2D(pt, ang + 14.0360, (1.0308 * scl))
local pF2 = Polar2D(pt, ang + 26.5651, (1.1180 * scl))
local pF3 = Polar2D(pt, ang + 36.8699, (1.2500 * scl))
local pF4 = Polar2D(pt, ang + 45.0000, (1.4142 * scl))
local pF5 = Polar2D(pt, ang + 51.3425, (1.6006 * scl))
local pF6 = Polar2D(pt, ang + 56.3099, (1.8025 * scl))
local pF7 = Polar2D(pt, ang + 60.2551, (2.0156 * scl))
local pF8 = Polar2D(pt, ang + 63.4349, (2.2361 * scl))
PointCircle(pF0)
PointCircle(pF1)
PointCircle(pF2)
PointCircle(pF3)
PointCircle(pF4)
PointCircle(pF5)
PointCircle(pF6)
PointCircle(pF7)
PointCircle(pF8)
local pG0 = Polar2D(pt, ang + 0.0000, (1.2500 * scl))
local pG1 = Polar2D(pt, ang + 11.3099, (1.2748 * scl))
local pG2 = Polar2D(pt, ang + 21.8014, (1.3463 * scl))
local pG3 = Polar2D(pt, ang + 30.9638, (1.4577 * scl))
local pG4 = Polar2D(pt, ang + 38.6598, (1.6008 * scl))
local pG5 = Polar2D(pt, ang + 45.0000, (1.7678 * scl))
local pG6 = Polar2D(pt, ang + 50.1944, (1.9526 * scl))
local pG7 = Polar2D(pt, ang + 54.4623, (2.1506 * scl))
local pG8 = Polar2D(pt, ang + 57.9946, (2.3585 * scl))
local pG10 = Polar2D(pt,59.0362, (2.9155 * scl))
PointCircle(pG0)
PointCircle(pG1)
PointCircle(pG2)
PointCircle(pG3)
PointCircle(pG4)
PointCircle(pG5)
PointCircle(pG6)
PointCircle(pG7)
PointCircle(pG8)
PointCircle(pG10)
local pH0 = Polar2D(pt, ang + 0.0000, (1.5000 * scl))
local pH10 = Polar2D(pt, 63.4349, (2.7951 * scl))
PointCircle(pH0)
PointCircle(pH10)
job:Refresh2DView()
return true
end
-- =====================================================]]
function DrawWriterOld(what, where, size, lay, ang)
local group
--[[ How to use:
| local TextMessage = "Your Text Here"
| local TextPt = Point2D(3.5,3.8)
| local TextHight = 0.5
| local TextLayer = "Jim Anderson"
| local TextAng = 20.0
| DrawWriter(TextMessage ,local TextPt , TextHight , TextLayer,TextAng )
| -- ==Draw Writer==
| -- Utilizing a provided string of text, the program walks the string and reproduces each letter (parametrically) on the drawing using vectors.
function main()
-- create a layer with passed name if it doesn't already exist
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("No job loaded")
return false;
end
local TextMessage = "A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 ! @ # $ % & * ( ) { } [ ] ? , . : ; '' ' _ - + = ~ ^ < > |"
local TextPt = Point2D(0.1, 2.0)
local TextHight = 0.25
local TextLayer = "Gadget Text"
local TextAng = 10.0
DrawWriter(TextMessage, TextPt, TextHight, TextLayer, TextAng)
job:Refresh2DView()
return true
end
-- -----------------------------------------------------]]
-- ==============================================================================
local function Polar2D(pt, ang, dis)
return Point2D((pt.X + dis * math.cos(math.rad(ang))), (pt.Y + dis * math.sin(math.rad(ang))))
end
-- ==============================================================================
local function MonoFont(job, pt, letter, scl, lay, ang)
scl = (scl * 0.5) ;
local pA0 = pt ;
local pA1 = Polar2D(pt, ang + 90.0000, (0.2500 * scl)) ; local pA2 = Polar2D(pt, ang + 90.0000, (0.5000 * scl)) ;
local pA3 = Polar2D(pt, ang + 90.0000, (0.7500 * scl)) ; local pA4 = Polar2D(pt, ang + 90.0000, (1.0000 * scl)) ;
local pA5 = Polar2D(pt, ang + 90.0000, (1.2500 * scl)) ; local pA6 = Polar2D(pt, ang + 90.0000, (1.5000 * scl)) ;
local pA7 = Polar2D(pt, ang + 90.0000, (1.7500 * scl)) ; local pA8 = Polar2D(pt, ang + 90.0000, (2.0000 * scl)) ;
local pA9 = Polar2D(pt, ang + 90.0000, (2.2500 * scl)) ; local pA10 = Polar2D(pt, ang + 90.0000, (2.5000 * scl)) ;
local pB0 = Polar2D(pt, ang + 0.0000, (0.2500 * scl)) ; local pB1 = Polar2D(pt, ang + 45.0000, (0.3536 * scl)) ;
local pB2 = Polar2D(pt, ang + 63.4352, (0.5590 * scl)) ; local pB3 = Polar2D(pt, ang + 71.5651, (0.7906 * scl)) ;
local pB4 = Polar2D(pt, ang + 75.9638, (1.0308 * scl)) ; local pB5 = Polar2D(pt, ang + 78.6901, (1.2748 * scl)) ;
local pB6 = Polar2D(pt, ang + 80.5376, (1.5207 * scl)) ; local pB7 = Polar2D(pt, ang + 81.8699, (1.7678 * scl)) ;
local pB8 = Polar2D(pt, ang + 82.8750, (2.0156 * scl)) ; local pB10 = Polar2D(pt, ang + 84.2894, (2.5125 * scl)) ;
local pC0 = Polar2D(pt, ang + 0.0000, (0.5000 * scl)) ; local pC1 = Polar2D(pt, ang + 26.5650, (0.5590 * scl)) ;
local pC2 = Polar2D(pt, ang + 45.0000, (0.7071 * scl)) ; local pC3 = Polar2D(pt, ang + 56.3099, (0.9014 * scl)) ;
local pC4 = Polar2D(pt, ang + 63.4342, (1.1180 * scl)) ; local pC5 = Polar2D(pt, ang + 68.1993, (1.3463 * scl)) ;
local pC6 = Polar2D(pt, ang + 71.5650, (1.5811 * scl)) ; local pC7 = Polar2D(pt, ang + 63.4342, (1.1180 * scl)) ;
local pC8 = Polar2D(pt, ang + 75.9640, (2.0616 * scl)) ; local pC10 = Polar2D(pt, ang + 78.6899, (2.5495 * scl)) ;
local pD0 = Polar2D(pt, ang + 0.0000, (0.6250 * scl)) ; local pD1 = Polar2D(pt, ang + 21.8014, (0.6731 * scl)) ;
local pD2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl)) ; local pD4 = Polar2D(pt, ang + 57.9946, (1.1792 * scl)) ;
local pD7 = Polar2D(pt, ang + 70.3462, (1.8583 * scl)) ; local pD8 = Polar2D(pt, ang + 72.6460, (2.0954 * scl)) ;
local pE0 = Polar2D(pt, ang + 0.0000, (0.7500 * scl)) ; local pE1 = Polar2D(pt, ang + 18.4346, (0.7906 * scl)) ;
local pE2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl)) ; local pE3 = Polar2D(pt, ang + 45.0000, (1.0607 * scl)) ;
local pE5 = Polar2D(pt, ang + 59.0371, (1.4578 * scl)) ; local pE6 = Polar2D(pt, ang + 63.4349, (1.6771 * scl)) ;
local pE7 = Polar2D(pt, ang + 66.4349, (1.9039 * scl)) ; local pE8 = Polar2D(pt, ang + 69.4440, (2.1360 * scl)) ;
local pF0 = Polar2D(pt, ang + 0.0000, (1.0000 * scl)) ; local pF1 = Polar2D(pt, ang + 14.0360, (1.0308 * scl)) ;
local pF2 = Polar2D(pt, ang + 26.5651, (1.1180 * scl)) ; local pF3 = Polar2D(pt, ang + 36.8699, (1.2500 * scl)) ;
local pF4 = Polar2D(pt, ang + 45.0000, (1.4142 * scl)) ; local pF5 = Polar2D(pt, ang + 51.3425, (1.6006 * scl)) ;
local pF6 = Polar2D(pt, ang + 56.3099, (1.8025 * scl)) ; local pF7 = Polar2D(pt, ang + 60.2551, (2.0156 * scl)) ;
local pF8 = Polar2D(pt, ang + 63.4349, (2.2361 * scl)) ; local pG0 = Polar2D(pt, ang + 0.0000, (1.2500 * scl)) ;
local pG1 = Polar2D(pt, ang + 11.3099, (1.2748 * scl)) ; local pG2 = Polar2D(pt, ang + 21.8014, (1.3463 * scl)) ;
local pG3 = Polar2D(pt, ang + 30.9638, (1.4577 * scl)) ; local pG4 = Polar2D(pt, ang + 38.6598, (1.6008 * scl)) ;
local pG5 = Polar2D(pt, ang + 45.0000, (1.7678 * scl)) ; local pG6 = Polar2D(pt, ang + 50.1944, (1.9526 * scl)) ;
local pG7 = Polar2D(pt, ang + 54.4623, (2.1506 * scl)) ; local pG8 = Polar2D(pt, ang + 57.9946, (2.3585 * scl)) ;
local pG10 = Polar2D(pt,59.0362, (2.9155 * scl)) ; local pH0 = Polar2D(pt, ang + 0.0000, (1.5000 * scl)) ;
local pH10 = Polar2D(pt,63.4349, (2.7951 * scl)) ; local layer = job.LayerManager:GetLayerWithName(lay) ;
local line = Contour(0.0) ;
-- ------------------------------------------------------------------
if letter == 32 then
pH0 = pH0
end
if letter == 33 then
line:AppendPoint(pB0) ; line:LineTo(pE0) ; line:LineTo(pE2) ; line:LineTo(pB2) ; line:LineTo(pB0) ; group:AddTail(line) ;
line = Contour(0.0) line:AppendPoint(pB3) ; line:LineTo(pE3) ; line:LineTo(pE8) ; line:LineTo(pB8) ; line:LineTo(pB3) ; group:AddTail(line) ;
end
if letter == 34 then
line:AppendPoint(pA7) ; line:LineTo(pB10) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB7) ; line:LineTo(pC10) ;
group:AddTail(line) ; pH0 = pE0
end
if letter == 35 then
line:AppendPoint(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ;
line:LineTo(pG6) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ;
line = Contour(0.0) ; line:AppendPoint(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ;
end
if letter == 36 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ;
line:LineTo(pB4) ; line:LineTo(pA5) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; group:AddTail(line) ;
line = Contour(0.0) ; line:AppendPoint(pC0) ; line:LineTo(pE0) ; line:LineTo(pE8) ; line:LineTo(pC8) ; line:LineTo(pC0) ; group:AddTail(line) ;
end
if letter == 37 then
line:AppendPoint(pC6) ; line:LineTo(pC8) ; line:LineTo(pA8) ; line:LineTo(pA6) ; line:LineTo(pE6) ; line:LineTo(pG8) ;
line:LineTo(pA0) ; line:LineTo(pC2) ; line:LineTo(pG2) ; line:LineTo(pG0) ; line:LineTo(pE0) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 38 then
line:AppendPoint(pG2) ; line:LineTo(pG1) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; line:LineTo(pA3) ;
line:LineTo(pE6) ; line:LineTo(pE7) ; line:LineTo(pD8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA6) ; line:LineTo(pG0) ;
group:AddTail(line) ;
end
if letter == 39 then
line:AppendPoint(pA7) ; line:LineTo(pB10) ; group:AddTail(line) ; pH0 = pC0
end
if letter == 40 then
line:AppendPoint(pB8) ; line:LineTo(pA5) ; line:LineTo(pA3) ; line:LineTo(pB0) ; group:AddTail(line) ; pH0 = pD0
end
if letter == 41 then
line:AppendPoint(pA8) ; line:LineTo(pB5) ; line:LineTo(pB3) ; line:LineTo(pA0) ; group:AddTail(line) ; pH0 = pG0
end
if letter == 42 then
line:AppendPoint(pA2) ; line:LineTo(pG6) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ; line:LineTo(pG2) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD7) ;
line:LineTo(pD1) ; group:AddTail(line) ;
end
if letter == 43 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD1) ; line:LineTo(pD7) ;
group:AddTail(line)
end
if letter == 44 then
line:AppendPoint(pC0) ; line:LineTo(pE2) ; line:LineTo(pC2) ; line:LineTo(pC4) ; line:LineTo(pF4) ; line:LineTo(pF2) ;
line:LineTo(pD0) ; line:LineTo(pC0) ; group:AddTail(line) ;
end
if letter == 45 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 46 then
line:AppendPoint(pA1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; line:LineTo(pA0) ; line:LineTo(pA1) ; group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 47 then
line:AppendPoint(pA0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 48 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG8) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 49 then
line:AppendPoint(pA6) ; line:LineTo(pD8) ; line:LineTo(pD0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 50 then
line:AppendPoint(pA6) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ;
line:LineTo(pA2) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 51 then
line:AppendPoint(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pG3) ; line:LineTo(pG1) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pF4) ; line:LineTo(pB4) ; group:AddTail(line) ;
end
if letter == 52 then
line:AppendPoint(pF0) ; line:LineTo(pF8) ; line:LineTo(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ;
end
if letter == 53 then
line:AppendPoint(pG8) ; line:LineTo(pA8) ; line:LineTo(pA5) ; line:LineTo(pF4) ; line:LineTo(pG3) ; line:LineTo(pG1) ;
line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
if letter == 54 then
line:AppendPoint(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA1) ; line:LineTo(pB0) ;
line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; line:LineTo(pB4) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
if letter == 55 then
line:AppendPoint(pB0) ; line:LineTo(pG8) ; line:LineTo(pA8) ; group:AddTail(line) ;
end
if letter == 56 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ;
line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA5) ; line:LineTo(pB4) ;
line:LineTo(pA3) ; line:LineTo(pA1) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB4) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 57 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG3) ; line:LineTo(pG7) ; line:LineTo(pF8) ;
line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA5) ; line:LineTo(pB4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; group:AddTail(line) ;
end
if letter == 58 then
line:AppendPoint(pB8) ; line:LineTo(pA8) ; line:LineTo(pA7) ; line:LineTo(pB7) ; line:LineTo(pB8) ; line:LineTo(pA8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; line:LineTo(pA0) ; line:LineTo(pA1) ;
group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 59 then
line:AppendPoint(pB8) ; line:LineTo(pA8) ; line:LineTo(pA7) ; line:LineTo(pB7) ; line:LineTo(pB8) ; line:LineTo(pA8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB3) ; line:LineTo(pB4) ; line:LineTo(pA4) ; line:LineTo(pA3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 60 then
line:AppendPoint(pF8) ; line:LineTo(pA4) ; line:LineTo(pG0) ; group:AddTail(line)
end
if letter == 61 then
line:AppendPoint(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ;
line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 62 then
line:AppendPoint(pA8) ; line:LineTo(pF4) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 63 then
line:AppendPoint(pB5) ; line:LineTo(pA6) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pE8) ; line:LineTo(pF7) ;
line:LineTo(pF5) ; line:LineTo(pC3) ; line:LineTo(pC2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB0) ; line:LineTo(pE0) ;
line:LineTo(pE1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 64 then
line:AppendPoint(pG0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ;
line:LineTo(pG6) ; line:LineTo(pG3) ; line:LineTo(pE2) ; line:LineTo(pB2) ; line:LineTo(pB5) ; line:LineTo(pE5) ; line:LineTo(pE2) ;
group:AddTail(line)
end
if letter == 65 then
line:AppendPoint(pA0) ; line:LineTo(pD8) ; line:LineTo(pG0) ; line:LineTo(pF3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 66 then
line:AppendPoint(pA4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 67 then
line:AppendPoint(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ;
line:LineTo(pF8) ; line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 68 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 69 then
line:AppendPoint(pG0) ; line:LineTo(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pA4) ; line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 70 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ;
line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 71 then
line:AppendPoint(pG6) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA2) ;
line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG3) ; line:LineTo(pE3) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 72 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pG8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 73 then
line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ; line:LineTo(pC0) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ; line:LineTo(pC8) ; group:AddTail(line) ; pH0 = pE0 ;
end
if letter == 74 then
line:AppendPoint(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ; line:LineTo(pC8) ;
group:AddTail(line) ;
end
if letter == 75 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA2) ; line:LineTo(pG7) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 76 then
line:AppendPoint(pA8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 77 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 78 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 79 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 80 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ;
end
if letter == 81 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pD4) ; group:AddTail(line)
end
if letter == 82 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 83 then
line:AppendPoint(pG5) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA5) ;
line:LineTo(pG3) ; line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA3) ; group:AddTail(line) ;
end
if letter == 84 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD8) ;
line:LineTo(pD0) ; group:AddTail(line) ;
end
if letter == 85 then
line:AppendPoint(pA8) ; line:LineTo(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ;
group:AddTail(line) ;
end
if letter == 86 then
line:AppendPoint(pA8) ; line:LineTo(pD0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 87 then
line:AppendPoint(pA8) ; line:LineTo(pB0) ; line:LineTo(pD4) ; line:LineTo(pF0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 88 then
line:AppendPoint(pA0) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 89 then
line:AppendPoint(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD0) ;
line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 90 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 91 then
line:AppendPoint(pC0) ; line:LineTo(pB0) ; line:LineTo(pB8) ; line:LineTo(pC8) ; group:AddTail(line) ;
end
if letter == 92 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 93 then
line:AppendPoint(pE0) ; line:LineTo(pF0) ; line:LineTo(pF8) ; line:LineTo(pE8) ; group:AddTail(line) ;
end
if letter == 94 then
line:AppendPoint(pD8) ; line:LineTo(pG6) ; line:LineTo(pG5) ; line:LineTo(pD7) ; line:LineTo(pA5) ; line:LineTo(pA6) ;
line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 95 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; group:AddTail(line) ;
end
if letter == 96 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
-- Start of Lower Case
if letter == 97 then
line:AppendPoint(pA0) ; line:LineTo(pD8) ; line:LineTo(pG0) ; line:LineTo(pF3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 98 then
line:AppendPoint(pA4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 99 then
line:AppendPoint(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ;
line:LineTo(pF8) ; line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 100 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 101 then
line:AppendPoint(pG0) ; line:LineTo(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pA4) ; line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 102 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ;
line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 103 then
line:AppendPoint(pG6) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA2) ;
line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG3) ; line:LineTo(pE3) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 104 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pG8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 105 then
line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ; line:LineTo(pC0) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ; line:LineTo(pC8) ; group:AddTail(line) ; pH0 = pE0 ;
end
if letter == 106 then
line:AppendPoint(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ; line:LineTo(pC8) ;
group:AddTail(line) ;
end
if letter == 107 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA2) ; line:LineTo(pG7) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 108 then
line:AppendPoint(pA8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 109 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 110 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 111 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 112 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ;
end
if letter == 113 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pD4) ; group:AddTail(line)
end
if letter == 114 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 115 then
line:AppendPoint(pG5) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA5) ;
line:LineTo(pG3) ; line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA3) ; group:AddTail(line) ;
end
if letter == 116 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD8) ;
line:LineTo(pD0) ; group:AddTail(line) ;
end
if letter == 117 then
line:AppendPoint(pA8) ; line:LineTo(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ;
group:AddTail(line) ;
end
if letter == 118 then
line:AppendPoint(pA8) ; line:LineTo(pD0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 119 then
line:AppendPoint(pA8) ; line:LineTo(pB0) ; line:LineTo(pD4) ; line:LineTo(pF0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 120 then
line:AppendPoint(pA0) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 121 then
line:AppendPoint(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD0) ;
line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 122 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
-- End of Lower Case
if letter == 123 then
line:AppendPoint(pD0) ; line:LineTo(pC0) ; line:LineTo(pB1) ; line:LineTo(pB2) ; line:LineTo(pC3) ; line:LineTo(pA4) ;
line:LineTo(pC5) ; line:LineTo(pB6) ; line:LineTo(pB7) ; line:LineTo(pC8) ; line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 124 then
line:AppendPoint(pA0) ; line:LineTo(pA10) ; line:LineTo(pC10) ; line:LineTo(pC0) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 125 then
line:AppendPoint(pD0) ; line:LineTo(pE0) ; line:LineTo(pF1) ; line:LineTo(pF2) ; line:LineTo(pE3) ; line:LineTo(pG4) ;
line:LineTo(pE5) ; line:LineTo(pF6) ; line:LineTo(pF7) ; line:LineTo(pE8) ; line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 126 then
line:AppendPoint(pA2) ; line:LineTo(pA3) ; line:LineTo(pB5) ; line:LineTo(pF3) ; line:LineTo(pG5) ;
line:LineTo(pG4) ; line:LineTo(pF2) ; line:LineTo(pB4) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
return pH0
end -- function end
-- ==============================================================================
local function AddGroupToJob(job, group, layer_name)
-- create a CadObject to represent the group
local cad_object = CreateCadGroup(group);
-- create a layer with passed name if it doesnt already exist
local layer = job.LayerManager:GetLayerWithName(layer_name)
-- and add our object to it
layer:AddObject(cad_object, true)
return cad_object
end -- end function
-- =========================================================================
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: Not finding a job loaded")
return false
end
local strlen = string.len(what)
local strup = string.upper(what)
local x = strlen
local i = 1
local y = ""
local ptx = where
group = ContourGroup(true)
while i <= x do
y = string.byte(string.sub(strup, i, i))
ptx = MonoFont(job, ptx, y, size, lay, ang)
i = i + 1
end -- while end;
AddGroupToJob(job, group, lay)
job:Refresh2DView()
return true ;
end -- Draw Text function end
-- =====================================================]]
function DrawWriter(what, where, size, lay, ang)
local group
--[[ How to use:
| local TextMessage = "Your Text Here"
| local TextPt = Point2D(3.5,3.8)
| local TextHight = 0.5
| local TextLayer = "Jim Anderson"
| local TextAng = 20.0
| DrawWriter(TextMessage ,local TextPt , TextHight , TextLayer,TextAng )
| -- ==Draw Writer==
| -- Utilizing a provided string of text, the program walks the string and reproduces each letter (parametrically) on the drawing using vectors.
