Example Toolpath Code

These are Code Examples for toolpaths.

Creat_Pocketing_Toolpath

Create a Pocketing toolpath within the program for the currently selected vectors.

 function CreatePocketingToolpath(name, start_depth, cut_depth, tool_dia, tool_stepdown, tool_stepover_percent, tool_in_mm)
--[[ ------------ CreatePocketingToolpath ------------
|| =====================================================
| Create a Pocketing toolpath within the program for the currently selected vectors
| Parameters:
| name, -- Name for toolpath
| start_depth -- Start depth for toolpath below surface of material
| cut_depth -- cut depth for pocket toolpath
| tool_dia -- diameter of end mill to use
| tool_stepdown -- stepdown for tool
| tool_stepover_percent -- percentage stepover for tool
| tool_in_mm -- true if tool size and stepdown are in mm
|| =====================================================]]
-- Return Values:
-- true if toolpath created OK else false


-- Create tool we will use to machine vectors
  local tool = Tool("Lua End Mill",Tool.END_MILL -- BALL_NOSE, END_MILL, VBIT)
  tool.InMM = tool_in_mm
  tool.ToolDia = tool_dia
  tool.Stepdown = tool_stepdown
  tool.Stepover = tool_dia * (tool_stepover_percent / 100)
  tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC,...
  tool.FeedRate = 30
  tool.PlungeRate = 10
  tool.SpindleSpeed = 20000
  tool.ToolNumber = 1
  tool.VBitAngle = 90.0 -- used for vbit only
  tool.ClearStepover = tool_dia * (tool_stepover_percent / 100) -- used for vbit only
-- Create object used to set home position and safez gap above material surface
  local pos_data = ToolpathPosData()
  pos_data:SetHomePosition(0, 0, 5.0)
  pos_data.SafeZGap = 5.0
-- Create object used to pass pocketing options
  local pocket_data = PocketParameterData()
-- start depth for toolpath
  pocket_data.StartDepth = start_depth
-- cut depth for toolpath this is depth below start depth
  pocket_data.CutDepth = cut_depth
-- direction of cut for offet clearance - ProfileParameterData.CLIMB_DIRECTION or
-- ProfileParameterData.CONVENTIONAL_DIRECTION - NOTE: enum from ProfileParameterData
  pocket_data.CutDirection = ProfileParameterData.CLIMB_DIRECTION
-- Allowance to leave on when machining
  pocket_data.Allowance = 0.0
-- if true use raster clearance strategy , else use offset area clearance
  pocket_data.DoRasterClearance = true
-- angle for raster if using raster clearance
  pocket_data.RasterAngle = 0
-- type of profile pass to perform PocketParameterData.PROFILE_NONE ,
-- PocketParameterData.PROFILE_FIRST orPocketParameterData.PROFILE_LAST
  pocket_data.ProfilePassType = PocketParameterData.PROFILE_LAST
-- if true we ramp into pockets (always zig-zag)
  pocket_data.DoRamping = false
-- if ramping, distance to ramp over
  pocket_data.RampDistance = 10.0
-- if true in Aspire, project toolpath onto composite model
  pocket_data.ProjectToolpath = false
-- Create object which can be used to automatically select geometry
  local geometry_selector = GeometrySelector()
-- if this is true we create 2d toolpaths previews in 2d view, if false we dont
  local create_2d_previews = true
-- if this is true we will display errors and warning to the user
  local display_warnings = true
-- if we are doing two tool pocketing define tool to use for area clearance
  local area_clear_tool = nill
-- we just create a tool twice as large for testing here
  area_clear_tool = Tool("Lua Clearance End Mill",Tool.END_MILL) -- BALL_NOSE, END_MILL, VBIT
  area_clear_tool.InMM = tool_in_mm
  area_clear_tool.ToolDia = tool_dia * 2
  area_clear_tool.Stepdown = tool_stepdown * 2
  area_clear_tool.Stepover = tool_dia * 2 *(tool_stepover_percent / 100)
  area_clear_tool.RateUnits = Tool.MM_SEC -- MM_SEC, MM_MIN, METRES_MIN, INCHES_SEC..
  area_clear_tool.FeedRate = 30
  area_clear_tool.PlungeRate = 10
  area_clear_tool.SpindleSpeed = 20000
  area_clear_tool.ToolNumber = 1
  area_clear_tool.VBitAngle = 90.0 -- used for vbit only
  area_clear_tool.ClearStepover = tool_dia*2*(tool_stepover_percent/100) -- used for vbit
-- Create our toolpath
  local toolpath_manager = ToolpathManager()
  local toolpath_id = toolpath_manager:CreatePocketingToolpath(name, tool, area_clear_tool, pocket_data, pos_data, 
                                                               geometry_selector, create_2d_previews, display_warnings)
  if toolpath_id == nill then
     DisplayMessageBox("Error creating toolpath")
     return false
  end -- if end
  return true
end -- function end

References

Please Note: The base material for the contents found in this WiKi was sourced from Vectric Lua Interface for Gadgets, version 2.05, published September 12, 2018. by Vectric Ltd. Most current document from Vertric can be downloaded at Vertric Developer Information