function main()
-- create a layer with passed name if it doesn't already exist
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("No job loaded")
return false;
end
local TextMessage = "Aa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll Mm Nn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz 1 2 3 4 5 6 7 8 9 0 ! @ # $ % & * ( ) { } [ ] ? , . : ; '' ' _ - + = ~ ^ < > |"
local TextPt = Point2D(0.1, 2.0)
local TextHight = 0.25
local TextLayer = "Gadget Text"
local TextAng = 10.0
DrawWriter(TextMessage, TextPt, TextHight, TextLayer, TextAng)
job:Refresh2DView()
return true
end
-- -----------------------------------------------------]]
-- ==============================================================================
local function Polar2D(pt, ang, dis)
return Point2D((pt.X + dis * math.cos(math.rad(ang))), (pt.Y + dis * math.sin(math.rad(ang))))
end
-- ==============================================================================
local function MonoFont(job, pt, letter, scl, lay, ang)
scl = (scl * 0.5) ;
local pA0 = pt ;
local pA1 = Polar2D(pt, ang + 90.0000, (0.2500 * scl)) ; local pA2 = Polar2D(pt, ang + 90.0000, (0.5000 * scl)) ;
local pA3 = Polar2D(pt, ang + 90.0000, (0.7500 * scl)) ; local pA4 = Polar2D(pt, ang + 90.0000, (1.0000 * scl)) ;
local pA5 = Polar2D(pt, ang + 90.0000, (1.2500 * scl)) ; local pA6 = Polar2D(pt, ang + 90.0000, (1.5000 * scl)) ;
local pA7 = Polar2D(pt, ang + 90.0000, (1.7500 * scl)) ; local pA8 = Polar2D(pt, ang + 90.0000, (2.0000 * scl)) ;
local pA9 = Polar2D(pt, ang + 90.0000, (2.2500 * scl)) ; local pA10 = Polar2D(pt, ang + 90.0000, (2.5000 * scl)) ;
local pB0 = Polar2D(pt, ang + 0.0000, (0.2500 * scl)) ; local pB1 = Polar2D(pt, ang + 45.0000, (0.3536 * scl)) ;
local pB2 = Polar2D(pt, ang + 63.4352, (0.5590 * scl)) ; local pB3 = Polar2D(pt, ang + 71.5651, (0.7906 * scl)) ;
local pB4 = Polar2D(pt, ang + 75.9638, (1.0308 * scl)) ; local pB5 = Polar2D(pt, ang + 78.6901, (1.2748 * scl)) ;
local pB6 = Polar2D(pt, ang + 80.5376, (1.5207 * scl)) ; local pB7 = Polar2D(pt, ang + 81.8699, (1.7678 * scl)) ;
local pB8 = Polar2D(pt, ang + 82.8750, (2.0156 * scl)) ; local pB10 = Polar2D(pt, ang + 84.2894, (2.5125 * scl)) ;
local pC0 = Polar2D(pt, ang + 0.0000, (0.5000 * scl)) ; local pC1 = Polar2D(pt, ang + 26.5650, (0.5590 * scl)) ;
local pC2 = Polar2D(pt, ang + 45.0000, (0.7071 * scl)) ; local pC3 = Polar2D(pt, ang + 56.3099, (0.9014 * scl)) ;
local pC4 = Polar2D(pt, ang + 63.4342, (1.1180 * scl)) ; local pC5 = Polar2D(pt, ang + 68.1993, (1.3463 * scl)) ;
local pC6 = Polar2D(pt, ang + 71.5650, (1.5811 * scl)) ; local pC7 = Polar2D(pt, ang + 63.4342, (1.1180 * scl)) ;
local pC8 = Polar2D(pt, ang + 75.9640, (2.0616 * scl)) ; local pC10 = Polar2D(pt, ang + 78.6899, (2.5495 * scl)) ;
local pD0 = Polar2D(pt, ang + 0.0000, (0.6250 * scl)) ; local pD1 = Polar2D(pt, ang + 21.8014, (0.6731 * scl)) ;
local pD2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl)) ; local pD4 = Polar2D(pt, ang + 57.9946, (1.1792 * scl)) ;
local pD7 = Polar2D(pt, ang + 70.3462, (1.8583 * scl)) ; local pD8 = Polar2D(pt, ang + 72.6460, (2.0954 * scl)) ;
local pE0 = Polar2D(pt, ang + 0.0000, (0.7500 * scl)) ; local pE1 = Polar2D(pt, ang + 18.4346, (0.7906 * scl)) ;
local pE2 = Polar2D(pt, ang + 33.6901, (0.9014 * scl)) ; local pE3 = Polar2D(pt, ang + 45.0000, (1.0607 * scl)) ;
local pE5 = Polar2D(pt, ang + 59.0371, (1.4578 * scl)) ; local pE6 = Polar2D(pt, ang + 63.4349, (1.6771 * scl)) ;
local pE7 = Polar2D(pt, ang + 66.4349, (1.9039 * scl)) ; local pE8 = Polar2D(pt, ang + 69.4440, (2.1360 * scl)) ;
local pF0 = Polar2D(pt, ang + 0.0000, (1.0000 * scl)) ; local pF1 = Polar2D(pt, ang + 14.0360, (1.0308 * scl)) ;
local pF2 = Polar2D(pt, ang + 26.5651, (1.1180 * scl)) ; local pF3 = Polar2D(pt, ang + 36.8699, (1.2500 * scl)) ;
local pF4 = Polar2D(pt, ang + 45.0000, (1.4142 * scl)) ; local pF5 = Polar2D(pt, ang + 51.3425, (1.6006 * scl)) ;
local pF6 = Polar2D(pt, ang + 56.3099, (1.8025 * scl)) ; local pF7 = Polar2D(pt, ang + 60.2551, (2.0156 * scl)) ;
local pF8 = Polar2D(pt, ang + 63.4349, (2.2361 * scl)) ; local pG0 = Polar2D(pt, ang + 0.0000, (1.2500 * scl)) ;
local pG1 = Polar2D(pt, ang + 11.3099, (1.2748 * scl)) ; local pG2 = Polar2D(pt, ang + 21.8014, (1.3463 * scl)) ;
local pG3 = Polar2D(pt, ang + 30.9638, (1.4577 * scl)) ; local pG4 = Polar2D(pt, ang + 38.6598, (1.6008 * scl)) ;
local pG5 = Polar2D(pt, ang + 45.0000, (1.7678 * scl)) ; local pG6 = Polar2D(pt, ang + 50.1944, (1.9526 * scl)) ;
local pG7 = Polar2D(pt, ang + 54.4623, (2.1506 * scl)) ; local pG8 = Polar2D(pt, ang + 57.9946, (2.3585 * scl)) ;
local pG10 = Polar2D(pt,59.0362, (2.9155 * scl)) ; local pH0 = Polar2D(pt, ang + 0.0000, (1.5000 * scl)) ;
local pH10 = Polar2D(pt,63.4349, (2.7951 * scl)) ; local layer = job.LayerManager:GetLayerWithName(lay) ;
local line = Contour(0.0) ;
-- ------------------------------------------------------------------
if letter == 32 then
pH0 = pH0
end
if letter == 33 then
line:AppendPoint(pB0) ; line:LineTo(pE0) ; line:LineTo(pE2) ; line:LineTo(pB2) ; line:LineTo(pB0) ; group:AddTail(line) ;
line = Contour(0.0) line:AppendPoint(pB3) ; line:LineTo(pE3) ; line:LineTo(pE8) ; line:LineTo(pB8) ; line:LineTo(pB3) ; group:AddTail(line) ;
end
if letter == 34 then
line:AppendPoint(pA7) ; line:LineTo(pB10) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB7) ; line:LineTo(pC10) ;
group:AddTail(line) ; pH0 = pE0
end
if letter == 35 then
line:AppendPoint(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ;
line:LineTo(pG6) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ;
line = Contour(0.0) ; line:AppendPoint(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ;
end
if letter == 36 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ;
line:LineTo(pB4) ; line:LineTo(pA5) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; group:AddTail(line) ;
line = Contour(0.0) ; line:AppendPoint(pC0) ; line:LineTo(pE0) ; line:LineTo(pE8) ; line:LineTo(pC8) ; line:LineTo(pC0) ; group:AddTail(line) ;
end
if letter == 37 then
line:AppendPoint(pC6) ; line:LineTo(pC8) ; line:LineTo(pA8) ; line:LineTo(pA6) ; line:LineTo(pE6) ; line:LineTo(pG8) ;
line:LineTo(pA0) ; line:LineTo(pC2) ; line:LineTo(pG2) ; line:LineTo(pG0) ; line:LineTo(pE0) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 38 then
line:AppendPoint(pG2) ; line:LineTo(pG1) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; line:LineTo(pA3) ;
line:LineTo(pE6) ; line:LineTo(pE7) ; line:LineTo(pD8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA6) ; line:LineTo(pG0) ;
group:AddTail(line) ;
end
if letter == 39 then
line:AppendPoint(pA7) ; line:LineTo(pB10) ; group:AddTail(line) ; pH0 = pC0
end
if letter == 40 then
line:AppendPoint(pB8) ; line:LineTo(pA5) ; line:LineTo(pA3) ; line:LineTo(pB0) ; group:AddTail(line) ; pH0 = pD0
end
if letter == 41 then
line:AppendPoint(pA8) ; line:LineTo(pB5) ; line:LineTo(pB3) ; line:LineTo(pA0) ; group:AddTail(line) ; pH0 = pG0
end
if letter == 42 then
line:AppendPoint(pA2) ; line:LineTo(pG6) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ; line:LineTo(pG2) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD7) ;
line:LineTo(pD1) ; group:AddTail(line) ;
end
if letter == 43 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD1) ; line:LineTo(pD7) ;
group:AddTail(line)
end
if letter == 44 then
line:AppendPoint(pC0) ; line:LineTo(pE2) ; line:LineTo(pC2) ; line:LineTo(pC4) ; line:LineTo(pF4) ; line:LineTo(pF2) ;
line:LineTo(pD0) ; line:LineTo(pC0) ; group:AddTail(line) ;
end
if letter == 45 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 46 then
line:AppendPoint(pA1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; line:LineTo(pA0) ; line:LineTo(pA1) ; group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 47 then
line:AppendPoint(pA0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 48 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG8) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 49 then
line:AppendPoint(pA6) ; line:LineTo(pD8) ; line:LineTo(pD0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 50 then
line:AppendPoint(pA6) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ;
line:LineTo(pA2) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 51 then
line:AppendPoint(pA7) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pG3) ; line:LineTo(pG1) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pF4) ; line:LineTo(pB4) ; group:AddTail(line) ;
end
if letter == 52 then
line:AppendPoint(pF0) ; line:LineTo(pF8) ; line:LineTo(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ;
end
if letter == 53 then
line:AppendPoint(pG8) ; line:LineTo(pA8) ; line:LineTo(pA5) ; line:LineTo(pF4) ; line:LineTo(pG3) ; line:LineTo(pG1) ;
line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA1) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
if letter == 54 then
line:AppendPoint(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA1) ; line:LineTo(pB0) ;
line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; line:LineTo(pB4) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
if letter == 55 then
line:AppendPoint(pB0) ; line:LineTo(pG8) ; line:LineTo(pA8) ; group:AddTail(line) ;
end
if letter == 56 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ;
line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA5) ; line:LineTo(pB4) ;
line:LineTo(pA3) ; line:LineTo(pA1) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB4) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 57 then
line:AppendPoint(pA1) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG3) ; line:LineTo(pG7) ; line:LineTo(pF8) ;
line:LineTo(pB8) ; line:LineTo(pA7) ; line:LineTo(pA5) ; line:LineTo(pB4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; group:AddTail(line) ;
end
if letter == 58 then
line:AppendPoint(pB8) ; line:LineTo(pA8) ; line:LineTo(pA7) ; line:LineTo(pB7) ; line:LineTo(pB8) ; line:LineTo(pA8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; line:LineTo(pA0) ; line:LineTo(pA1) ;
group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 59 then
line:AppendPoint(pB8) ; line:LineTo(pA8) ; line:LineTo(pA7) ; line:LineTo(pB7) ; line:LineTo(pB8) ; line:LineTo(pA8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB3) ; line:LineTo(pB4) ; line:LineTo(pA4) ; line:LineTo(pA3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ; pH0 = pD0 ;
end
if letter == 60 then
line:AppendPoint(pF8) ; line:LineTo(pA4) ; line:LineTo(pG0) ; group:AddTail(line)
end
if letter == 61 then
line:AppendPoint(pA2) ; line:LineTo(pG2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA6) ;
line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 62 then
line:AppendPoint(pA8) ; line:LineTo(pF4) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 63 then
line:AppendPoint(pB5) ; line:LineTo(pA6) ; line:LineTo(pA7) ; line:LineTo(pB8) ; line:LineTo(pE8) ; line:LineTo(pF7) ;
line:LineTo(pF5) ; line:LineTo(pC3) ; line:LineTo(pC2) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pB0) ; line:LineTo(pE0) ;
line:LineTo(pE1) ; line:LineTo(pB1) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 64 then
line:AppendPoint(pG0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ;
line:LineTo(pG6) ; line:LineTo(pG3) ; line:LineTo(pE2) ; line:LineTo(pB2) ; line:LineTo(pB5) ; line:LineTo(pE5) ; line:LineTo(pE2) ;
group:AddTail(line)
end
if letter == 65 then
line:AppendPoint(pA0) ; line:LineTo(pD8) ; line:LineTo(pG0) ; line:LineTo(pF3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 66 then
line:AppendPoint(pA4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 67 then
line:AppendPoint(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ;
line:LineTo(pF8) ; line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 68 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 69 then
line:AppendPoint(pG0) ; line:LineTo(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pA4) ; line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 70 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ;
line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 71 then
line:AppendPoint(pG6) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA2) ;
line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG3) ; line:LineTo(pE3) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 72 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pG8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 73 then
line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ; line:LineTo(pC0) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ; line:LineTo(pC8) ; group:AddTail(line) ; pH0 = pE0 ;
end
if letter == 74 then
line:AppendPoint(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ; line:LineTo(pC8) ;
group:AddTail(line) ;
end
if letter == 75 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA2) ; line:LineTo(pG7) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 76 then
line:AppendPoint(pA8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 77 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 78 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 79 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 80 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ;
end
if letter == 81 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pD4) ; group:AddTail(line)
end
if letter == 82 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 83 then
line:AppendPoint(pG5) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA5) ;
line:LineTo(pG3) ; line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA3) ; group:AddTail(line) ;
end
if letter == 84 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD8) ;
line:LineTo(pD0) ; group:AddTail(line) ;
end
if letter == 85 then
line:AppendPoint(pA8) ; line:LineTo(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ;
group:AddTail(line) ;
end
if letter == 86 then
line:AppendPoint(pA8) ; line:LineTo(pD0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 87 then
line:AppendPoint(pA8) ; line:LineTo(pB0) ; line:LineTo(pD4) ; line:LineTo(pF0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 88 then
line:AppendPoint(pA0) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 89 then
line:AppendPoint(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD0) ;
line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 90 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 91 then
line:AppendPoint(pC0) ; line:LineTo(pB0) ; line:LineTo(pB8) ; line:LineTo(pC8) ; group:AddTail(line) ;
end
if letter == 92 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 93 then
line:AppendPoint(pE0) ; line:LineTo(pF0) ; line:LineTo(pF8) ; line:LineTo(pE8) ; group:AddTail(line) ;
end
if letter == 94 then
line:AppendPoint(pD8) ; line:LineTo(pG6) ; line:LineTo(pG5) ; line:LineTo(pD7) ; line:LineTo(pA5) ; line:LineTo(pA6) ;
line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 95 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; group:AddTail(line) ;
end
if letter == 96 then
line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
-- Start of Lower Case
if letter == 97 then
line:AppendPoint(pA0) ; line:LineTo(pD8) ; line:LineTo(pG0) ; line:LineTo(pF3) ; line:LineTo(pB3) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 98 then
line:AppendPoint(pA4) ; line:LineTo(pF4) ; line:LineTo(pG5) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; line:LineTo(pF0) ; line:LineTo(pG1) ; line:LineTo(pG3) ; line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 99 then
line:AppendPoint(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ;
line:LineTo(pF8) ; line:LineTo(pG6) ; group:AddTail(line) ;
end
if letter == 100 then
line:AppendPoint(pA0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pA8) ;
line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 101 then
line:AppendPoint(pG0) ; line:LineTo(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; group:AddTail(line) ; line = Contour(0.0) ;
line:AppendPoint(pA4) ; line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 102 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ;
line:LineTo(pF4) ; group:AddTail(line) ;
end
if letter == 103 then
line:AppendPoint(pG6) ; line:LineTo(pG7) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA2) ;
line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG3) ; line:LineTo(pE3) ; line:LineTo(pE2) ; group:AddTail(line) ;
end
if letter == 104 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pG8) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA4) ; line:LineTo(pG4) ; group:AddTail(line) ;
end
if letter == 105 then
line:AppendPoint(pB0) ; line:LineTo(pB8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA0) ; line:LineTo(pC0) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ; line:LineTo(pC8) ; group:AddTail(line) ; pH0 = pE0 ;
end
if letter == 106 then
line:AppendPoint(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ; line:LineTo(pC8) ;
group:AddTail(line) ;
end
if letter == 107 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA2) ; line:LineTo(pG7) ;
group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 108 then
line:AppendPoint(pA8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 109 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 110 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF0) ; line:LineTo(pF8) ; group:AddTail(line) ; pH0 = pG0 ;
end
if letter == 111 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ;
end
if letter == 112 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ;
end
if letter == 113 then
line:AppendPoint(pB0) ; line:LineTo(pA2) ; line:LineTo(pA6) ; line:LineTo(pB8) ; line:LineTo(pF8) ; line:LineTo(pG6) ;
line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pG0) ; line:LineTo(pD4) ; group:AddTail(line)
end
if letter == 114 then
line:AppendPoint(pA0) ; line:LineTo(pA8) ; line:LineTo(pF8) ; line:LineTo(pG7) ; line:LineTo(pG5) ; line:LineTo(pF4) ;
line:LineTo(pA4) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD4) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 115 then
line:AppendPoint(pG5) ; line:LineTo(pG6) ; line:LineTo(pF8) ; line:LineTo(pB8) ; line:LineTo(pA6) ; line:LineTo(pA5) ;
line:LineTo(pG3) ; line:LineTo(pG2) ; line:LineTo(pF0) ; line:LineTo(pB0) ; line:LineTo(pA2) ; line:LineTo(pA3) ; group:AddTail(line) ;
end
if letter == 116 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD8) ;
line:LineTo(pD0) ; group:AddTail(line) ;
end
if letter == 117 then
line:AppendPoint(pA8) ; line:LineTo(pA2) ; line:LineTo(pB0) ; line:LineTo(pF0) ; line:LineTo(pG2) ; line:LineTo(pG8) ;
group:AddTail(line) ;
end
if letter == 118 then
line:AppendPoint(pA8) ; line:LineTo(pD0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 119 then
line:AppendPoint(pA8) ; line:LineTo(pB0) ; line:LineTo(pD4) ; line:LineTo(pF0) ; line:LineTo(pG8) ; group:AddTail(line) ;
end
if letter == 120 then
line:AppendPoint(pA0) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pA8) ;
line:LineTo(pG0) ; group:AddTail(line) ;
end
if letter == 121 then
line:AppendPoint(pA8) ; line:LineTo(pD4) ; line:LineTo(pG8) ; group:AddTail(line) ; line = Contour(0.0) ; line:AppendPoint(pD0) ;
line:LineTo(pD4) ; group:AddTail(line) ;
end
if letter == 122 then
line:AppendPoint(pA8) ; line:LineTo(pG8) ; line:LineTo(pA0) ; line:LineTo(pG0) ; group:AddTail(line) ;
end
-- End of Lower Case
if letter == 123 then
line:AppendPoint(pD0) ; line:LineTo(pC0) ; line:LineTo(pB1) ; line:LineTo(pB2) ; line:LineTo(pC3) ; line:LineTo(pA4) ;
line:LineTo(pC5) ; line:LineTo(pB6) ; line:LineTo(pB7) ; line:LineTo(pC8) ; line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 124 then
line:AppendPoint(pA0) ; line:LineTo(pA10) ; line:LineTo(pC10) ; line:LineTo(pC0) ; line:LineTo(pA0) ; group:AddTail(line) ;
end
if letter == 125 then
line:AppendPoint(pD0) ; line:LineTo(pE0) ; line:LineTo(pF1) ; line:LineTo(pF2) ; line:LineTo(pE3) ; line:LineTo(pG4) ;
line:LineTo(pE5) ; line:LineTo(pF6) ; line:LineTo(pF7) ; line:LineTo(pE8) ; line:LineTo(pD8) ; group:AddTail(line) ;
end
if letter == 126 then
line:AppendPoint(pA2) ; line:LineTo(pA3) ; line:LineTo(pB5) ; line:LineTo(pF3) ; line:LineTo(pG5) ;
line:LineTo(pG4) ; line:LineTo(pF2) ; line:LineTo(pB4) ; line:LineTo(pA2) ; group:AddTail(line) ;
end
return pH0
end -- function end
-- ==============================================================================
local function AddGroupToJob(job, group, layer_name)
-- create a CadObject to represent the group
local cad_object = CreateCadGroup(group);
-- create a layer with passed name if it doesnt already exist
local layer = job.LayerManager:GetLayerWithName(layer_name)
-- and add our object to it
layer:AddObject(cad_object, true)
return cad_object
end -- end function
-- =========================================================================
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: Not finding a job loaded")
return false
end
local strlen = string.len(what)
local strup = what
local x = strlen
local i = 1
local y = ""
local ptx = where
group = ContourGroup(true)
while i <= x do
y = string.byte(string.sub(strup, i, i))
if (y >= 97) and (y <= 122) then -- Lower case
ptx = MonoFont(job, ptx, y, (size * 0.75), lay, ang)
ptx = Polar2D(ptx, ang, size * 0.05)
else -- Upper case
ptx = MonoFont(job, ptx, y, size, lay, ang)
ptx = Polar2D(ptx, ang, size * 0.07)
end
i = i + 1
end -- while end;
AddGroupToJob(job, group, lay)
job:Refresh2DView()
return true
end -- Draw Text function end
-- ====================================================]]
function Holer(pt, ang, dst, dia, lay)
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
--Caller: Holer(ptx, anx, BaseDim.HoleSpace, Milling.ShelfPinRadius, Milling.LNSideShelfPinDrill .. "-Base")
local function AddGroupToJob(job, group, layer_name)
local cad_object = CreateCadGroup(group);
local layer = job.LayerManager:GetLayerWithName(layer_name)
layer:AddObject(cad_object, true)
return cad_object
end
local group = ContourGroup(true)
group:AddTail(CreateCircle(pt.x, pt.y, dia, 0.0, 0.0))
pt = Polar2D(pt, ang, dst)
group:AddTail(CreateCircle(pt.x, pt.y, dia, 0.0, 0.0))
AddGroupToJob(job, group, lay)
return true
end -- function end
-- =====================================================]]
end -- DrawTools function end
Data Export Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╔═╗╔╦╗╔═╗ ╔═╗═╗ ╦╔═╗╔═╗╦═╗╔╦╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║╠═╣ ║ ╠═╣ ║╣ ╔╩╦╝╠═╝║ ║╠╦╝ ║ ║ ║ ║║ ║║ ╚═╗
═╩╝╩ ╩ ╩ ╩ ╩ ╚═╝╩ ╚═╩ ╚═╝╩╚═ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function ExportTools()
-- =====================================================]]
function LogWriter(LogName, xText)
-- Adds a new xText Line to a app log file
-- local LogName = Door.CSVPath .. "\\" .. Door.RuntimeLog .. ".txt"
local fileW = io.open(LogName, "a")
if fileW then
fileW:write(xText .. "\n")
fileW:close()
end -- if end
Maindialog:UpdateLabelField("Door.Alert", "Note: Errors are logged in the CSF file folder.")
return true
end -- function end
-- =====================================================]]
function Write_CSV(xFilename) -- Writes the values to a csv format file
-- Usage: Write_CSV("C:\\Path\\MyName.csv")
-- Door.CSVPath = dialog:GetTextField("DoorCSVPath")
-- local filename = Path .. "\\" .. Name .. ".csv"
local filename = xFilename
xFilename
local file = io.open(filename, "w")
if file then -- if the file was opened
file:write("Count,Height,Width\n") -- Header Line
if Door.Unit then
file:write("1,110,595\n"); file:write("1,150,75\n"); file:write("1,175,395\n"); file:write("1,140,495\n")
file:write("1,175,445\n"); file:write("1,175,595\n"); file:write("2,200,100\n"); file:write("3,250,125\n")
file:write("1,300,150\n"); file:write("2,350,175\n"); file:write("3,400,200\n"); file:write("1,450,225\n")
file:write("2,500,250\n"); file:write("3,550,275\n"); file:write("1,600,300\n"); file:write("2,650,325\n")
file:write("3,700,350\n"); file:write("1,750,375\n"); file:write("2,800,400\n"); file:write("3,850,425\n");
file:write("1,900,450\n"); file:write("2,950,475\n"); file:write("3,1000,500\n"); file:write("1,1050,525\n");
file:write("2,1100,550\n"); file:write("3,1150,575\n"); file:write("1,1200,600\n"); file:write("2,1250,625\n");
file:write("3,1300,650\n"); file:write("1,1350,675\n"); file:write("2,1400,700\n"); file:write("3,1450,725\n");
file:write("1,1500,750\n"); file:write("2,1550,775\n"); file:write("3,1600,800\n"); file:write("1,1650,825\n");
file:write("2,1700,850\n"); file:write("3,1750,875\n"); file:write("1,1800,900\n"); file:write("2,1850,925\n");
file:write("3,1900,950\n"); file:write("1,1950,975\n"); file:write("2,2000,1000\n"); file:write("3,2050,1025\n");
file:write("1,2100,1050\n"); file:write("2,2150,1075\n"); file:write("3,2200,1100\n"); file:write("1,2250,1125\n");
file:write("2,2300,1150\n"); file:write("3,2350,1175\n"); file:write("1,2400,1200\n"); file:write("2,2450,1225\n")
else
file:write("1,04.5000,23.2500\n"); file:write("1,06.0000,03.3125\n"); file:write("1,06.5000,15.5000\n"); file:write("1,05.3750,19.5000\n");
file:write("1,07.1875,17.5000\n"); file:write("1,06.1875,23.5000\n"); file:write("2,07.8750,03.8750\n"); file:write("3,09.8750,05.0000\n");
file:write("1,11.7500,05.8750\n"); file:write("2,13.7500,06.6750\n"); file:write("3,15.7500,07.8750\n"); file:write("1,17.1250,08.8250\n");
file:write("2,19.5000,09.5000\n"); file:write("3,21.1250,10.3750\n"); file:write("1,23.6250,11.1250\n"); file:write("2,25.5000,12.1250\n");
file:write("3,27.6250,13.7500\n"); file:write("1,29.5000,14.7500\n"); file:write("2,31.4375,15.7500\n"); file:write("3,33.4375,16.7500\n");
file:write("1,35.4375,17.7500\n"); file:write("2,37.4375,18.6250\n"); file:write("3,39.3750,19.6250\n"); file:write("1,41.3750,20.6250\n");
file:write("2,43.3750,21.6250\n"); file:write("3,45.1875,22.6250\n"); file:write("1,47.2500,23.6250\n"); file:write("2,49.1875,24.6250\n");
file:write("3,51.1250,25.5000\n"); file:write("1,53.1250,26.5000\n"); file:write("2,55.1250,27.5000\n"); file:write("3,57.1250,28.5000\n");
file:write("1,59.1250,29.5000\n"); file:write("2,61.2500,30.5000\n"); file:write("3,62.9375,31.4375\n"); file:write("1,64.9375,32.4375\n");
file:write("2,66.9375,33.4375\n"); file:write("3,68.8125,34.4375\n"); file:write("1,70.8750,35.3750\n"); file:write("2,72.9375,36.4375\n");
file:write("3,74.8750,37.4375\n"); file:write("1,76.9375,38.3750\n"); file:write("2,78.7500,39.3750\n"); file:write("3,80.7500,40.3750\n");
file:write("1,82.6250,41.3750\n"); file:write("2,84.6250,42.3750\n"); file:write("3,86.6250,43.3750\n"); file:write("1,88.5000,44.2500\n");
file:write("2,90.6250,45.2500\n"); file:write("3,92.6250,46.2500\n"); file:write("1,94.4375,47.2500\n"); file:write("2,95.4375,48.2500\n")
end -- if end
file:close()-- closes the open file
end -- if end
return true
end
-- =====================================================]]
end -- ExportTools function end
Text File Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗═╗ ╦╔╦╗ ╔═╗╦╦ ╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ╔╩╦╝ ║ ╠╣ ║║ ║╣ ║ ║ ║║ ║║ ╚═╗
╩ ╩ ╚═ ╩ ╚ ╩╩═╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function FileTools()
-- =====================================================]]
function LengthOfFile(filename) -- Returns file line count
--[[Counts the lines in a file
Returns: number]]
local len = 0
if FileExists(filename) then
local file = io.open(filename)
if file then
for _ in file:lines() do
len = len + 1
end
file:close()
end -- if end
end
return len
end -- function end
-- =====================================================]]
function NameValidater(FileName)
local MyTrue = true
local strlen = string.len(FileName)
local strup = string.upper(FileName)
local i = 1
local y = ""
while i <= strlen do
y = string.byte(string.sub(strup, i, i))
if y == 32 then -- Space
MyTrue = false
break
elseif y == 45 then -- Dash
MyTrue = false
break
elseif y == 127 then -- Delete
MyTrue = false
break
elseif y == 126 then -- Delete
MyTrue = false
break
elseif y == 123 then -- Open brace
MyTrue = false
break
elseif y == 124 then -- Pipe
MyTrue = false
break
elseif y == 125 then -- Close brace
MyTrue = false
break
elseif -- Illegal Filename Characters
(y == 33) or -- ! Exclamation mark
(y == 34) or -- " Double Quotes
(y == 35) or -- # Hash
(y == 36) or -- $ Dollar
(y == 37) or -- % Percent
(y == 38) or -- & Ampersand
(y == 39) or -- ' Apostrophe
(y == 42) or -- * Asterisk
(y == 43) or -- + Plus
(y == 44) or -- , Comma
(y == 47) or -- / Slash
(y == 58) or -- : Colon
(y == 59) or -- ; Semi-colon
(y == 60) or -- < Less than
(y == 62) or -- > Greater than
(y == 63) or -- ? Question mark
(y == 64) or -- @ At
(y == 92) or -- \ Backslash
(y == 96) or -- ` Single Quotes
(y == 123) or -- { Open brace
(y == 124) or -- | Pipe
(y == 125) -- } Close brace
then
MyTrue = false
break
elseif (y <= 31) then -- Control Codes
MyTrue = false
break
elseif (y >= 48) and (y <= 57) then -- Numbers
MyTrue = false
break
elseif (y >= 65) and (y <= 90) then -- Uppercase A to Z
MyTrue = false
break
elseif (y >= 97) and (y <= 122) then -- Lowercase A to Z
MyTrue = false
break
elseif (y >= 65) and (y <= 90) then -- Uppercase A to Z
MyTrue = false
break
end -- if end
i = i + 1 end -- while end;
return MyTrue
end -- if end
-- =====================================================]]
function CopyFileFromTo(OldFile, NewFile) -- Copy Old File to Newfile
if FileExists(NewFile) then
DisplayMessageBox("File copy " .. File .. " failed. \n\nFile found at: " .. NewFile .. "\n" )
return false
elseif not FileExists(OldFile) then
DisplayMessageBox("File copy of " .. File .. " failed. \n\nFile not found at: " .. OldFile .. "\n" )
return false
else
local fileR = io.open(OldFile) -- reader file
local fileW = io.open(NewFile, "w") -- writer file
if fileR and fileW then -- if both files are open
for Line in fileR:lines() do
fileW:write(Line .. "\n")
end -- for end
end
if fileR then fileR:close() end
if fileW then fileW:close() end
return true
end -- for end
end -- function end
-- =====================================================]]
function ValidateName(FileName) -- Returns True if the file name is safe to use
local MyTrue = true
local strlen = string.len(FileName)
local strup = string.upper(FileName)
local i = 1
local y = ""
while i <= strlen do
y = string.byte(string.sub(strup, i, i))
if y == 32 then -- Space
MyTrue = true
elseif y == 45 then -- hyphn
MyTrue = true
elseif (y >= 48) and (y <= 57) then -- numbers
MyTrue = true
elseif (y >= 65) and (y <= 90) then -- Uppercase
MyTrue = true
else
MyTrue = false
break
end -- if end
i = i + 1
end -- while end
return MyTrue
end -- if end
-- =====================================================]]
function FileExists(name) -- Returns True if file is found
-- call = ans = FileExists("sample.txt")
local f=io.open(name,"r")
if f~=nil then io.close(f) return true else io.close(f) return false end
end -- end function
-- ===================================================]]
function FileAccess(FileName) -- Returns true if file is available for update.
if (not(os.rename(FileName, FileName))) then
StatusMessage("Error", FileName, "The Gadget cannot access the ".. FileName ..
" The OS has blocked write access. " ..
"Verify the full path is correct and No application has the file open. ", "(1405)")
return false
else
return true
end -- if end
end -- function end
-- =====================================================]]
function isdir(path) -- Returns true if path is found
local function exists(file)
local ok, err, code = os.rename(file, file)
if not ok then
if code == 13 then
return true
end
end
return ok, err
end
return exists(path.."/")
end
-- =====================================================]]
function Sheetlabel(Wpt, xTextHeight, xThickness, xType, YY) -- Constructs sheet label
local pt1Text = Point2D()
local Pang = 0.0
local Tang = 0.0
if YY then
pt1Text = Polar2D(Polar2D(Wpt, 90.0, YY), 90.0, 6.0 * JimAndi.Cal)
Pang = 270.0
Tang = 0.0
else
if Material.Orientation == "V" then
pt1Text = Polar2D(Wpt, 90.0, Milling.MaterialBlockWidth + (4.0 * JimAndi.Cal))
else
pt1Text = Polar2D(Wpt, 90.0, Milling.MaterialBlockHeight + (4.0 * JimAndi.Cal))
end
Pang = 270.0
Tang = 0.0
end
DrawWriter(Project.ProgramName, pt1Text, Milling.TextHeight * 3.0, JimAndi.LNDrawNotes, Tang)
pt1Text = Polar2D(pt1Text, Pang, Milling.TextHeight * 3.35)
DrawWriter("Cabinet ID: " .. Project.DrawerID, pt1Text, JimAndi.TextHeight * 2.0, JimAndi.LNDrawNotes, Tang)
pt1Text = Polar2D(pt1Text, Pang, Milling.TextHeight * 2.75)
DrawWriter("Cabinet Name: " .. Project.CabinetName, pt1Text, JimAndi.TextHeight * 2.0, JimAndi.LNDrawNotes, Tang)
pt1Text = Polar2D(pt1Text, Pang, Milling.TextHeight * 2.75)
if xThickness then
DrawWriter("Material: " .. xThickness .. " " .. xType, pt1Text, JimAndi.TextHeight * 2.0, JimAndi.LNDrawNotes, Tang)
end -- if end
end -- function end
-- =====================================================]]
function DiskRights(path) -- Returns true if you have write access to path.
xx = io.open(path, "w")
if xx == nil then
io.close()
return false
else
xx:close()
return true
end
end -- function rights
-- =====================================================]]
end -- FileTools function end
Geometry Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔═╗╔═╗╔═╗╔╦╗╔═╗╔╦╗╦═╗╦ ╦ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ╦║╣ ║ ║║║║║╣ ║ ╠╦╝╚╦╝ ║ ║ ║║ ║║ ╚═╗
╚═╝╚═╝╚═╝╩ ╩╚═╝ ╩ ╩╚═ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function GeometryTools()
-- =====================================================]]
function SheetNew() -- Adds a new sheet to the drawing
if GetVersion() >= 10.5 then then
local layer_manager = Milling.job.LayerManager
-- get current sheet count - note sheet 0 the default sheet counts as one sheet
local orig_num_sheets = layer_manager.NumberOfSheets
-- get current active sheet index
local orig_active_sheet_index = layer_manager.ActiveSheetIndex
-- set active sheet to last sheet
local num_sheets = layer_manager.NumberOfSheets
layer_manager.ActiveSheetIndex = num_sheets - 1
-- Add a new sheet
layer_manager:AddNewSheet()
-- set active sheet to last sheet we just added
num_sheets = layer_manager.NumberOfSheets
layer_manager.ActiveSheetIndex = num_sheets - 1
Milling.job:Refresh2DView()
end -- if end
return true
end
-- =====================================================]]
function GetDiameterAndCentre(cadcontour, point2d)
local contour = cadcontour:GetContour()
local arc = contour:GetFirstSpan()
local point3d = Point3D();
arc = CastSpanToArcSpan(arc)
local diameter = arc:RadiusAndCentre(point3d) * 2.0
point2d = Point2D(point3d.x, point3d.y)
-- MessageBox("Diameter = " .. diameter)
return diameter, point2d
end
-- =====================================================]]
function IsCircle(cadcontour) -- Returns True if conture is a circle
local contour = cadcontour:GetContour()
-- Does it consist only of arcs?
if contour.ContainsBeziers then
return false
end
if not contour.ContainsArcs then
return false
end
-- Does is contain 4 contours?
if contour.Count ~= 4 then
return false;
end
-- Check the arcs end and initial points make a square.
local arcs = {}
local count = 1;
local pos = contour:GetHeadPosition()
local object
while pos ~= nil do
object, pos = contour:GetNext(pos)
arcs[count] = object
count = count + 1
end
local x_1 =(arcs[1]).StartPoint2D.x
local y_1 =(arcs[1]).StartPoint2D.y
local x_3 =(arcs[3]).StartPoint2D.x
local y_3 =(arcs[3]).StartPoint2D.y
local x_2 =(arcs[2]).StartPoint2D.x
local y_2 =(arcs[2]).StartPoint2D.y
local x_4 =(arcs[4]).StartPoint2D.x
local y_4 =(arcs[4]).StartPoint2D.y
local horizontal_distance = (x_1 - x_3)*(x_1 - x_3) + (y_1 - y_3)*(y_1 - y_3)
local vertical_distance = (x_4 - x_2)*(x_4 - x_2) + (y_2 - y_4)*(y_2 - y_4)
if math.abs(horizontal_distance - vertical_distance) > 0.04 then
return false
end
-- Check the bulge factor is 90
local bulge = 0;
for _, arc_span in ipairs(arcs) do
bulge = CastSpanToArcSpan(arc_span).Bulge;
if math.abs(math.abs(bulge) - g_bulge90) > 0.04 then
return false
end
end
return true
end
-- =====================================================]]
function SheetSet(Name) -- Move focus to a named sheet
local job = VectricJob()
local sheet_manager = job.SheetManager
local sheet_ids = sheet_manager:GetSheetIds()
for id in sheet_ids do
if(sheet_manager:GetSheetName(id) == Name) then
sheet_manager.ActiveSheetId = id
end
end
end
-- ====================================================]]
function SheetNextSize(X, Y) -- Make New Sheet to size (x, y)
if X == nil then
X = Milling.MaterialBlockWidth
else
X = X + (2 * Milling.Cal)
end
if Y == nil then
Y = Milling.MaterialBlockHeight
else
Y = Y + (2 * Milling.Cal)
end
Milling.Sheet = Milling.Sheet + 1
local sheet_manager = Milling.job.SheetManager
local sheet_ids = sheet_manager:GetSheetIds()
for id in sheet_ids do
if(sheet_manager:GetSheetName(id) == "Sheet 1") then
sheet_manager:CreateSheets(1, id, Box2D(Point2D(0, 0), Point2D(X, Y)))
end
end
SheetSet("Sheet " .. tostring(Milling.Sheet))
return true
end
-- =====================================================]]
function GetPolarAngle(Start, Corner, End) -- Returns the Polar Angle
local function GetPolarDirection(point1, point2) --
local ang = math.abs(math.deg(math.atan((point2.Y - point1.Y) / (point2.X - point1.X))))
if point1.X < point2.X then
if point1.Y < point2.Y then
ang = ang + 0.0
else
ang = 360.0 - ang
end -- if end
else
if point1.Y < point2.Y then
ang = 180.0 - ang
else
ang = ang + 180.0
end -- if end
end -- if end
if ang >=360 then
ang = ang -360.0
end -- if end
return ang
end -- function end
return math.abs(GetPolarDirection(Corner, Start) - GetPolarDirection(Corner, End))
end -- function end
-- =====================================================]]
function GetOrientation(point1, point2) -- Orientation of left, right, up or down
if DecimalPlaces(point1.X,8) == DecimalPlaces(point2.X,8) then
if point1.Y < point2.Y then
return 90.0
else
return 270.0
end
elseif DecimalPlaces(point1.Y,8) == DecimalPlaces(point2.Y,8) then
if point1.X < point2.X then
return 0.0
else
return 180.0
end
else
return nil
end
end -- function end
-- =====================================================]]
function GetPolarDirection(point1, point2) -- Retuens and amgle from two points
local ang = math.abs(math.deg(math.atan((point2.Y - point1.Y) / (point2.X - point1.X))))
if point1.X < point2.X then
if point1.Y < point2.Y then
ang = ang + 0.0
else
ang = 360.0 - ang
end -- if end
else
if point1.Y < point2.Y then
ang = 180.0 - ang
else
ang = ang + 180.0
end -- if end
end -- if end
if ang >=360 then
ang = ang -360.0
end -- if end
return ang
end -- function end
-- =====================================================]]
function CenterArc(A, B, RadiusD) -- Retuns 2DPoint from Arc point and Radius
local radius = ((tonumber(RadiusD) or 0) * g_var.scl)
local horda = (A - B).Length
if math.abs(radius) < (horda / 2) and radius ~= 0 then
--D("Too small radius " .. radius .. "\nreplaced by the smallest possible " .. (horda / 2))
radius = (horda / 2)
end
return Point2D(((A.x + B.x) / 2 + (B.y - A.y) * math.sqrt(math.abs(radius) ^ 2 - (horda / 2) ^ 2) / horda), ((A.y + B.y) / 2 + (A.x - B.x) * math.sqrt(math.abs(radius) ^ 2 - (horda / 2) ^ 2) / horda))
end
-- =====================================================]]
function Polar2D(pt, ang, dis) -- Retuns 2DPoint from Known Point, Angle direction, and Projected distance.
-- The Polar2D function will calculate a new point in space based on a Point of reference, Angle of direction, and Projected distance.
-- ::''Returns a 2Dpoint(x, y)''
return Point2D((pt.X + dis * math.cos(math.rad(ang))), (pt.Y + dis * math.sin(math.rad(ang))))
end -- End Function
-- =====================================================]]
function GetDistance(objA, objB) -- Returns Double from two Points
local xDist = objB.x - objA.x
local yDist = objB.y - objA.y
return math.sqrt((xDist ^ 2) + (yDist ^ 2))
end -- function end
-- =====================================================]]
function GetAngle(point1, point2)
local ang = math.abs(math.deg(math.atan((point2.Y - point1.Y) / (point2.X - point1.X))))
if point1.X < point2.X then
if point1.Y < point2.Y then
ang = ang + 0.0
else
ang = 360.0 - ang
end -- if end
else
if point1.Y < point2.Y then
ang = 180.0 - ang
else
ang = ang + 180.0
end -- if end
end -- if end
if ang >=360.0 then
ang = ang -360.0
end -- if end
return ang
end -- function end
-- =====================================================]]
function Arc2Bulge(p1, p2, Rad) -- Returns the Bulge factor for an arc
local chord = math.sqrt(((p2.x - p1.x) ^ 2) + ((p2.y - p1.y) ^ 2))
local seg = (Rad - (0.5 * (math.sqrt((4.0 * Rad^2) - chord^2))))
local bulge = (2 * seg) / chord
return bulge
end -- function end
-- =====================================================]]
function TrigIt() -- Calulates Right Angle
-- ==Trig Function==
-- VECTRIC LUA SCRIPT
-- =====================================================]]
-- Gadgets are an entirely optional add-in to Vectric's core software products.
-- They are provided 'as-is', without any express or implied warranty, and you
-- make use of them entirely at your own risk.
-- In no event will the author(s) or Vectric Ltd. be held liable for any damages
-- arising from their use.
-- Permission is granted to anyone to use this software for any purpose,
-- including commercial applications, and to alter it and redistribute it freely,
-- subject to the following restrictions:
-- 1. The origin of this software must not be misrepresented; you must not
-- claim that you wrote the original software.
-- 2. If you use this software in a product, an acknowledgement in the product
-- documentation would be appreciated but is not required.
-- 3. Altered source versions must be plainly marked as such, and must not be
-- misrepresented as being the original software.
-- 4. This notice may not be removed or altered from any source distribution.
--
-- Right Triangle TrigFunction is written by Jim Anderson of Houston Texas 2020
-- =====================================================]]
-- Code Debugger
-- require("mobdebug").start()
-- =====================================================]]
-- Global Variables --
Trig = {}
-- =====================================================]]
function TrigTest() -- Test the All Right Angle
TrigClear()
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 3.0 -- Rise or (B2C)
Trig.Adj = 4.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 1: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = * " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 0.0 -- Rise or (B2C)
Trig.Adj = 4.0 -- Base or (A2C)
Trig.Hyp = 5.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 2: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = * " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 3.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 5.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 3: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = * " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 36.86897645844
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 3.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 4: \n" ..
" Trig.A = * " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 36.86897645844
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 0.0 -- Rise or (B2C)
Trig.Adj = 4.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 5: \n" ..
" Trig.A = * " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = * " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 36.86897645844
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 0.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 5.0 -- Slope or (A2B)
Trig.Slope = 0.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 6: \n" ..
" Trig.A = * " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = * " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
TrigClear()
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 3.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 9.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test 7: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = * " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.Circumscribing = " .. tostring(Trig.Circumscribing) .. " \n" ..
" Trig.Inscribing = " .. tostring(Trig.Inscribing) .. " \n"
)
-- =====================================================]]
TrigClear()
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 0.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 9.0
Trig.Area = 0.0
Trig.OutRadius = 0.0
Trig.InRadius = 0.0
Trig.Parameter = 0.0
TrigIt()
DisplayMessageBox("Test Error: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = * " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = * " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.Circumscribing = " .. tostring(Trig.Circumscribing) .. " \n" ..
" Trig.Inscribing = " .. tostring(Trig.Inscribing) .. " \n"
)
return true
end -- function end --
-- =====================================================]]
function TrigClear() -- Clears and resets Trig Table
Trig.A = 0.0
Trig.B = 0.0
Trig.C = 90.0
Trig.Opp = 0.0 -- Rise or (B2C)
Trig.Adj = 0.0 -- Base or (A2C)
Trig.Hyp = 0.0 -- Slope or (A2B)
Trig.Slope = 0.0
return true
end -- function end
-- =====================================================]]
local function BSA()
Trig.B = (Trig.C - Trig.A)
Trig.Slope = math.tan(math.rad(Trig.A)) * 12.0
Trig.Area = (Trig.Opp * Trig.Adj) * 0.5
Trig.Inscribing = ((Trig.Opp + Trig.Adj) - Trig.Hyp) * 0.5
Trig.Circumscribing = Trig.Hyp * 0.5
Trig.Parameter = Trig.Opp + Trig.Adj + Trig.Hyp
end
if Trig.A == 0.0 and Trig.B > 0.0 and Trig.Slope == 0.0 then
Trig.A = Trig.C - Trig.B
elseif Trig.A == 0.0 and Trig.B == 0.0 and Trig.Slope > 0.0 then
Trig.A = math.deg(math.atan(Trig.Slope / 12.0))
end -- if end
-- test 4
if (Trig.A > 0.0) and (Trig.Opp > 0.0) then -- A and Rise or (B2C)
Trig.Adj = Trig.Opp / (math.tan(math.rad(Trig.A)))
Trig.Hyp = math.sqrt((Trig.Opp * Trig.Opp ) + ( Trig.Adj * Trig.Adj))
BSA()
return true
-- test 6
elseif (Trig.A > 0.0) and (Trig.Hyp > 0.0) then -- A and Slope or (A2B)
Trig.Adj = math.cos(math.rad(Trig.A)) * Trig.Hyp
Trig.Opp = math.sqrt((Trig.Hyp * Trig.Hyp ) - ( Trig.Adj * Trig.Adj))
BSA()
return true
-- test 5
elseif (Trig.A > 0.0) and (Trig.Adj > 0.0) then -- A and Base or (A2C)
Trig.Opp = math.tan(math.rad(Trig.A)) * Trig.Adj
Trig.Hyp = math.sqrt((Trig.Opp * Trig.Opp ) + ( Trig.Adj * Trig.Adj))
BSA()
return true
-- test 1
elseif (Trig.Opp > 0.0) and (Trig.Adj > 0.0) then -- Rise and Base
Trig.Hyp = math.sqrt((Trig.Opp * Trig.Opp ) + ( Trig.Adj * Trig.Adj))
Trig.A = math.deg(math.atan(Trig.Opp / Trig.Adj))
BSA()
return true
elseif (Trig.Adj > 0.0) and (Trig.Hyp > 0.0) then -- Rise and Slope
-- test 2
Trig.Opp = math.sqrt((Trig.Hyp * Trig.Hyp ) - ( Trig.Adj * Trig.Adj))
Trig.A = math.deg(math.atan(Trig.Opp / Trig.Adj))
BSA()
return true
elseif (Trig.Opp > 0.0) and (Trig.Hyp > 0.0) then -- Base and Slope
-- test 3
Trig.Adj = math.sqrt((Trig.Hyp * Trig.Hyp ) - ( Trig.Opp * Trig.Opp))
Trig.A = math.deg(math.atan(Trig.Opp / Trig.Adj))
BSA()
return true
else
DisplayMessageBox("Error: Trig Values did not match requirements: \n" ..
" Trig.A = " .. tostring(Trig.A) .. " \n" ..
" Trig.B = " .. tostring(Trig.B) .. " \n" ..
" Trig.C = " .. tostring(Trig.C) .. " \n" ..
" Trig.Opp = " .. tostring(Trig.Opp) .. " \n" ..
" Trig.Adj = " .. tostring(Trig.Adj) .. " \n" ..
" Trig.Hyp = " .. tostring(Trig.Hyp) .. " \n" ..
" Trig.Slope = " .. tostring(Trig.Slope) .. " on 12 inch \n" ..
" Trig.Area = " .. tostring(Trig.Area) .. " \n" ..
" Trig.Parameter = " .. tostring(Trig.Parameter) .. " \n" ..
" Trig.OutRadius = " .. tostring(Trig.OutRadius) .. " \n" ..
" Trig.InRadius = " .. tostring(Trig.InRadius) .. " \n"
)
return false
end
end -- function end
-- =====================================================]]
end -- Geometry Tools end
INI File Tools
These functions manipulate the INI files for the storage and retrieval of data.
NameStrip
Convert string to the correct data type.
function NameStrip(str, var) -- convert string to the correct data type -- Local Words = NameStrip("KPSDFKSPSK - 34598923", "-") -- returns "KPSDFKSPSK" if "" == str then DisplayMessageBox("Error in string") else if string.find(str, var) then local j = assert(string.find(str, var) - 1) return All_Trim(string.sub(str, 1, j)) else return str end end end -- function end
HeadStrip
Convert string to the correct data type.
function HeadStrip(str, var) -- convert string to the correct data type -- Local Words = HeadStrip("LastName23 = Smith", "=") -- returns "Smith" if "" == str then DisplayMessageBox("Error in string") else if string.find(str, var) then local j = assert(string.find(str, var) + 1) return All_Trim(string.sub(str, j)) else return str end end end -- function end -- =====================================================]] function INI_AreDupGroups(xPath, xFile) -- Are there duplicate groups local GroupNames = {} local CleanNames = {} local DupGroups = {} GroupNames = INI_ReadGroups(xFile, aName) CleanNames = RemoveDups(GroupNames) if TableLength(GroupNames) == TableLength(CleanNames)then return true else return false end end -- function end -- =====================================================]] function INI_FixDupGroups(xPath, xFile) -- Find and fix duplicate groups local GroupNames = {} local CleanNames = {} local DupGroups = {} GroupNames = INI_ReadGroups(xFile, aName) return true end -- function end -- =====================================================]] function INI_DeleteGroup(xPath, xFile, xGroup) -- Deletes only the first find of xGroup -- Deletes old ini (.bak) file -- Copy's the .ini to a backup (.bak) new file -- Reads the new backup file and writes a new file to the xGroup value -- Stops Writing lines until next Group is found -- Writes to end of file -- Call: DeleteGroup("C:\\Users\\James\\OneDrive\\Documents\\DoorGadget\\Clients\\Marcin", "ProjectList", "Boston") local OfileName = xPath .. "\\" .. xFile .. ".bak" if FileExists(OfileName) then os.remove(OfileName) end local NfileName = xPath .. "\\" .. xFile .. ".ini" -- os.rename(NfileName, OfileName) -- makes backup copy file if CopyFileFromTo(NfileName, OfileName) then local fileR = io.open(OfileName) local fileW = io.open(NfileName, "w") local groups = false local writit = true local MyTxt = "" local txt = "" if fileR and fileW then -- files are open for Line in fileR:lines() do -- read each line of the backup file txt = Line -- copy line from file to txt if All_Trim(Line) == "[" .. All_Trim(xGroup) .. MyTxt .. "]" then -- look for a match groups = true txt = "" end -- if end if groups and MyTxt == "" then -- if group is true turn off the write function writit = false if "[" == string.sub(All_Trim(txt), 1, 1) then -- turns write function on if next group is found groups = false xGroup = "-" writit = true MyTxt = "--" else writit = false end -- if end end -- if end if writit then fileW:write(txt .. "\n") txt = "" end -- if end end -- for end os.remove(OfileName) end -- if end if fileR then fileR:close() end if fileW then fileW:close() end end return true end -- function end -- =====================================================]] function INI_RenameGroup(xOldGroup, xNewGroup) -- Renames a group --Deletes old ini Hardware.bak file --Copys the ini file to a backup copy file --Reads the backup file and writes a new ini file to the xGroup --Writes new file with new group to the new ini file local NfileName = Project.AppPath .. "\\" .. "EasyDrawerHardware" .. ".ini" local OfileName = Project.AppPath .. "\\" .. "EasyDrawerHardware" .. ".bak" os.remove(OfileName) CopyFileFromTo(NfileName, OfileName) -- makes backup file local fileR = io.open(OfileName) local fileW = io.open(NfileName, "w") if fileR and fileW then local groups = false local txt = "" for Line in fileR:lines() do if All_Trim(Line) == "[" .. All_Trim(xOldGroup) .. txt .. "]" then -- Group fileW:write(xNewGroup .. "\n") txt = "-" else fileW:write(Line .. "\n") end -- if end end -- for end fileR:close() fileW:close() os.remove(OfileName) end -- if end return true end -- function end -- =====================================================]] function INI_DeleteItem(xPath, xFile, xGroup, xItem) -- Deletes old ini (.bak) file -- Copys the .ini to a backup (.bak) new file -- Reads the new backup file and writes a new file to the xGroup value -- Stops Writing lines until next Group is found -- Writes to end of file -- DeleteGroup("C:\\Users\\James\\OneDrive\\Documents\\DoorGadget\\Clients\\Marcin", "ProjectList", "Boston") local NfileName = xPath .. "\\" .. xFile .. ".ini" local OfileName = xPath .. "\\" .. xFile .. ".bak" os.remove(OfileName) CopyFileFromTo(NfileName, OfileName) -- makes backup copy file local fileR = io.open(OfileName) local fileW = io.open(NfileName, "w") if fileR and fileW then local groups = false local writit = true local txt = "" for Line in fileR:lines() do txt = Line if All_Trim(Line) == "[" .. All_Trim(xGroup) .. "]" then groups = true end -- if end if groups then -- =================== if xItem == string.sub(Line, 1, string.len(xItem)) then -- Item writit = false groups = false end -- if end end -- if end -- =================== if writit then fileW:write(txt .. "\n") end -- if end writit = true end -- for end os.remove(OfileName) fileR:close() fileW:close() end -- if end return true end -- function end -- =======================================================]] function INI_ValidateGroup(xFile, xGroup) -- Reads INI file and returns true if group is found -- Reads INI file and returns true if the group is found local fileR = io.open(xFile) local group = false for Line in fileR:lines() do if string.upper(All_Trim(Line)) == "[" .. string.upper(All_Trim(xGroup)) .. "]" then -- Group group = true break end -- if end end -- for end fileR:close() return group end -- function end -- =======================================================]] function INI_ValidateItem(xFile, xGroup, xItem) -- Reads INI file and returns true if group and item is found local fileR = io.open(xFile) if fileR then local group = false local item = false local ItemLen = string.len(xItem) for Line in fileR:lines() do if All_Trim(Line) == "[" .. string.upper(All_Trim(xGroup)) .. "]" then -- Group group = true end -- if end if group then if string.upper(xItem) == string.upper(string.sub(Line, 1, string.len(xItem))) then -- Item item = true break end -- if end end -- if end end -- for end fileR:close() end -- if end return group end -- function end -- =====================================================]] function INI_StrValue(str, ty) -- Convert string to the correct data type if nil == str then DisplayMessageBox("Error in Ini file - looking for a " .. ty .. " value") else if "" == All_Trim(str) then DisplayMessageBox("Error in Ini file - looking for a " .. ty .. " value") else local j = (string.find(str, "=") + 1) if ty == "D" then -- Double return tonumber(string.sub(str, j)) end -- if end if ty == "I" then -- Intiger return math.floor(tonumber(string.sub(str, j))) end -- if end if ty == "S" then -- String return All_Trim(string.sub(str, j)) end -- if end if ty == "B" then -- Bool if "TRUE" == All_Trim(string.sub(str, j)) then return true else return false end -- if end end -- if end end -- if end end -- if end return nil end -- function end -- =====================================================]] function INI_GetValue(xPath, FileName, GroupName, ItemName, ValueType) -- ==INI_GetValue(xPath, FileName, GroupName, ItemName, ValueType)== -- Returns a value from a file, group, and Item -- Usage: XX.YY = GetIniValue("C:/temp", "ScrewDia", "[Screws]", "Diameter", "D") local filenameR = xPath .. "\\" .. FileName .. ".ini" local FL = LengthOfFile(filenameR) local file = io.open(filenameR, "r") local dat = "." local ItemNameLen = string.len(ItemName) if file then while (FL >= 1) do dat = string.upper(All_Trim(file:read())) if dat == "[" .. string.upper(GroupName) .. "]" then break else FL = FL - 1 end -- if end end -- while end while (FL >= 1) do dat = string.upper(All_Trim(file:read())) if string.upper(ItemName) == string.sub(dat, 1, ItemNameLen) then break else FL = FL - 1 if FL == 0 then dat = "Error - item not found" break end -- if end end -- if end end -- while end file:close()-- closes the open file end -- if end local XX = StrIniValue(dat, ValueType) return XX end -- function end -- =====================================================]] function INI_GetIDFor(xPath, FileName, GroupName, ItemValue) -- == INI_GetIDFor(xPath, FileName, GroupName, ItemValue) == -- Returns a ItemID from a file, group, and ItemValue -- Usage: XX.YY = INI_GetIDFor("C:/temp", "UserList", "[Users]", "Anderson") -- returns: "UserLastName22" local filenameR = xPath .. "\\" .. FileName .. ".ini" local FL = LengthOfFile(filenameR) local file = io.open(filenameR, "r") if file then local dat = "." local ItemValueLen = string.len(ItemValue) while (FL >= 1) do dat = string.upper(All_Trim(file:read())) if dat == "[" .. string.upper(GroupName) .. "]" then break else FL = FL - 1 end -- if end end -- while end while (FL >= 1) do dat = string.upper(All_Trim(file:read())) if string.upper(ItemValue) == HeadStrip(dat, "=") then break else FL = FL - 1 if FL == 0 then dat = "Error - item not found" break end -- if end end -- if end end -- while end file:close()-- closes the open file end -- if end local XX = NameStrip(dat, "=") return XX end -- function end -- =====================================================]] function INI_ReadGroups(xFile, aName) --[[Reads INI and returns a list contain the [Headers] as Array IniFile = {} Global variables xPath = script_path ]] local filename = xFile local file = io.open(filename, "r") if file then local fLength = (LengthOfFile(filename) - 1) local dat = All_Trim(file:read()) while (fLength >= 1) do if "[" == string.sub(dat, 1, 1) then table.insert (aName, string.sub(dat, 2, -2)) end dat = file:read() if dat then dat = All_Trim(dat) else file:close()-- closes the open file return true end fLength = fLength - 1 end -- while end -- if if file then file:close() end return true end -- =====================================================]] function INI_ProjectHeaderReader(xPath) -- ==ProjectHeaderReader(xPath)== -- Gets the INI Header values of a ini file and uploads to "IniFile" Array --[[ Gets the INI Header values of a ini file and uploads to "IniFile" Array IniFile = {} Global variables xPath = script_path ]] local filename = xPath .. "/CabinetProjects.ini" local file = io.open(filename, "r") if file then local Cabing = (LengthOfFile(filename) - 1) local dat = All_Trim(file:read()) while (Cabing >= 1) do if "[" == string.sub(dat, 1, 1) then table.insert (Projects, string.sub(dat, 2, -2)) end dat = file:read() if dat then dat = All_Trim(dat) else return true end Cabing = Cabing - 1 end file:close() end return true end -- function end -- =====================================================]] function INI_AddNewProject(xPath, xGroup) -- Appends a New Project to CabinetProjectQuestion.ini -- ==AddNewProject(xPath)== -- Appends a New Project to CabinetProjectQuestion.ini local filename = xPath .. "/ProjectList.ini" local file = io.open(filename, "a") if file then file:write("[" .. All_Trim(xGroup) .. "] \n") file:write("load_date = " .. StartDate(true) .. " \n") file:write("#====================================== \n") file:close()-- closes the open file end return true end -- function end -- =====================================================]] function INI_StdHeaderReader(xPath, Fname) -- ==StdHeaderReader(xPath, Fname)== -- Gets the INI Header values of a ini file and uploads to "IniFile" Array --[[ Gets the INI Header values of a ini file and uploads to "IniFile" Array IniFile = {} Global variables xPath = script_path ]] local filename = xPath .. "\\" .. Fname .. ".ini" local file = io.open(filename, "r") if file then local WallMilling = (LengthOfFile(filename) - 1) local dat = All_Trim(file:read()) while (WallMilling >= 0) do if "[" == string.sub(dat, 1, 1) then table.insert (IniFile, string.sub(dat, 2, -2)) end -- if end dat = file:read() if dat then dat = All_Trim(dat) else return true end -- if end WallMilling = WallMilling - 1 end -- while end file:close() end return true end -- function end -- =====================================================]] function INI_ReadProjectinfo(Table, xPath, xGroup, xFile) -- ProjectQuestion = {} -- ==ReadProjectinfo(xPath, xGroup, xFile)== -- Reads an ini files group and sets the table.names Table.ProjectContactEmail = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.ProjectContactEmail", "S") Table.ProjectContactName = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.ProjectContactName", "S") Table.ProjectContactPhoneNumber = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.ProjectContactPhoneNumber", "S") Table.ProjectName = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.ProjectName", "S") Table.ProjectPath = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.ProjectPath", "S") Table.StartDate = GetIniValue(xPath, xFile, xGroup, "ProjectQuestion.StartDate", "S") return true end -- function end -- =====================================================]] function INI_UpdateItem(xPath, xFile, xGroup, xItem, xValue) -- Deletes old ini (.bak) file -- Copys the .ini to a backup (.bak) new file -- Reads the new backup file and writes a new file to the xGroup -- Writes new xValue for the for the xItem -- Reads and writes a new file to end of file local NfileName = xPath .. "\\" .. xFile .. ".ini" local OfileName = xPath .. "\\" .. xFile .. ".bak" os.remove(OfileName) if CopyFileFromTo(NfileName, OfileName) then-- makes backup file local fileR = io.open(OfileName) local fileW = io.open(NfileName, "w") if fileR and fileW then local groups = false local txt = "" for Line in fileR:lines() do txt = Line if All_Trim(Line) == "[" .. All_Trim(xGroup) .. "]" then -- Group groups = true end -- if end if xItem == string.sub(Line, 1, string.len(xItem)) then -- Item if groups then txt = xItem .. " = " .. xValue groups = false end -- if end end -- if end fileW:write(txt .. "\n") txt = "" end -- for end os.remove(OfileName) fileR:close() fileW:close() end end return true end -- function end -- =====================================================]] function INI_ReadProject(xPath, xFile, xGroup) -- Milling = {} Milling.LayerNameBackPocket = GetIniValue(xPath, xFile, xGroup, "Milling.LayerNameBackPocket", "S") Milling.LayerNameTopBottomCenterDado = GetIniValue(xPath, xFile, xGroup, "Milling.LayerNameTopBottomCenterDado", "S") Milling.LayerNameDrawNotes = GetIniValue(xPath, xFile, xGroup, "Milling.LayerNameDrawNotes", "S") Milling.LayerNameDrawFaceFrame = GetIniValue(xPath, xFile, xGroup, "Milling.LayerNameDrawFaceFrame", "S") Milling.BackPocketDepthWall = GetIniValue(xPath, xFile, xGroup, "Milling.BackPocketDepthWall", "N") Milling.BlindDadoSetbackWall = GetIniValue(xPath, xFile, xGroup, "Milling.BlindDadoSetbackWall", "N") Milling.CabDepthWall = GetIniValue(xPath, xFile, xGroup, "Milling.CabDepthWall", "N") return true end -- function end -- =====================================================]] function INI_TestDeleteDups() --[[ Requires 3 global variables clean = {} dups = {} Names = {} ]] local myPath = "C:\\Users\\CNC\\Documents\\test" local myName = "Tester" local myfile = "C:\\Users\\CNC\\Documents\\test\\Tester.ini" INI_ReadGroups(myfile, Names) FindDups(Names, dups, clean) for i,v in ipairs(dups) do INI_DeleteGroup(myPath, myName, v) end return true -- =====================================================]] end -- INI_Tools() -- =====================================================]] end -- INI Tools end
Data Import Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╔═╗╔╦╗╔═╗ ╦╔╦╗╔═╗╔═╗╦═╗╔╦╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║╠═╣ ║ ╠═╣ ║║║║╠═╝║ ║╠╦╝ ║ ║ ║ ║║ ║║ ╚═╗
═╩╝╩ ╩ ╩ ╩ ╩ ╩╩ ╩╩ ╚═╝╩╚═ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function ImportTools()
-- =====================================================]]
function Read_CSV(xFile, Header)
--Read_CSV(Door.CSVFile, true)
local fileR = io.open(xFile)
local xLine = ""
local result = {}
if fileR then
for Line in fileR:lines() do
xLine = Line
if Header then
Header = false
else
xLine = All_Trim(Line)
for match in (xLine..","):gmatch("(.-)"..",") do
table.insert(result, match)
end -- for end
Door.Count = tonumber(result[1])
Door.Height = tonumber(result[2])
Door.Width = tonumber(result[3])
result = {}
while Door.Count > 0 do
if Door.Style == StyleA.Name then
DoorStyleA()
elseif Door.Style == StyleB.Name then
DoorStyleB()
elseif Door.Style == StyleC.Name then
DoorStyleC()
elseif Door.Style == StyleE.Name then
DoorStyleE()
elseif Door.Style == StyleF.Name then
DoorStyleF()
elseif Door.Style == StyleG.Name then
DoorStyleG()
else
DisplayMessageBox("No Style Select!")
end --if end
Door.Count = Door.Count - 1
end -- for end
end --if end
Door.Record = Door.Record + 1
MyProgressBar:SetPercentProgress(ProgressAmount(Door.Record))
end --for end
end --if end
return true
end -- function end
-- =====================================================]]
end -- ImportTools function end
Job Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╦╔═╗╔╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║ ║╠╩╗ ║ ║ ║║ ║║ ╚═╗
╚╝╚═╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function JobTools()
-- =====================================================]]
function ValidJob()
-- A better error message
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: Cannot run Gadget, no drawing found \n" ..
"Please create a new file (drawing) and \n" ..
"specify the material dimensions \n"
)
return false
else
return true
end -- if end
end -- ValidJob end
-- =====================================================]]
function MoveSetectedVectors(job, NewBasePoint)
local Selection = job.Selection
if Selection.IsEmpty then
MessageBox("LayoutImportedVectors: No vectors selected!")
return false
end
local MySelection = Selection:GetBoundingBox();
if not NewBasePoint then
NewBasePoint = Point2D(0,0)
end
local MyNewLocatioin = BasePoint - MySelection.BLC
local Txform = TranslationMatrix2D(MyNewLocatioin)
Selection:Transform(Txform)
return true
end
-- =====================================================]]
function FixPath(path) -- Lua Returns a fixed path
return path:gsub("%\\", "/")
end -- function end
-- =====================================================]]
function FixPath(myPath) { -- JavaScript Tool Returns a fixed path
/* myPath = "C:\\User\\Bob\\Home\\Drawings"; */
/* NewPath = "C:/User/Bob/Home/Drawings"; */
var NewPath = "";
var myLetter = "";
var CheckPathLen = myPath.length;
for (let i = 0; i < myPath.length; i++) {
myLetter = myPath.charAt(i)
if myLetter.charCodeAt(0) == 92 {
NewPath = NewPath + "/";
} else {
NewPath = NewPath + myLetter;
}
}
return NewPath;
}
-- =====================================================]]
function GetUnits(UTable) -- returns Drawing Units data
local mtl_block = MaterialBlock()
if mtl_block.InMM then
UTable.Units = "Drawing Units: mm"
UTable.Unit = true
UTable.UnitCheck = {"metric", "kilometer", "kilometers", "kh", "meter", "meters", "m", "decimeter", "decimeters", "dm", "centimeter", "centimeters", "cm", "millimeter", "millimeters", "mm"}
UTable.Cal = 25.4
else
UTable.Units = "Drawing Units: inches"
UTable.Unit = false
UTable.UnitCheck = {"imperial", "miles", "mile", "mi", "yards", "yard", "yd", "feet", "foot", "ft", "inches", "inch", "in", "fractions", "fraction"}
UTable.Cal = 1.0
end
return true
end -- end function
-- =====================================================]]
function CheckTheUnits(UTable, Value) -- Checks if the unit of messure in of drawing units
local goodtogo = false
for i=1, #UTable.UnitCheck do
if string.upper(Value) == string.upper(UTable.UnitCheck[i]) then
goodtogo = true
break
end -- if end
end -- for end
if goodtogo then
return true
else
return false
end -- if end
end -- function end
-- =====================================================]]
function GetMatlBlk(Table)
local mtl_block = MaterialBlock()
if mtl_block.InMM then
Table.Units = "Drawing Units: mm"
Table.Unit = true
else
Table.Units = "Drawing Units: inches"
Table.Unit = false
end
if mtl_block.Width> mtl_block.Height then
Table.MaterialThickness = mtl_block.Height
Table.MaterialLength = mtl_block.Width
Table.Orantation = "H"
else
Table.MaterialThickness = mtl_block.Width
Table.MaterialLength = mtl_block.Height
Table.Orantation = "V"
end
Table.FrontThickness = Dovetail.MaterialThickness
Table.SideThickness = Dovetail.MaterialThickness
if mtl_block.Height == mtl_block.Width then
MessageBox("Error! Material block cannot square")
end
return true
end -- end function
-- =====================================================]]
function GetBoxJointMaterialSettings(Table)
local mtl_block = MaterialBlock()
--local units
if mtl_block.InMM then
Table.Units = "Drawing Units: mm"
Table.Unit = true
else
Table.Units = "Drawing Units: inches"
Table.Unit = false
end
if mtl_block.Width > mtl_block.Height then
Table.MaterialThickness = mtl_block.Height
Table.MaterialLength = mtl_block.Width
Table.Orantation = "H"
else
Table.MaterialThickness = mtl_block.Width
Table.MaterialLength = mtl_block.Height
Table.Orantation = "V"
end
if mtl_block.Height == mtl_block.Width then
MessageBox("Error! Material block cannot square")
end
-- Display material XY origin
local xy_origin_text = "invalid"
local xy_origin = mtl_block.XYOrigin
if xy_origin == MaterialBlock.BLC then
Table.xy_origin_text = "Bottom Left Corner"
if Table.Orantation == "V" then
Table.Direction1 = 90.0
Table.Direction2 = 0.0
Table.Direction3 = 270.0
Table.Direction4 = 180.0
Table.Bulge = 1.0
else
Table.Direction1 = 0.0
Table.Direction2 = 90.0
Table.Direction3 = 180.0
Table.Direction4 = 270.0
Table.Bulge = -1.0
end
elseif xy_origin == MaterialBlock.BRC then
Table.xy_origin_text = "Bottom Right Corner"
if Table.Orantation == "V" then
Table.Direction1 = 90.0
Table.Direction2 = 180.0
Table.Direction3 = 270.0
Table.Direction4 = 0.0
Table.Bulge = -1.0
else
Table.Direction1 = 180.0
Table.Direction2 = 90.0
Table.Direction3 = 0.0
Table.Direction4 = 270.0
Table.Bulge = 1.0
end
elseif xy_origin == MaterialBlock.TRC then
Table.xy_origin_text = "Top Right Corner"
if Table.Orantation == "V" then
Table.Direction1 = 270.0
Table.Direction2 = 180.0
Table.Direction3 = 90.0
Table.Direction4 = 0.0
Table.Bulge = 1.0
else
Table.Direction1 = 180.0
Table.Direction2 = 270.0
Table.Direction3 = 0.0
Table.Direction4 = 90.0
Table.Bulge = -1.0
end
elseif xy_origin == MaterialBlock.TLC then
Table.xy_origin_text = "Top Left Corner"
if Table.Orantation == "V" then
Table.Direction1 = 270.0
Table.Direction2 = 0.0
Table.Direction3 = 90.0
Table.Direction4 = 180.0
Table.Bulge = -1.0
else
Table.Direction1 = 0.0
Table.Direction2 = 270.0
Table.Direction3 = 180.0
Table.Direction4 = 90.0
Table.Bulge = 1.0
end
elseif xy_origin == MaterialBlock.CENTRE then -- NOTE: English spelling for Centre!
Table.xy_origin_text = "Center"
if Table.Orantation == "V" then
Table.Direction1 = 0.0
Table.Direction2 = 0.0
Table.Direction3 = 0.0
Table.Direction4 = 0.0
Table.Bulge = 1.0
else
Table.Direction1 = 0.0
Table.Direction2 = 0.0
Table.Direction3 = 0.0
Table.Direction4 = 0.0
Table.Bulge = -1.0
end
MessageBox("Error! " .. xy_origin_text .. " Must be set at a corner of the Material")
else
Table.xy_origin_text = "Unknown XY origin value!"
MessageBox("Error! " .. xy_origin_text .. " Must be set at a corner of the Material")
if Table.Orantation == "V" then
Table.Direction1 = 0
Table.Direction2 = 0
Table.Direction3 = 0
Table.Direction4 = 0
else
Table.Direction1 = 0
Table.Direction2 = 0
Table.Direction3 = 0
Table.Direction4 = 0
end
end
-- Setup Fingers and Gaps
Table.NoFingers0 = 1 + (Rounder(BoxJoint.MaterialLength / BoxJoint.MaterialThickness, 0))
Table.NoFingers2 = Rounder(BoxJoint.NoFingers0 / 2, 0)
Table.FingerSize = BoxJoint.MaterialLength / BoxJoint.NoFingers0
Table.NoFingers1 = BoxJoint.NoFingers0 - BoxJoint.NoFingers2
return true
end -- function end
-- =====================================================]]
function GetMaterialSettings(Table)
local MaterialBlock = MaterialBlock()
Table.MaterialBlockThickness = MaterialBlock.Thickness
Table.xy_origin = MaterialBlock.XYOrigin
if MaterialBlock.InMM then
Table.Units = "Drawing Units: mm"
Table.Unit = true
Table.Cal = 25.4
else
Table.Units = "Drawing Units: inches"
Table.Unit = false
Table.Cal = 1.0
end
--local units
if MaterialBlock.Width > MaterialBlock.Height then
Table.Orantation = "H" -- Horizontal
elseif MaterialBlock.Width < MaterialBlock.Height then
Table.Orantation = "V" -- Vertical
else
Table.Orantation = "S" -- Squair
end
if Table.xy_origin == MaterialBlock.BLC then
Table.XYorigin = "Bottom Left Corner"
elseif Table.xy_origin == MaterialBlock.BRC then
Table.XYorigin = "Bottom Right Corner"
elseif Table.xy_origin == MaterialBlock.TRC then
Table.XYorigin = "Top Right Corner"
else
Table.XYorigin = "Top Left Corner"
end -- if end
Table.UnitDisplay = "Note: Units: (" .. Table.Units ..")"
return true
end -- end function
-- =====================================================]]
function IsSingleSided(Table)
local SingleSided = Table.job.IsSingleSided
if not SingleSided then
DisplayMessageBox("Error: Job must be a single sided job")
return false
end -- if end
end --IsSingleSided function end
-- =====================================================]]
function IsDoubleSided(Table)
if not Table.job.IsDoubleSided then
DisplayMessageBox("Error: Job must be a Double Sided Project")
return false
else
return true
end -- if end
end-- IsDoubleSided function
-- =====================================================]]
function ShowSetting(Table)
local name = ""
DisplayMessageBox(
name .. " MaterialThickness = " .. tostring(Table.MaterialThickness) .."\n" ..
name .. " BottleRad = " .. tostring(Table.BottleRad) .."\n" ..
name .. " SideLenght = " .. tostring(Table.SideLenght) .."\n" ..
name .. " SideHight = " .. tostring(Table.SideHight) .."\n" ..
name .. " EndLenght = " .. tostring(Table.EndLenght) .."\n" ..
name .. " EndHight = " .. tostring(Table.EndHight) .."\n" ..
name .. " TopLenght = " .. tostring(Table.TopLenght) .."\n" ..
name .. " TopWidht = " .. tostring(Table.TopWidht) .."\n" ..
name .. " HandleLenght = " .. tostring(Table.HandleLenght) .."\n" ..
name .. " HandleWidht = " .. tostring(Table.HandleWidht) .."\n" ..
name .. " HandleRad = " .. tostring(Table.HandleRad) .."\n" ..
name .. " MillingBitRad = " .. tostring(Table.MillingBitRad) .."\n" ..
"\n")
end -- ShowSettings function end
-- =====================================================]]
function MakeLayers()
local Red, Green, Blue = 0, 0, 0
local function GetColor(str) -- returns color value for a Color Name
local sx = str
local Red = 0
local Green = 0
local Blue = 0
local Colors = {}
Colors.Black = "0,0,0"
Colors.Red = "255,0,0"
Colors.Blue = "0,0,255"
Colors.Yellow = "255,255,0"
Colors.Cyan = "0,255,255"
Colors.Magenta = "255,0,255"
Colors.Green = "0,128,0"
if "" == str then
DisplayMessageBox("Error: Empty string passed")
else
str = Colors[str]
if "string" == type(str) then
if string.find(str, ",") then
Red = tonumber(string.sub(str, 1, assert(string.find(str, ",") - 1)))
str = string.sub(str, assert(string.find(str, ",") + 1))
Green = tonumber(string.sub(str, 1, assert(string.find(str, ",") - 1)))
Blue = tonumber(string.sub(str, assert(string.find(str, ",") + 1)))
end
else
DisplayMessageBox("Error: Color " .. sx .. " not Found" )
Red = 0
Green = 0
Blue = 0
end
end
return Red, Green, Blue
end
local layer = Milling.job.LayerManager:GetLayerWithName(Milling.LNBackPocket)
Red, Green, Blue = GetColor(Milling.LNBackPocketColor)
layer:SetColor (Red, Green, Blue)
layer = Milling.job.LayerManager:GetLayerWithName(Milling.LNBackProfile)
Red, Green, Blue = GetColor(Milling.LNBackProfileColor)
layer:SetColor (Red, Green, Blue)
return true
end -- function end
-- =====================================================]]
function MyLayerClear(LayerName)
local Mylayer = Milling.job.LayerManager:GetLayerWithName(LayerName)
if Mylayer.IsEmpty then
Milling.job.LayerManager:RemoveLayer(Mylayer)
end -- if end
return true
end -- function end
-- =====================================================]]
function LayerClear() -- calling MyLayerClear
MyLayerClear(Milling.LNBackPocket .. "-Wall")
MyLayerClear(Milling.LNBackPocket .. "-Base")
MyLayerClear(Milling.LNBackProfile .. "-Wall")
MyLayerClear(Milling.LNBackProfile .. "-Base")
MyLayerClear("PartLabels")
return true
end -- function end
-- =====================================================]]
-- =====================================================]]
end -- Job Tools end
Logic and Test Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╦ ╔═╗╔═╗╦╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ║ ║║ ╦║║ ║ ║ ║║ ║║ ╚═╗
╩═╝╚═╝╚═╝╩╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function LogicTools()
-- =====================================================]]
function DialogStringChecks()
local MyTrue = false
if Milling.LNBottomProfile == "" then
MessageBox("Error: Bottom Profile layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNSideProfile == "" then
MessageBox("Error: Side Profile layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNSidePocket == "" then
MessageBox("Error: Side Pocket layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNFrontProfile == "" then
MessageBox("Error: Front Profile layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNFrontPocket == "" then
MessageBox("Error: Front Pocket layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNBackProfile == "" then
MessageBox("Error: Back Profile layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNBackPocket == "" then
MessageBox("Error: Back Pocket layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNDrawNotes == "" then
MessageBox("Error: Draw Notes layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNPartLabels == "" then
MessageBox("Error: Part Lables layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Milling.LNBlume == "" then
MessageBox("Error: Blume layer name cannot be blank")
OnLuaButton_InquiryLayers()
elseif Project.ProjectName == "" then
MessageBox("Error: Project Name cannot be blank")
OnLuaButton_InquiryProjectInfo()
elseif Project.ContactEmail == "" then
MessageBox("Error: Contact Email cannot be blank")
OnLuaButton_InquiryProjectInfo()
elseif Project.ContactName == "" then
MessageBox("Error: Contact Name cannot be blank")
OnLuaButton_InquiryProjectInfo()
elseif Project.ContactPhoneNumber == "" then
MessageBox("Error: Project Name cannot be blank")
OnLuaButton_InquiryProjectInfo()
elseif Project.DrawerID == "" then
MessageBox("Error: Contact Phone Number cannot be blank")
OnLuaButton_InquiryProjectInfo()
elseif Project.ProjectPath == "" then
MessageBox("Error: Project Path cannot be blank")
OnLuaButton_InquiryProjectInfo()
else
MyTrue = true
end -- if end
return MyTrue
end -- function end
-- =====================================================]]
function CheckNumber(num)
if type(num) == "number" then
return true
else
return false
end -- if end
end -- function end
-- =====================================================]]
function AboveZero(num)
if (type(num) == "number") and (num > 0.0)then
return true
else
return false
end -- if end
end -- function end
-- =====================================================]]
end -- LogicTools function end
File Logging Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╦ ╔═╗╔═╗╔═╗╦╔╗╔╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
║ ║ ║║ ╦║ ╦║║║║║ ╦ ║ ║ ║║ ║║ ╚═╗
╩═╝╚═╝╚═╝╚═╝╩╝╚╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function LoggingTools()
-- =====================================================]]
function LogWriter(xPath, xFile, xText)
-- Writes new xText Line to a log file
local LogName = xPath .. "\\" .. xFile .. ".txt"
local fileW = io.open(LogName, "a")
if fileW then
fileW:write(xText .. "\n")
fileW:close()
end
return true
end -- function end
-- =====================================================]]
function LogWriter(LogName, xText)
-- Adds a new xText Line to a app log file
-- local LogName = Door.CSVPath .. "\\" .. Door.RuntimeLog .. ".txt"
local fileW = io.open(LogName, "a")
if fileW then
fileW:write(xText .. "\n")
fileW:close()
end -- if end
Maindialog:UpdateLabelField("Door.Alert", "Note: Errors are logged in the CSF file folder.")
return true
end -- function end
-- =====================================================]]
end -- Logging Tools Function End
Math Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╔═╗╔╦╗╦ ╦ ╔╦╗╔═╗╔═╗╦ ╔═╗
║║║╠═╣ ║ ╠═╣ ║ ║ ║║ ║║ ╚═╗
╩ ╩╩ ╩ ╩ ╩ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function MathTools()
-- =====================================================]]
function ArcSegment (p1, p2, Rad) -- Returns the Arc Segment
local chord = math.sqrt(((p2.x - p1.x) ^ 2) + ((p2.y - p1.y) ^ 2))
local segment = (Rad - (0.5 * (math.sqrt((4.0 * Rad^2) - chord^2))))
return segment
end -- function end
-- =====================================================]]
function D(x) -- Returns double the value
return x * 2.0
end -- function end
-- =====================================================]]
function H(x) -- Returns half the value
return x * 0.5
end -- function end
-- =====================================================]]
function C(x) -- Returns scale value
return x * Project.Cal
end -- function end
-- =====================================================]]
function ChordSag2Radius (Chr, Seg) -- Returns the Rad from Chord and Seg
local rad = ((((Chr * Chr)/(Seg * 4)) + Seg) / 2.0)
return rad
end -- function end
-- =====================================================]]
function RadSag2Chord(Rad, Seg) -- Returns the Chord from Rad and Seg
local Ang = 2 * math.acos(1 - (Seg/Rad))
local Chord = (2 * Rad) * math.sin(Ang * 0.5)
return Chord
end -- function end
-- =====================================================]]
function RadChord2Segment (Rad, Chord) -- Returns the Arc Segment from Rad and Chord
local segment = (Rad - (0.5 * (math.sqrt((4.0 * Rad^2) - Chord^2))))
return segment
end -- function end
-- =====================================================]]
function RoundTo(Num, Per) -- Returns the number from
local Head = Num < 0 and math.ceil(Num) or math.floor(Num)
local Tail = Num - Head
local Value = Head + tonumber(string.sub(tostring(Tail), 1, Per + 2))
return Value
end -- function end
-- =====================================================]]
function Round(x)
return x>=0 and math.floor(x+0.5) or math.ceil(x-0.5)
end
-- =====================================================]]
function DecimalPlaces(Dnum, Plac)
return tonumber(string.sub(tostring(Dnum) .. "000000000000000000000000000000000000",1, string.len(tostring(math.floor(Dnum))) + 1 + Plac))
end
-- =====================================================]]
function tointeger( x )
local num = tonumber( x )
return num < 0 and math.ceil( num ) or math.floor( num )
end
-- =====================================================]]
-- ===TrigIt===
-- Finds all 5 properties of a triangle
function TrigIt(A, B, AB, AC, BC)
-- Sub Function to help other functions
-- Call = A, B, AB, AC, BC = Trig(A, B, AB, AC, BC)
-- C is the corner, A = small ang and B is the big angle
-- returns all values
-- A, B = angles
-- C = 90.0 Deg
-- B to C (BC) is Run - Base - adjacent
-- A to C (AC) is Rise - Height - opposite
-- A to B (AB) is Slope - hypotenuse
if (B > 0.0) and (A == 0.0) then
A = math.deg(math.rad(90) - math.rad(B))
end
if (A > 0.0) and (B == 0.0) then
B = math.deg(math.rad(90) - math.rad(A))
end
if (AC > 0.0) and (BC > 0.0) then
AB = math.sqrt((AC ^ 2) + (BC ^ 2))
A = math.deg(math.atan(BC/AC))
B = math.deg(math.rad(90) - math.rad(A))
elseif (AB > 0.0) and (BC > 0.0) then
AB = math.sqrt((AB ^ 2) - (BC ^ 2))
A = math.deg(math.atan(BC/AC))
B = math.deg(math.rad(90) - math.rad(A))
elseif (AB > 0.0) and (AC > 0.0) then
AB = math.sqrt((AB ^ 2) - (AC ^ 2))
A = math.deg(math.atan(BC/AC))
B = math.deg(math.rad(90) - math.rad(A))
elseif (A > 0.0) and (AC > 0.0) then
AB = AC / math.cos(math.rad(A))
BC = AB * math.sin(math.rad(A))
elseif (A > 0.0) and (BC > 0.0) then
AB = BC / math.sin(math.rad(A))
AC = AB * math.cos(math.rad(A))
elseif (A > 0.0) and (AB > 0.0) then
BC = AB * math.sin(math.rad(A))
AC = AB * math.cos(math.rad(A))
else
MessageBox("Error: No Missing Value")
end -- if end
return A, B, AB, AC, BC
end
-- =====================================================]]
function Maximum (a) -- Returns the Max number from an array
-- print(maximum({8,10,23,12,5})) --> 23 3
local mi = 1 -- maximum index
local m = a[mi] -- maximum value
for i,val in ipairs(a) do
if val > m then
mi = i
m = val
end -- if end
end
return m, mi
end -- function end
-- =====================================================]]
function IsEven(IsEven_Number) -- Returns True/False if number is even
if (IsEven_Number % 2 == 0) then
return true
else
return false
end -- if end
end -- function end
-- =====================================================]]
function IsOdd(IsOdd_Number) -- Returns True/False if number is odd
if(IsOdd_Number%2 == 0) then
return false
end -- end if
return true
end -- function end
-- =====================================================]]
end -- Math Tools function End
Registry Read and Write Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╦═╗╔═╗╔═╗╦╔═╗╔╦╗╦═╗╦ ╦ ╔╦╗╔═╗╔═╗╦ ╔═╗
╠╦╝║╣ ║ ╦║╚═╗ ║ ╠╦╝╚╦╝ ║ ║ ║║ ║║ ╚═╗
╩╚═╚═╝╚═╝╩╚═╝ ╩ ╩╚═ ╩ ╩ ╚═╝╚═╝╩═╝╚═╝
function RegistryTools()
-- =====================================================]]
function DocVarChk(Name, Value)
local job = VectricJob()
local document_variable_list = job.DocumentVariables
return document_variable_list:DocumentVariableExists(Name)
end -- function end
-- =====================================================]]
function DocVarGet(Name)
local job = VectricJob()
local document_variable_list = job.DocumentVariables
return document_variable_list:GetDocumentVariable(Name, 0.0)
end -- function end
-- =====================================================]]
function DocVarSet(Name, Value)
local job = VectricJob()
local document_variable_list = job.DocumentVariables
return document_variable_list:SetDocumentVariable(Name, Value)
end -- function end
-- =====================================================]]
function RegistryReadMaterial() -- Read from Registry Material values for LUA Bit
local RegistryRead = Registry("Material")
Milling.SafeZGap = Rounder(RegistryRead:GetString("SafeZGap", "0.500"), 4)
Milling.StartZGap = Rounder(RegistryRead:GetString("StartZGap", "0.500"), 4)
Milling.HomeX = Rounder(RegistryRead:GetString("HomeX", "0.000"), 4)
Milling.HomeY = Rounder(RegistryRead:GetString("HomeY", "0.000"), 4)
Milling.HomeZGap = Rounder(RegistryRead:GetString("HomeZGap", "0.750"), 4)
return true
end -- function end
-- =====================================================]]
function RegistryLastTenFiles(FileName) -- Adds to the top ten Log file list
local Registry = Registry(RegName)
LogFile.File10 = Registry:GetString("LogFile.File09", "No Log Yet" )
LogFile.File09 = Registry:GetString("LogFile.File08", "No Log Yet" )
LogFile.File08 = Registry:GetString("LogFile.File07", "No Log Yet" )
LogFile.File07 = Registry:GetString("LogFile.File06", "No Log Yet" )
LogFile.File06 = Registry:GetString("LogFile.File05", "No Log Yet" )
LogFile.File05 = Registry:GetString("LogFile.File04", "No Log Yet" )
LogFile.File04 = Registry:GetString("LogFile.File03", "No Log Yet" )
LogFile.File03 = Registry:GetString("LogFile.File02", "No Log Yet" )
LogFile.File02 = Registry:GetString("LogFile.File01", "No Log Yet" )
LogFile.File01 = FileName
return FileName
end -- function end
-- =====================================================]]
function RegistryRead() -- Read from Registry values
local RegistryRead = Registry("RegName")
local Yes_No = RegistryRead:GetBool("BaseDim.Yes_No", ture)
local CabHeight = RegistryRead:GetDouble("BaseDim.CabHeight", 35.500)
local CabCount = RegistryRead:GetInt("BaseDim.CabCount", 36)
local Name = RegistryRead:GetString("BaseDim.Name", "Words")
Milling.MillTool1.FeedRate = RegistryRead:GetDouble("Milling.MillTool1.FeedRate", 30.000)
Milling.MillTool1.InMM = RegistryRead:GetBool("Milling.MillTool1.InMM ", false)
Milling.MillTool1.Name = RegistryRead:GetString("Milling.MillTool1.Name", "No Tool Selected")
Milling.MillTool1.BitType = RegistryRead:GetString("Milling.MillTool1.BitType", "END_MILL") -- BALL_NOSE, END_MILL, VBIT
Milling.MillTool1.RateUnits = RegistryRead:GetInt("Milling.MillTool1.RateUnits", 4)
Milling.MillTool1.SpindleSpeed = RegistryRead:GetInt("Milling.MillTool1.SpindleSpeed", 20000)
Milling.MillTool1.ToolNumber = RegistryRead:GetInt("Milling.MillTool1.ToolNumber", 1)
Milling.MillTool1.Stepdown = RegistryRead:GetDouble("Milling.MillTool1.Stepdown", 0.2000)
Milling.MillTool1.Stepover = RegistryRead:GetDouble("Milling.MillTool1.Stepover", 0.0825)
Milling.MillTool1.ToolDia = RegistryRead:GetDouble("Milling.MillTool1.ToolDia", 0.1250)
Milling.MillTool1.PlungeRate = RegistryRead:GetDouble("Milling.MillTool1.PlungeRate", 15.000)
Milling.MillTool2.FeedRate = RegistryRead:GetDouble("Milling.MillTool2.FeedRate", 30.000)
Milling.MillTool2.InMM = RegistryRead:GetBool("Milling.MillTool2.InMM ", false)
Milling.MillTool2.Name = RegistryRead:GetString("Milling.MillTool2.Name", "No Tool Selected")
Milling.MillTool2.BitType = RegistryRead:GetString("Milling.MillTool2.BitType", "BALL_NOSE") -- BALL_NOSE, END_MILL, VBIT
Milling.MillTool2.RateUnits = RegistryRead:GetInt("Milling.MillTool2.RateUnits", 4)
Milling.MillTool2.SpindleSpeed = RegistryRead:GetInt("Milling.MillTool2.SpindleSpeed", 20000)
Milling.MillTool2.ToolNumber = RegistryRead:GetInt("Milling.MillTool2.ToolNumber", 2)
Milling.MillTool2.Stepdown = RegistryRead:GetDouble("Milling.MillTool2.Stepdown", 0.2000)
Milling.MillTool2.Stepover = RegistryRead:GetDouble("Milling.MillTool2.Stepover", 0.0825)
Milling.MillTool2.ToolDia = RegistryRead:GetDouble("Milling.MillTool2.ToolDia", 0.1250)
Milling.MillTool2.PlungeRate = RegistryRead:GetDouble("Milling.MillTool2.PlungeRate", 15.000)
Milling.MillTool3.FeedRate = RegistryRead:GetDouble("Milling.MillTool3.FeedRate", 30.000)
Milling.MillTool3.InMM = RegistryRead:GetBool("Milling.MillTool3.InMM", false)
Milling.MillTool3.Name = RegistryRead:GetString("Milling.MillTool3.Name", "No Tool Selected")
Milling.MillTool3.BitType = RegistryRead:GetString("Milling.MillTool3.BitType", "END_MILL") -- BALL_NOSE, END_MILL, VBIT
Milling.MillTool3.RateUnits = RegistryRead:GetInt("Milling.MillTool3.RateUnits", 4)
Milling.MillTool3.SpindleSpeed = RegistryRead:GetInt("Milling.MillTool3.SpindleSpeed", 20000)
Milling.MillTool3.ToolNumber = RegistryRead:GetInt("Milling.MillTool3.ToolNumber", 3)
Milling.MillTool3.Stepdown = RegistryRead:GetDouble("Milling.MillTool3.Stepdown", 0.2000)
Milling.MillTool3.Stepover = RegistryRead:GetDouble("Milling.MillTool3.Stepover", 0.0825)
Milling.MillTool3.ToolDia = RegistryRead:GetDouble("Milling.MillTool3.ToolDia", 0.1250)
Milling.MillTool3.PlungeRate = RegistryRead:GetDouble("Milling.MillTool3.PlungeRate", 15.000)
Milling.MillTool4.FeedRate = RegistryRead:GetDouble("Milling.MillTool4.FeedRate", 30.000)
Milling.MillTool4.InMM = RegistryRead:GetBool("Milling.MillTool4.InMM ", false)
Milling.MillTool4.Name = RegistryRead:GetString("Milling.MillTool4.Name", "No Tool Selected")
Milling.MillTool4.PlungeRate = RegistryRead:GetDouble("Milling.MillTool4.PlungeRate", 15.000)
Milling.MillTool4.RateUnits = RegistryRead:GetInt("Milling.MillTool4.RateUnits", 4)
Milling.MillTool4.SpindleSpeed = RegistryRead:GetInt("Milling.MillTool4.SpindleSpeed", 20000)
Milling.MillTool4.Stepdown = RegistryRead:GetDouble("Milling.MillTool4.Stepdown", 0.2000)
Milling.MillTool4.Stepover = RegistryRead:GetDouble("Milling.MillTool4.Stepover", 0.0825)
Milling.MillTool4.ToolDia = RegistryRead:GetDouble("Milling.MillTool4.ToolDia", 0.1250)
Milling.MillTool4.ToolNumber = RegistryRead:GetInt("Milling.MillTool4.ToolNumber", 5)
Milling.MillTool5.FeedRate = RegistryRead:GetDouble("Milling.MillTool5.FeedRate", 30.000)
Milling.MillTool5.InMM = RegistryRead:GetBool("Milling.MillTool5.InMM ", false)
Milling.MillTool5.Name = RegistryRead:GetString("Milling.MillTool5.Name", "No Tool Selected")
Milling.MillTool5.PlungeRate = RegistryRead:GetDouble("Milling.MillTool5.PlungeRate", 15.000)
Milling.MillTool5.RateUnits = RegistryRead:GetInt("Milling.MillTool5.RateUnits", 4)
Milling.MillTool5.SpindleSpeed = RegistryRead:GetInt("Milling.MillTool5.SpindleSpeed", 20000)
Milling.MillTool5.Stepdown = RegistryRead:GetDouble("Milling.MillTool5.Stepdown", 0.2000)
Milling.MillTool5.Stepover = RegistryRead:GetDouble("Milling.MillTool5.Stepover", 0.0825)
Milling.MillTool5.ToolDia = RegistryRead:GetDouble("Milling.MillTool5.ToolDia", 0.1250)
Milling.MillTool5.ToolNumber = RegistryRead:GetInt("Milling.MillTool5.ToolNumber", 6)
return true
end -- function end
-- =====================================================]]
function RegistryWrite() -- Write to Registry values
local RegistryWrite = Registry("RegName")
local RegValue
RegValue = RegistryWrite:SetBool("ProjectQuestion.CabinetName", true)
RegValue = RegistryWrite:SetDouble("BaseDim.CabDepth", 23.0000)
RegValue = RegistryWrite:SetInt("BaseDim.CabHeight", 35)
RegValue = RegistryWrite:SetString("BaseDim.CabLength", "Words")
RegValue = RegistryWrite:SetDouble("Milling.MillTool1.FeedRate" , Milling.MillTool1.FeedRate)
RegValue = RegistryWrite:SetBool("Milling.MillTool1.InMM", Milling.MillTool1.InMM)
RegValue = RegistryWrite:SetString("Milling.MillTool1.Name", Milling.MillTool1.Name)
RegValue = RegistryWrite:SetString("Milling.MillTool1.BitType", Milling.MillTool1.BitType)
RegValue = RegistryWrite:SetDouble("Milling.MillTool1.PlungeRate" , Milling.MillTool1.PlungeRate)
RegValue = RegistryWrite:SetInt("Milling.MillTool1.RateUnits", Milling.MillTool1.RateUnits)
RegValue = RegistryWrite:SetInt("Milling.MillTool1.SpindleSpeed", Milling.MillTool1.SpindleSpeed)
RegValue = RegistryWrite:SetDouble("Milling.MillTool1.Stepdown" , Milling.MillTool1.Stepdown)
RegValue = RegistryWrite:SetDouble("Milling.MillTool1.Stepover" , Milling.MillTool1.Stepover)
RegValue = RegistryWrite:SetDouble("Milling.MillTool1.ToolDia" , Milling.MillTool1.ToolDia)
RegValue = RegistryWrite:SetInt("Milling.MillTool1.ToolNumber", Milling.MillTool1.ToolNumber)
RegValue = RegistryWrite:SetDouble("Milling.MillTool2.FeedRate" , Milling.MillTool2.FeedRate)
RegValue = RegistryWrite:SetBool("Milling.MillTool2.InMM", Milling.MillTool2.InMM)
RegValue = RegistryWrite:SetString("Milling.MillTool2.Name", Milling.MillTool2.Name)
RegValue = RegistryWrite:SetString("Milling.MillTool2.BitType", Milling.MillTool2.BitType)
RegValue = RegistryWrite:SetDouble("Milling.MillTool2.PlungeRate" , Milling.MillTool2.PlungeRate)
RegValue = RegistryWrite:SetInt("Milling.MillTool2.RateUnits", Milling.MillTool2.RateUnits)
RegValue = RegistryWrite:SetInt("Milling.MillTool2.SpindleSpeed", Milling.MillTool2.SpindleSpeed)
RegValue = RegistryWrite:SetDouble("Milling.MillTool2.Stepdown" , Milling.MillTool2.Stepdown)
RegValue = RegistryWrite:SetDouble("Milling.MillTool2.Stepover" , Milling.MillTool2.Stepover)
RegValue = RegistryWrite:SetDouble("Milling.MillTool2.ToolDia" , Milling.MillTool2.ToolDia)
RegValue = RegistryWrite:SetInt("Milling.MillTool2.ToolNumber", Milling.MillTool2.ToolNumber)
RegValue = RegistryWrite:SetDouble("Milling.MillTool3.FeedRate" , Milling.MillTool3.FeedRate)
RegValue = RegistryWrite:SetBool("Milling.MillTool3.InMM", Milling.MillTool3.InMM)
RegValue = RegistryWrite:SetString("Milling.MillTool3.Name", Milling.MillTool3.Name)
RegValue = RegistryWrite:SetString("Milling.MillTool3.BitType", Milling.MillTool3.BitType)
RegValue = RegistryWrite:SetDouble("Milling.MillTool3.PlungeRate", Milling.MillTool3.PlungeRate)
RegValue = RegistryWrite:SetInt("Milling.MillTool3.RateUnits", Milling.MillTool3.RateUnits)
RegValue = RegistryWrite:SetInt("Milling.MillTool3.SpindleSpeed", Milling.MillTool3.SpindleSpeed)
RegValue = RegistryWrite:SetDouble("Milling.MillTool3.Stepdown" , Milling.MillTool3.Stepdown)
RegValue = RegistryWrite:SetDouble("Milling.MillTool3.Stepover" , Milling.MillTool3.Stepover)
RegValue = RegistryWrite:SetDouble("Milling.MillTool3.ToolDia" , Milling.MillTool3.ToolDia)
RegValue = RegistryWrite:SetInt("Milling.MillTool3.ToolNumber", Milling.MillTool3.ToolNumber)
RegValue = RegistryWrite:SetDouble("Milling.MillTool4.FeedRate" , Milling.MillTool4.FeedRate)
RegValue = RegistryWrite:SetBool("Milling.MillTool4.InMM", Milling.MillTool4.InMM)
RegValue = RegistryWrite:SetString("Milling.MillTool4.Name", Milling.MillTool4.Name)
RegValue = RegistryWrite:SetDouble("Milling.MillTool4.PlungeRate" , Milling.MillTool4.PlungeRate)
RegValue = RegistryWrite:SetInt("Milling.MillTool4.RateUnits", Milling.MillTool4.RateUnits)
RegValue = RegistryWrite:SetInt("Milling.MillTool4.SpindleSpeed", Milling.MillTool4.SpindleSpeed)
RegValue = RegistryWrite:SetDouble("Milling.MillTool4.Stepdown" , Milling.MillTool4.Stepdown)
RegValue = RegistryWrite:SetDouble("Milling.MillTool4.Stepover" , Milling.MillTool4.Stepover)
RegValue = RegistryWrite:SetDouble("Milling.MillTool4.ToolDia" , Milling.MillTool4.ToolDia)
RegValue = RegistryWrite:SetInt("Milling.MillTool4.ToolNumber", Milling.MillTool4.ToolNumber)
return true
end -- function end
-- =====================================================]]
function REG_CheckRegistryBool() -- Checks Registry for Bool values
local RegistryRead = Registry("RegName")
if RegistryRead:BoolExists("ProjectQuestion.Runtool") then
DisplayMessageBox("Alert: The Runtool value is saved.")
else
DisplayMessageBox("Alert: The Runtool value is not saved.")
end -- if end
return true
end -- function end
-- =====================================================]]
function REG_CheckRegistryDouble() -- Checks Registry for Double values
local RegistryRead = Registry("RegName")
if RegistryRead:DoubleExists("ProjectQuestion.ProjectCost") then
DisplayMessageBox("Alert: The project cost is saved.")
else
DisplayMessageBox("Alert: The Project Cost is not saved.")
end -- if end
return true
end -- function end
-- =====================================================]]
function REG_CheckRegistryInt() -- Checks Registry for Int values
local RegistryRead = Registry("RegName")
if RegistryRead:IntExists("ProjectQuestion.ProjectCount") then
DisplayMessageBox("Alert: The Project Count is saved.")
else
DisplayMessageBox("Alert: The Project Count is not saved.")
end -- if end
return true
end -- function end
-- =====================================================]]
function REG_CheckRegistryString() -- Checks Registry for String values
local RegistryRead = Registry("RegName")
if RegistryRead:StringExists("ProjectQuestion.ProjectPath") then
DisplayMessageBox("Alert: The Project path is saved.")
else
DisplayMessageBox("Alert: The Project path is not saved.")
end
return true
end -- function end
-- =====================================================]]
end -- Registry end
String Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔═╗╔╦╗╦═╗╦╔╗╔╔═╗ ╔╦╗╔═╗╔═╗╦ ╔═╗
╚═╗ ║ ╠╦╝║║║║║ ╦ ║ ║ ║║ ║║ ╚═╗
╚═╝ ╩ ╩╚═╩╝╚╝╚═╝ ╩ ╚═╝╚═╝╩═╝╚═╝
function StringTools()
-- =====================================================]]
function StringToArraySplit(s, delimiter)
--[[
split_string = StringToArraySplit("Hello World,Jim,Bill,Tom", ",")
Returns = array
-- split_string[1] = "Hello World,)
-- split_string[2] = "Jim"
]]
result = {};
for match in (s..delimiter):gmatch("(.-)"..delimiter) do
table.insert(result, match)
end
return result
end
-- =====================================================]]
function WrapString(Str, Wid) -- wraps text at the nearest space and puts a return char in the space location
--[[ How to use:
Call WrapString(string, Number)
WrapString("Jim is a tall man that lives in Texas. He was raised in North East Texas on 1000 acres from 1970 to 1982. This is a man that knows numbers of great people from a round the world.", 40)
returns "Jim is a tall man that lives in Texas.\n
He was raised in North East Texas on\n
1000 acres from 1970 to 1982. This is a man\n
that knows numbers of great people from\n
a round the world."
]]
local Wider = Wid
local Posx = string.len(Str)
local StrLen = string.len(Str)
local pt = 0
local function FindSpace(MyStr)
local Pos = string.len(MyStr)
local str = MyStr
if string.find(MyStr, " ") ~= nil then
while Pos>0 do
Pos = Pos - 1
if (string.byte(string.sub(str,-1)) == 32) then
break
else
str = string.sub(str, 1, Pos)
end
end
end
return Pos
end
if StrLen > Wider then
while Wider < Posx do
pt = FindSpace(string.sub(Str,1, Wider))
Str = string.sub(Str, 1, pt) .. "\n" .. string.sub(Str, pt +2)
Wider = Wider + Wid
end
end
return Str
end -- function end
-- =====================================================]]
function CleanString(inStr) -- Check for ascii letters below 127
local outStr, str1 = ""
local inStrLen = string.len(inStr)
for i = 1, inStrLen ,1 do
str1 = string.sub(inStr, i, i)
if string.byte(str1) <= 127 then
outStr=outStr .. str1
end
end
return outStr
end -- function end
-- =====================================================]]
function CheckString(YourStr) -- Check string for specal bite chars for HTML
local function FindLetter(TheStr, TestChar)
local outStr = false
local strChar = ""
local TheStrLen = string.len(TheStr)
for i = 1, TheStrLen ,1 do
strChar = string.sub(TheStr, i, i)
if string.byte(strChar) == string.byte(TestChar) then
outStr = true
break
end
end
return outStr
end -- function end
-- =====================================================]]
local StrTest = false
StrTest = SwitchLetter(YourStr, "&") -- Non frendly File Name letters
StrTest = SwitchLetter(YourStr, "#")
StrTest = SwitchLetter(YourStr, "@")
StrTest = SwitchLetter(YourStr, "^")
StrTest = SwitchLetter(YourStr, "$")
return outStr
end -- function end
-- =====================================================]]
function MakeHTMLReady(MyStr) -- fixs string with specal bite chars for HTML
local function SwitchLetter(MyStr, MyChar, NewStr)
local outStr, str1 = ""
local inStrLen = string.len(MyStr)
for i = 1, inStrLen ,1 do
str1 = string.sub(MyStr, i, i)
if string.byte(str1) == string.byte(MyChar) then
outStr=outStr .. NewStr
else
outStr=outStr .. str1
end
end
return outStr
end -- function end
-- =====================================================]]
local outStr = ""
outStr = SwitchLetter(MyStr, "!", "!")
outStr = SwitchLetter(outStr, "#", "#")
outStr = SwitchLetter(outStr, "$", "$")
outStr = SwitchLetter(outStr, "%", "%")
outStr = SwitchLetter(outStr, "&", "&")
outStr = SwitchLetter(outStr, "'", "'")
outStr = SwitchLetter(outStr, "(", "(")
outStr = SwitchLetter(outStr, ")", ")")
outStr = SwitchLetter(outStr, "*", "*")
outStr = SwitchLetter(outStr, "+", "+")
outStr = SwitchLetter(outStr, ",", ",")
outStr = SwitchLetter(outStr, "-", "-")
outStr = SwitchLetter(outStr, ".", ".")
outStr = SwitchLetter(outStr, "/", "/")
outStr = SwitchLetter(outStr, ":", ":")
outStr = SwitchLetter(outStr, ";", ";")
outStr = SwitchLetter(outStr, "<", "<")
outStr = SwitchLetter(outStr, "=", "=")
outStr = SwitchLetter(outStr, ">", ">")
outStr = SwitchLetter(outStr, "?", "?")
outStr = SwitchLetter(outStr, "@", "@")
outStr = SwitchLetter(outStr, "[", "[")
outStr = SwitchLetter(outStr, "]", "]")
outStr = SwitchLetter(outStr, "^", "^")
outStr = SwitchLetter(outStr, "_", "_")
outStr = SwitchLetter(outStr, "`", "`")
outStr = SwitchLetter(outStr, "{", "{")
outStr = SwitchLetter(outStr, "|", "|")
outStr = SwitchLetter(outStr, "}", "}")
outStr = SwitchLetter(outStr, "~", "~")
return outStr
end -- function end
-- =====================================================]]
function SwitchLetter(MyStr, MyChar, NewStr) -- swwap a leter for another letter
local outStr, str1 = ""
local inStrLen = string.len(MyStr)
for i = 1, inStrLen ,1 do
str1 = string.sub(MyStr, i, i)
if string.byte(str1) == string.byte(MyChar) then
outStr=outStr .. NewStr
else
outStr=outStr .. str1
end
end
return outStr
end -- function end
-- =====================================================]]
function PadC(str, lenth) -- Adds spaces to front and back to center text in lenth
-- Local Word = PadC("K", 12) -- returns " K "
if type(str) ~= "string" then
str = tostring(str)
end
if string.len(str) < lenth then
local a = math.floor(lenth - string.len(str) * 0.5) - 2
local b = math.ceil(lenth - string.len(str) * 0.5) - 2
--print ("a = " .. a)
for _ = 1, a, 1 do
str = " " .. str
end
for _ = 1, b, 1 do
str = str .. " "
end
--print ("str len = " .. #str)
end
return str
end -- function end
-- =====================================================]]
function PadR(str, len) -- Adds spaces to Back of string
-- Local Word = Pad("KPSDFKSPSK", 12) -- returns "KPSDFKSPSK "
if type(str) ~= "string" then
str = tostring(str)
end
while string.len(str) < len do
str = str .. " "
end
return str
end -- function end
-- =====================================================]]
function PadL(str, len) -- Adds spaces to Front of string
-- Local Word = Pad("KPSDFKSPSK", 12) -- returns " KPSDFKSPSK"
if type(str) ~= "string" then
str = tostring(str)
end
while string.len(str) < len do
str = " " .. str
end
return str
end -- function end
-- =====================================================]]
function NumberPad(str, front, back) -- Adds spaces to front and zeros to the back of string
local mychar
local a,b,c,d = 0,0,0,0
local x,y,z = "","",""
if type(str) ~= "string" then
str = tostring(str)
end
c = string.len(str)
for i = 1, c, 1 do
mychar = string.byte(string.sub(str, i,i))
if mychar == 46 then
b = i
end
end
-- print("b = " .. b)
if b == 0 then
str = str .. "."
c = c + 1
b = c
end -- if loc
x = string.sub(str, 1, b-1)
y = string.sub(str, b+1)
a = c - b
a = #x
d = #y
if a < front then
front = front - (a - 1)
for _ = 1, front -1 do
x = " " .. x
end -- end for front
end
back = back - (c - b)
for i = 1, back do
y = y .. "0"
end -- end for back
str = x .. "." .. y
return str
end -- function end
-- =====================================================]]
function All_Trim(s) -- Trims spaces off both ends of a string
return s:match( "^%s*(.-)%s*$" )
end -- function end
-- =====================================================]]
function Make_Proper_Case(str)
local str=string.gsub(string.lower(str),"^(%w)", string.upper)
return string.gsub(str,"([^%w]%w)", string.upper)
end
-- =====================================================]]
function ifT(x) -- Converts Boolean True or False to String "Yes" or "No"
-- ===ifT(x)===
if x then
return "Yes"
else
return "No"
end-- if end
end -- function end
-- =====================================================]]
function ifY(x) -- Converts String "Yes" or "No" to Boolean True or False
-- ===ifY(x)===
if string.upper(x) == "YES" then
return true
else
return false
end-- if end
end -- function end
-- =***************************************************=]]
end -- String function end
Seed Documents
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔═╗╔═╗╔═╗╔╦╗ ╔═╗╦ ╦╔╗╔╔═╗╔╦╗╦╔═╗╔╗╔
╚═╗║╣ ║╣ ║║ ╠╣ ║ ║║║║║ ║ ║║ ║║║║
╚═╝╚═╝╚═╝═╩╝ ╚ ╚═╝╝╚╝╚═╝ ╩ ╩╚═╝╝╚╝
function SeedTool()
-- =====================================================]]
-- VECTRIC LUA SCRIPT
-- =====================================================]]
-- Gadgets are an entirely optional add-in to Vectric's core software products.
-- They are provided 'as-is', without any express or implied warranty, and you make use of them entirely at your own risk.
-- In no event will the author(s) or Vectric Ltd. be held liable for any damages arising from their use.
-- Permission is granted to anyone to use this software for any purpose,
-- including commercial applications, and to alter it and redistribute it freely,
-- subject to the following restrictions:
-- 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
-- 2. If you use this software in a product, an acknowledgement in the product documentation would be appreciated but is not required.
-- 3. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
-- 4. This notice may not be removed or altered from any source distribution.
-- Easy Seed Gadget Master is written by Jim Anderson of Houston Texas 2020
-- =====================================================]]
-- require("mobdebug").start()
-- require "strict"
local Tools
-- Global Variables --
local Ver = "1.0" -- Version 7: Aug 2021 - Clean Up and added Ver to Dialog
-- Table Names
Milling = {}
Project = {}
-- =====================================================]]
function main(script_path)
--[[
Gadget Notes: Dec 2019 - My New Gadget
]]
-- Localized Variables --
-- Job Validation --
local job = VectricJob()
if not job.Exists then
DisplayMessageBox("Error: No job loaded")
return false
end
Tools = assert(loadfile(script_path .. "\\EasyGearToolsVer" .. Ver .. ".xlua")) (Tools) -- Load Tool Function
-- Get Data --
-- Calculation --
-- Do Something --
return true
end -- function end
-- ==================== End ============================]]
-- =====================================================]]
end -- Seed Tools function end
Setup Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔═╗╔═╗╔╦╗╦ ╦╔═╗
╚═╗║╣ ║ ║ ║╠═╝
╚═╝╚═╝ ╩ ╚═╝╩
function SetupAndLetter Seeds()
-- =====================================================]]
function LUA_Seed()
-- VECTRIC LUA SCRIPT
-- ==============================================================================
-- Gadgets are an entirely optional add-in to Vectric's core software products.
-- They are provided 'as-is', without any express or implied warranty, and you
-- make use of them entirely at your own risk.
-- In no event will the author(s) or Vectric Ltd. be held liable for any damages
-- arising from their use.
-- Permission is granted to anyone to use this software for any purpose,
-- including commercial applications, and to alter it and redistribute it freely,
-- subject to the following restrictions:
-- 1. The origin of this software must not be misrepresented;
-- you must not claim that you wrote the original software.
-- If you use this software in a product, an acknowledgement in the product
-- documentation would be appreciated but is not required.
-- 2. Altered source versions must be plainly marked as such, and
-- must not be misrepresented as being the original software.
-- 3. This notice may not be removed or altered from any source distribution.
-- ==============================================================================
-- "AppName Here" was written by JimAndi Gadgets of Houston Texas
-- ==============================================================================
-- =====================================================]]
-- require("mobdebug").start()
-- require "strict"
-- =====================================================]]
-- Global variables
-- =====================================================]]
end -- lua function
-- =====================================================]]
function Install_letter()
-- Steps to Install:
-- 1. Download the gadget x.zip that is attached to this post.
-- 2. Rename it from x.zip to x.vgadget
-- 3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
-- It should give you a pop up saying the gadget was installed and you should see x in the Gadgets menu.
-- Image Here
-- Steps for Use:
-- 1. Select a layer that you want to calculate for
-- 2. Enter the cut depth
-- 3. Enter the percentage of coverage for the area that will be filled in
-- 4. Enter the hardner to resin percentage
-- 5. Click the Calculate Button and the results will be displayed below in the Results Pane.
end -- install function
end -- Header function
-- =====================================================]]
Toolpathing Tools
This object is a name-value pair that represents a Document Variable within a VectricJob.
-- =====================================================]]
╔╦╗╔═╗╔═╗╦ ╔═╗╔═╗╔╦╗╦ ╦╔═╗
║ ║ ║║ ║║ ╠═╝╠═╣ ║ ╠═╣╚═╗
╩ ╚═╝╚═╝╩═╝╩ ╩ ╩ ╩ ╩ ╩╚═╝
function Toolpaths()
-- =====================================================]]
function CreateLayerProfileToolpath(name, layer_name, start_depth, cut_depth, tool_dia, tool_stepdown, tool_in_mm)
-- clear current selection
local selection = job.Selection
selection:Clear()
-- get layer
local layer = job.LayerManager:FindLayerWithName(layer_name)
if layer == nil then
DisplayMessageBox("No layer found with name = " .. layer_name)
return false
end
-- select all closed vectors on the layer
if not SelectVectorsOnLayer(layer, selection, true, false, true) then
DisplayMessageBox("No closed vectors found on layer " .. layer_name)
return false
end
-- Create tool we will use to machine vectors
local tool = Tool("Lua End Mill", Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
tool.InMM = tool_in_mm
tool.ToolDia = tool_dia
tool.Stepdown = tool_stepdown
tool.Stepover = tool_dia * 0.25
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC ...
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = tool_dia * 0.5 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass profile options
local profile_data = ProfileParameterData()
-- start depth for toolpath
profile_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
profile_data.CutDepth = cut_depth
-- direction of cut - ProfileParameterData.
-- CLIMB_DIRECTION or ProfileParameterData.CONVENTIONAL_DIRECTION
profile_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- side we machine on - ProfileParameterData.
-- PROFILE_OUTSIDE, ProfileParameterData.PROFILE_INSIDE or
-- ProfileParameterData.PROFILE_ON
profile_data.ProfileSide = ProfileParameterData.PROFILE_OUTSIDE
-- Allowance to leave on when machining
profile_data.Allowance = 0.0
-- true to preserve start point positions, false to reorder start
-- points to minimise toolpath length
profile_data.KeepStartPoints = false
-- true if want to create 'square' external corners on toolpath
profile_data.CreateSquareCorners = false
-- true to perform corner sharpening on internal corners (only with v-bits)
profile_data.CornerSharpen = false
-- true to use tabs (position of tabs must already have been defined on vectors)
profile_data.UseTabs = false
-- length for tabs if being used
profile_data.TabLength = 5.0
-- Thickness for tabs if being used
profile_data.TabThickness = 1.0
-- if true then create 3d tabs else 2d tabs
profile_data.Use3dTabs = true
-- if true in Aspire, project toolpath onto composite model
profile_data.ProjectToolpath = false
-- Create object used to control ramping
local ramping_data = RampingData()
-- if true we do ramping into toolpath
ramping_data.DoRamping = false
-- type of ramping to perform RampingData.RAMP_LINEAR , RampingData.RAMP_ZIG_ZAG
-- or RampingData.RAMP_SPIRAL
ramping_data.RampType = RampingData.RAMP_ZIG_ZAG
-- how ramp is contrained - either by angle or distance RampingData.CONSTRAIN_DISTANCE
-- or RampingData.CONSTRAIN_ANGLE
ramping_data.RampConstraint = RampingData.CONSTRAIN_ANGLE
-- if we are constraining ramp by distance, distance to ramp over
ramping_data.RampDistance = 100.0
-- if we are contraining ramp by angle , angle to ramp in at (in degrees)
ramping_data.RampAngle = 25.0
-- if we are contraining ramp by angle, max distance to travel before 'zig zaging'
-- if zig zaging
ramping_data.RampMaxAngleDist = 15
-- if true we restrict our ramping to lead in section of toolpath
ramping_data.RampOnLeadIn = false
-- Create object used to control lead in/out
local lead_in_out_data = LeadInOutData()
-- if true we create lead ins on profiles (not for profile on)
lead_in_out_data.DoLeadIn = false
-- if true we create lead outs on profiles (not for profile on)
lead_in_out_data.DoLeadOut = false
-- type of leads to create LeadInOutData.LINEAR_LEAD or LeadInOutData.CIRCULAR_LEAD
lead_in_out_data.LeadType = LeadInOutData.CIRCULAR_LEAD
-- length of lead to create
lead_in_out_data.LeadLength = 10.0
-- Angle for linear leads
lead_in_out_data.LinearLeadAngle = 45
-- Radius for circular arc leads
lead_in_out_data.CirularLeadRadius = 5.0
-- distance to 'overcut' (travel past start point) when profiling
lead_in_out_data.OvercutDistance = 0.0
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreateProfilingToolpath(name, tool, profile_data, ramping_data, lead_in_out_data, pos_data, geometry_selector, create_2d_previews, display_warnings )
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
end
return true
end -- end function
-- =====================================================]]
function CreateProfileToolpath(name, start_depth, cut_depth, tool_dia, tool_stepdown, tool_in_mm)
-- Create tool we will use to machine vectors
local tool = Tool("Lua End Mill", Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
tool.InMM = tool_in_mm
tool.ToolDia = tool_dia
tool.Stepdown = tool_stepdown
tool.Stepover = tool_dia * 0.25
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC ...
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = tool_dia * 0.5 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass profile options
local profile_data = ProfileParameterData()
-- start depth for toolpath
profile_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
profile_data.CutDepth = cut_depth
-- direction of cut - ProfileParameterData.
-- CLIMB_DIRECTION or ProfileParameterData.CONVENTIONAL_DIRECTION
profile_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- side we machine on - ProfileParameterData.
-- PROFILE_OUTSIDE, ProfileParameterData.PROFILE_INSIDE or
-- ProfileParameterData.PROFILE_ON
profile_data.ProfileSide = ProfileParameterData.PROFILE_OUTSIDE
-- Allowance to leave on when machining
profile_data.Allowance = 0.0
-- true to preserve start point positions, false to reorder start
-- points to minimise toolpath length
profile_data.KeepStartPoints = false
-- true if want to create 'square' external corners on toolpath
profile_data.CreateSquareCorners = false
-- true to perform corner sharpening on internal corners (only with v-bits)
profile_data.CornerSharpen = false
-- true to use tabs (position of tabs must already have been defined on vectors)
profile_data.UseTabs = false
-- length for tabs if being used
profile_data.TabLength = 5.0
-- Thickness for tabs if being used
profile_data.TabThickness = 1.0
-- if true then create 3d tabs else 2d tabs
profile_data.Use3dTabs = true
-- if true in Aspire, project toolpath onto composite model
profile_data.ProjectToolpath = false
-- Create object used to control ramping
local ramping_data = RampingData()
-- if true we do ramping into toolpath
ramping_data.DoRamping = false
-- type of ramping to perform RampingData.RAMP_LINEAR , RampingData.RAMP_ZIG_ZAG
-- or RampingData.RAMP_SPIRAL
ramping_data.RampType = RampingData.RAMP_ZIG_ZAG
-- how ramp is contrained - either by angle or distance RampingData.CONSTRAIN_DISTANCE
-- or RampingData.CONSTRAIN_ANGLE
ramping_data.RampConstraint = RampingData.CONSTRAIN_ANGLE
-- if we are constraining ramp by distance, distance to ramp over
ramping_data.RampDistance = 100.0
-- if we are contraining ramp by angle , angle to ramp in at (in degrees)
ramping_data.RampAngle = 25.0
-- if we are contraining ramp by angle, max distance to travel before 'zig zaging'
-- if zig zaging
ramping_data.RampMaxAngleDist = 15
-- if true we restrict our ramping to lead in section of toolpath
ramping_data.RampOnLeadIn = false
-- Create object used to control lead in/out
local lead_in_out_data = LeadInOutData()
-- if true we create lead ins on profiles (not for profile on)
lead_in_out_data.DoLeadIn = false
-- if true we create lead outs on profiles (not for profile on)
lead_in_out_data.DoLeadOut = false
-- type of leads to create LeadInOutData.LINEAR_LEAD or LeadInOutData.CIRCULAR_LEAD
lead_in_out_data.LeadType = LeadInOutData.CIRCULAR_LEAD
-- length of lead to create
lead_in_out_data.LeadLength = 10.0
-- Angle for linear leads
lead_in_out_data.LinearLeadAngle = 45
-- Radius for circular arc leads
lead_in_out_data.CirularLeadRadius = 5.0
-- distance to 'overcut' (travel past start point) when profiling
lead_in_out_data.OvercutDistance = 0.0
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreateProfilingToolpath(name, tool, profile_data, ramping_data, lead_in_out_data, pos_data, geometry_selector, create_2d_previews, display_warnings )
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
end
return true
end -- end function
-- =====================================================]]
function CreatePocketingToolpath(name, start_depth, cut_depth, tool_dia, tool_stepdown, tool_stepover_percent, tool_in_mm)
-- Create tool we will use to machine vectors
local tool = Tool("Lua End Mill",Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
tool.InMM = tool_in_mm
tool.ToolDia = tool_dia
tool.Stepdown = tool_stepdown
tool.Stepover = tool_dia * (tool_stepover_percent / 100)
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC,...
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = tool_dia * (tool_stepover_percent / 100) -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass pocketing options
local pocket_data = PocketParameterData()
-- start depth for toolpath
pocket_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
pocket_data.CutDepth = cut_depth
-- direction of cut for offet clearance - ProfileParameterData.CLIMB_DIRECTION or
-- ProfileParameterData.CONVENTIONAL_DIRECTION - NOTE: enum from ProfileParameterData
pocket_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- Allowance to leave on when machining
pocket_data.Allowance = 0.0
-- if true use raster clearance strategy , else use offset area clearance
pocket_data.DoRasterClearance = true
-- angle for raster if using raster clearance
pocket_data.RasterAngle = 0
-- type of profile pass to perform PocketParameterData.PROFILE_NONE ,
-- PocketParameterData.PROFILE_FIRST orPocketParameterData.PROFILE_LAST
pocket_data.ProfilePassType = PocketParameterData.PROFILE_LAST
-- if true we ramp into pockets (always zig-zag)
pocket_data.DoRamping = false
-- if ramping, distance to ramp over
pocket_data.RampDistance = 10.0
-- if true in Aspire, project toolpath onto composite model
pocket_data.ProjectToolpath = false
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- if we are doing two tool pocketing define tool to use for area clearance
local area_clear_tool = nill
-- we just create a tool twice as large for testing here
area_clear_tool = Tool("Lua Clearance End Mill", Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
area_clear_tool.InMM = tool_in_mm
area_clear_tool.ToolDia = tool_dia * 2
area_clear_tool.Stepdown = tool_stepdown * 2
area_clear_tool.Stepover = tool_dia * 2 *(tool_stepover_percent / 100)
area_clear_tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC..
area_clear_tool.FeedRate = 30
area_clear_tool.PlungeRate = 10
area_clear_tool.SpindleSpeed = 20000
area_clear_tool.ToolNumber = 1
area_clear_tool.VBit_Angle = 90.0 -- used for vbit only
area_clear_tool.ClearStepover = tool_dia*2*(tool_stepover_percent/100) -- used for vbit
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreatePocketingToolpath(name,tool,area_clear_tool,pocket_data,pos_data,geometry_selector,create_2d_previews,display_warnings)
if toolpath_id == nill then
DisplayMessageBox("Error creating toolpath")
return false
end
return true
end -- end function
-- =====================================================]]
function CreateDrillingToolpath(name, start_depth, cut_depth, retract_gap, tool_dia, tool_stepdown, tool_in_mm)
-- Create tool we will use to machine vectors
local tool = Tool("Lua Drill", Tool.THROUGH_DRILL) -- BALL_NOSE, END_MILL, VBIT, THROUGH_DRILL
tool.InMM = tool_in_mm
tool.ToolDia = tool_dia
tool.Stepdown = tool_stepdown
tool.Stepover = tool_dia * 0.25
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC, INCHES_MIN, FEET_MIN
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = tool_dia * 0.5 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass profile options
local drill_data = DrillParameterData()
-- start depth for toolpath
drill_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
drill_data.CutDepth = cut_depth
-- if true perform peck drilling
drill_data.DoPeckDrill = retract_gap > 0.0
-- distance to retract above surface when peck drilling
drill_data.PeckRetractGap = retract_gap
-- if true in Aspire, project toolpath onto composite model
drill_data.ProjectToolpath = false
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view,
-- if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreateDrillingToolpath(name,tool,drill_data,pos_data,geometry_selector,create_2d_previews,display_warnings)
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
end
return true
end -- end function
-- =====================================================]]
function CreateVCarvingToolpath(name, start_depth, flat_depth, vbit_angle, vbit_dia, vbit_stepdown, tool_stepover_percent, tool_in_mm)
--[[ -------------- CreateVCarvingToolpath --------------
|
| Create a VCarving toolpath within the program for the currently selected vectors
| Parameters:
| name, -- Name for toolpath
| start_depth -- Start depth for toolpath below surface of material
| flat_depth -- flat depth - if 0.0 assume not doing flat bottom
| vbit_angle -- angle of vbit to use
| vbit_dia -- diameter of VBit to use
| vbit_stepdown -- stepdown for tool
| tool_stepover_percent - percentage stepover for tool
| tool_in_mm -- true if tool size and stepdown are in mm
|
| Return Values:
| true if toolpath created OK else false
|
]]
-- Create tool we will use to machine vectors
local tool = Tool("Lua VBit",Tool.VBIT )-- BALL_NOSE, END_MILL, VBIT
tool.InMM = tool_in_mm
tool.ToolDia = vbit_dia
tool.Stepdown = vbit_stepdown
tool.Stepover = vbit_dia * (tool_stepover_percent / 100)
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC, INCHES_MIN, FEET_MIN
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = vbit_dia * (tool_stepover_percent / 100) * 2 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
-- vcarve_data:SetHomePosition(0, 0, 1.0)
vcarve_data:SetHomePosition(Milling.HomeX, Milling.HomeY, Milling.HomeZGap )
-- vcarve_data.SafeZGap = 0.5
vcarve_data.SafeZGap = Milling.SafeZGap
-- Create object used to pass pocketing options - used for area clearance only
local vcarve_data = VCarveParameterData()
-- start depth for toolpath
vcarve_data.StartDepth = start_depth
-- flag indicating if we are creating a flat bottomed toolpath
vcarve_data.DoFlatBottom = flat_depth > 0.0
-- cut depth for toolpath this is depth below start depth
vcarve_data.FlatDepth = flat_depth
-- if true in Aspire, project toolpath onto composite model
vcarve_data.ProjectToolpath = false
-- set flag indicating we are using flat tool
vcarve_data.UseAreaClearTool = true
-- Create object used to pass pocketing options - used for area clearance only
local pocket_data = PocketParameterData()
-- start depth for toolpath
pocket_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
pocket_data.CutDepth = flat_depth
-- direction of cut for offet clearance - ProfileParameterData.CLIMB_DIRECTION
-- or ProfileParameterData.CONVENTIONAL_DIRECTION - NOTE: enum from ProfileParameterData
pocket_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- if true use raster clearance strategy , else use offset area clearance
pocket_data.DoRasterClearance = false
-- set flag indicating we are using flat tool
pocket_data.UseAreaClearTool = true
-- angle for raster if using raster clearance
pocket_data.RasterAngle = 0
-- type of profile pass to perform PocketParameterData.PROFILE_NONE ,
-- PocketParameterData.PROFILE_FIRST orPocketParameterData.PROFILE_LAST
pocket_data.ProfilePassType = PocketParameterData.PROFILE_LAST
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- if we are doing two tool pocketing define tool to use for area clearance
local area_clear_tool = nil
-- we just create a 10mm end mill
area_clear_tool = Tool("Lua Clearance End Mill",Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
area_clear_tool.InMM = true
area_clear_tool.ToolDia = 10
area_clear_tool.Stepdown = 3
area_clear_tool.Stepover = 3
area_clear_tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC, INCHES_MIN, FEET_MIN
area_clear_tool.FeedRate = 30
area_clear_tool.PlungeRate = 10
area_clear_tool.SpindleSpeed = 20000
area_clear_tool.ToolNumber = 2
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreateVCarvingToolpath(name,tool,area_clear_tool,vcarve_data,pocket_data,pos_data,geometry_selector,create_2d_previews,display_warnings)
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
end
return true
end -- end function
-- =====================================================]]
function CreatePrismToolpath(name, start_depth, cut_depth, vbit_angle, vbit_dia, vbit_stepdown, tool_stepover_percent, tool_in_mm)
--[[ ------------------- CreatePrismToolpath -------------------
|
| Create a prism toolpath within the program for the currently selected vectors
| Parameters:
| name, -- Name for toolpath
| start_depth -- Start depth for toolpath below surface of material
| cut_depth -- cut depth for drilling toolpath
| vbit_angle -- angle of vbit to use
| vbit_dia -- diameter of VBit to use
| vbit_stepdown -- stepdown for tool
| tool_stepover_percent - percentage stepover for tool
| tool_in_mm -- true if tool size and stepdown are in mm
|
| Return Values:
| true if toolpath created OK else false
|
]]
-- Create tool we will use to machine vectors
local tool = Tool("Lua VBit", Tool.VBIT ) -- BALL_NOSE, END_MILL, VBIT
tool.InMM = tool_in_mm
tool.ToolDia = vbit_dia
tool.Stepdown = vbit_stepdown
tool.Stepover = vbit_dia * (tool_stepover_percent / 100)
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC, INCHES_MIN, FEET_MIN
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = vbit_dia * (tool_stepover_percent / 100) * 2 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass profile options
local prism_data = PrismCarveParameterData()
-- start depth for toolpath
prism_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
prism_data.CutDepth = cut_depth
-- direction of cut for offet clearance - ProfileParameterData.CLIMB_DIRECTION
-- or ProfileParameterData.CONVENTIONAL_DIRECTION - NOTE: enum from ProfileParameterData
prism_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- calculate the minimum cut depth to fully form the bevel on the current
-- selection with the current tool
local min_bevel_depth = prism_data:CalculateMinimumBevelDepth(tool, true)
if min_bevel_depth > cut_depth then
DisplayMessageBox("A prism will not be fully formed with a depth of " .. cut_depth .. "\r\n" ..
"A depth of " .. min_bevel_depth .. " is required to fully form the prism"
)
end -- if end
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreatePrismCarvingToolpath(name, tool, prism_data, pos_data, geometry_selector, create_2d_previews, display_warnings)
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
end -- if end
return true
end -- end function
-- =====================================================]]
function CreateFlutingToolpath(name, start_depth, cut_depth, tool_dia, tool_stepdown, tool_in_mm)
--[[ ----------------- CreateFlutingToolpath -----------------
| Create a flutting toolpath within the program for the currently selected vectors
| Parameters:
| name, -- Name for toolpath
| start_depth -- Start depth for toolpath below surface of material
| cut_depth -- cut depth for toolpath
| tool_dia -- diameter of tool to use
| tool_stepdown -- stepdown for tool
| tool_in_mm -- true if tool size and stepdown are in mm
|
| Return Values:
| true if toolpath created OK else false
|
]]
-- Create tool we will use to machine vectors
local tool = Tool("Lua Ball Nose", Tool.BALL_NOSE) -- BALL_NOSE, END_MILL, VBIT, THROUGH_DRILL
tool.InMM = tool_in_mm
tool.ToolDia = tool_dia
tool.Stepdown = tool_stepdown
tool.Stepover = tool_dia * 0.25
tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC, INCHES_MIN, FEET_MIN
tool.FeedRate = 30
tool.PlungeRate = 10
tool.SpindleSpeed = 20000
tool.ToolNumber = 1
tool.VBit_Angle = 90.0 -- used for vbit only
tool.ClearStepover = tool_dia * 0.5 -- used for vbit only
-- Create object used to set home position and safez gap above material surface
local pos_data = ToolpathPosData()
pos_data:SetHomePosition(0, 0, 1.0)
pos_data.SafeZGap = 5.0
-- Create object used to pass fluting options
local fluting_data = FlutingParameterData()
-- start depth for toolpath
fluting_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
fluting_data.CutDepth = cut_depth
-- type of fluting FULL_LENGTH, RAMP_START or RAMP_START_END
fluting_data.FluteType = FlutingParameterData.RAMP_START_END
-- type of ramping RAMP_LINEAR, RAMP_SMOOTH
fluting_data.RampType = FlutingParameterData.RAMP_LINEAR
-- if true use ratio field for controling ramp length else absolute length value
fluting_data.UseRampRatio = false
-- length of ramp as ratio of flute length(range 0 - 1.0)
-- (for start and end - ratio is of half length)
fluting_data.RampRatio = 0.2
-- length to ramp over - if UseRampRatio == false
fluting_data.RampLength = 15
-- if true in Aspire, project toolpath onto composite model
fluting_data.ProjectToolpath = false
-- Create object which can be used to automatically select geometry
local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
local create_2d_previews = true
-- if this is true we will display errors and warning to the user
local display_warnings = true
-- Create our toolpath
local toolpath_manager = ToolpathManager()
local toolpath_id = toolpath_manager:CreateFlutingToolpath(name, tool, fluting_data, pos_data, geometry_selector, create_2d_previews, display_warnings)
if toolpath_id == nil then
DisplayMessageBox("Error creating toolpath")
return false
else
return true
end
end -- end function
-- =====================================================]]
function SelectVectorsOnLayer(layer, selection, select_closed, select_open, select_groups)
-- Please Note: SelectVectorsOnLayer is provided by Vectric and can be found in the SDK and Sample Gadget files.
--[[ ---------------- SelectVectorsOnLayer ----------------
-- | SelectVectorsOnLayer("Stringer Profile", selection, true, falus, falus)
-- | Add all the vectors on the layer to the selection
-- | layer, -- layer we are selecting vectors on
-- | selection -- selection object
-- | select_closed -- if true select closed objects
-- | select_open -- if true select open objects
-- | select_groups -- if true select grouped vectors (irrespective of open / closed state of member objects)
-- | Return Values:
-- | true if selected one or more vectors|
--]]
local objects_selected = false
local warning_displayed = false
local pos = layer:GetHeadPosition()
while pos ~= nil do
local object
object, pos = layer:GetNext(pos)
local contour = object:GetContour()
if contour == nil then
if (object.ClassName == "vcCadObjectGroup") and select_groups then
selection:Add(object, true, true)
objects_selected = true
else
if not warning_displayed then
local message = "Object(s) without contour information found on layer - ignoring"
if not select_groups then
message = message .. "\r\n\r\n" ..
"If layer contains grouped vectors these must be ungrouped for this script"
end -- if end
DisplayMessageBox(message)
warning_displayed = true
end -- if end
end -- if end
else -- contour was NOT nil, test if Open or Closed
if contour.IsOpen and select_open then
selection:Add(object, true, true)
objects_selected = true
elseif select_closed then
selection:Add(object, true, true)
objects_selected = true
end -- if end
end -- if end
end -- while end
-- to avoid excessive redrawing etc we added vectors to the selection in 'batch' mode
-- tell selection we have now finished updating
if objects_selected then
selection:GroupSelectionFinished()
end -- if end
return objects_selected
end -- function end
-- =====================================================]]
end -- Toolpaths function end
-- =====================================================]]
References
Please Note: The base material for the contents found in this WiKi was sourced from Vectric Lua Interface for Gadgets, version 10.0, published August 21, 2019. by Vectric Ltd. Most current document from Vertric can be downloaded at Vertric Developer Information